Abdalrahman Rashed Alajmi

Mr. Abdalrahman Rashed Alajmi

Mechanical & Aerospace Engineering, University of Strathclyde, Glasgow, Glasgow City, UK
+1
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 May 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
Rajab AbousninaRajab Abousnina
Rajab Abousnina
ASAbdullah Shalwan
Abdullah Shalwan
SASultan Alajmi
Sultan Alajmi
GEGolnaz Alipour Alipour Esgandani
Golnaz Alipour Alipour Esgandani
Geoffrey WillGeoffrey Will
Geoffrey Will
Progress in engineering research has shifted the interest from traditional monolithic materials to modern materials such as fibre reinforced composites (FRC). This paradigm shift can be attributed to the unique mechanical characteristics of FRCs such as high strength to weight ratio, good flexural strength, and fracture toughness. At present, synthetic composites dominate the automotive, aerospace, sporting, and construction industries despite serious drawbacks such as costly raw materials, high manufacturing costs, non-recyclability, toxicity, and non-biodegradability. To address these issues, naturally occurring plant fibres (such as jute, hemp, sisal) are being increasingly researched as potential reinforcements for biodegradable or non-biodegradable polymer matrices to produce environmentally friendly composites. In this study, sisal fibres were selected owing to their low production costs, sustainability, recyclability, and biodegradability. The hydrothermal ageing and mechanical characteristics of sisal fibre-reinforced epoxy (SFRE) composites were determined and compared with glass fibre-reinforced epoxy (GFRE) synthetic composites. Moreover, a first-of-its-kind numerical model have been developed to study the hydrothermal ageing and mechanical characteristics of SFRE, along with GFRE, using ANSYS software. Moreover, microstructural analysis of flexural tested GFRE and SFRE samples were carried out to identify the microstructural properties of the composites. Both experimental and numerical results exhibited an influence of short- or long-term hydrothermal treatment on the flexural properties of glass and sisal fibre-based composites. In the case of GFRE, the moisture uptake and fibre-matrix de-bonding existed, but it is less severe as compared to the SFRE composites. It was found that the dosage of sisal fibres largely determines the ultimate mechanical performance of the composite. Nonetheless, the experimental and numerical flexural strengths of SFRE were comparable to GFRE composites. This exhibited that the SFRE composites possess the potentiality as a sustainable material for advanced applications.

23 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
ASA. Shalwan
A. Shalwan
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
Belal YousifBelal Yousif
Belal Yousif
In recent years, there has been an increasing demand for engineering materials that possess good mechanical and thermal properties and are cheap an d environmentally friendly. From an industrial and academic point of view, there is a need to study the heat conductivity of newly developed polymer composites and the influence of porosity on the insulation performance of polymer composites. Experimental and theoretical studies were conducted on mainly sisal/glass fibre gypsum composites with different fibre volumes (0, 20, 25, 30, and 35 wt.%). The outcomes from the theoretical model in ANSYS have shown that there is a high possibility to simulate the experimental work and high accuracy for reflecting the experimental findings. Moreover, the results show that natural fibre polymer composites with a high-volume fraction of natural fibres have higher insulation performance than synthetic polymer composites with the same volume fraction of synthetic fibres. Furthermore, the results suggest and support that the improved performance of natural fibre-based composites was due at least in part to the internal porosity of the fibres.

6 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
HHHouria Hernoune
Houria Hernoune
Benchaa BenabedBenchaa Benabed
Benchaa Benabed
Rajab AbousninaRajab Abousnina
Rajab Abousnina
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
AAAbdullah M Gh Alfadhili
Abdullah M Gh Alfadhili
ASAbdullah Shalwan
Abdullah Shalwan
This paper presents an experimental and numerical study into the shear response of brick masonry triplet prisms under different levels of precompression, as well as samples reinforced with carbon fiber-reinforced polymer (CFRP) strips. Masonry triplets were constructed with two different mortar mix ratios (1:1:3 and 1:1:5). In this study, finite element models for the analysis of shear triplets are developed using detailed micro-modelling (DMM) approach and validated with the experimental data. The failure mechanisms observed in the masonry triplets were simulated using a coupled XFEM-cohesive behaviour approach in ABAQUS finite element software. The nonlinear behaviour of mortar and brick was simulated using the concrete damaged plasticity (CDP) constitutive laws. The cohesive element with zero thicknesses was employed to simulate the behaviour of the unit–mortar interfaces. The extended finite element method (XFEM) was employed to simulate the crack propagation in the mortar layer without an initial definition of crack location. CFRP strips were simulated by 3D shell elements and connected to masonry elements by an interface model. The changes in failure mechanism and shear strength are calculated for varying types of mortar and fiber orientation of CFRP composite. Based on this study, it was concluded that the ultimate shear strength of masonry triplets is increased due to the external bonding of CFRP strips. The performance of masonry specimens strengthened with CFRP strips is assessed in terms of gain in shear strength and post-peak behaviour for all configurations and types of mortar considered. The comparison of FE and experimental results proved that the models have the potential to be used in practice to accurately predict the shear strength and reflect damage progression in unreinforced and CFRP-reinforced masonry triplets under in-plane loading, including the debonding of the CFRP reinforcement. Additionally, XFEM was found to be a powerful technique to be used for the location of crack initiation and crack propagation in the mortar layer.

11 March 2025 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
AHAhmed M. Hassan
Ahmed M. Hassan
MAMohammed Azeez Alomari
Mohammed Azeez Alomari
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
ASAbdellatif Mohammad Sadeq
Abdellatif Mohammad Sadeq
FAFaris Alqurashi
Faris Alqurashi
MFMujtaba A. Flayyih
Mujtaba A. Flayyih

26 August 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
FAFahad Aljuaydi
Fahad Aljuaydi
Rajab M. AbousninaRajab M. Abousnina
Rajab M. Abousnina
OMAR ALAJARMEHOMAR ALAJARMEH
OMAR ALAJARMEH
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
There are significant environmental and health consequences associated with oil-contaminated sand due to its toxic and persistent nature. The impacts include disrupted ecosystems with harm to plants and animals and contamination of water sources, requiring immediate and sustained remediation. Using oil-contaminated sand in construction addresses waste management and promotes sustainability by reducing waste, protecting the environment, saving energy, and driving innovation. This study investigates the impact of crude oil-contaminated sand on concrete’s physical and mechanical characteristics. It focuses on assessing the impact of incorporating four different fibres (Forta Ferro PP, ReoShore 45 PP, glass, and steel fibres) and finding the optimal quantity (0.1, 0.2, 0.3, 0.4 or 0.5%) to improve the physical and mechanical properties of concrete prepared with sand contaminated by crude oil. The impact of crude oil on the bond strength between fibres and concrete was examined. Additionally, the effect of crude oil on heat flow and cumulative heat was analysed. The results demonstrated that increasing oil content decreases concrete density and compressive strength. Nevertheless, the findings indicated that sand contaminated with 10% oil is suitable for low-strength concrete applications. Incorporating 0.1% of Forta Ferro PP, glass, and ReoShore 45 PP fibres had a negligible impact on the mechanical properties of concrete contaminated with 10% oil. Comparatively, steel fibres enhanced the concrete’s compressive strength by 30% at 0.1%, and the flexural strength improved by 9.6% at 0.5%. Concrete with a 10% crude oil content reinforced with steel fibres hinders fracture stabilisation and load transfer, making it suitable as a sustainable material for low-strength civil engineering applications.

1 February 2026
Verified
Book Chapter
Open access
Abdalrahman Rashed AlajmiAbdalrahman Rashed Alajmi
Abdalrahman Rashed Alajmi
MRMohamad Rida
Mohamad Rida
NKNicolas Kelly
Nicolas Kelly
Power outages during peak hours in Kuwait can seriously impact the comfort of indoor spaces, especially during the intense summer heat. When cooling systems go offline, even for a short time, indoor temperatures can rise quickly, making homes uncomfortable and potentially unsafe. This study looks at how these energy limitations affect thermal comfort inside buildings and proposes a cyber-physical energy assessment framework aimed at improving energy efficiency while reducing discomfort during critical periods. We examine household temperature conditions, adaptive comfort techniques, and real-time power usage data using a mixed-method approach. Results show that outages during peak hours cause extreme heat stress, which causes residents to use ineffective cooling techniques. To help buildings better cope with power outages, the proposed cyber-physical framework brings together energy management systems, smart sensors, and predictive modeling. By combining these elements, the study aims to strike a balance between keeping occupants comfortable and using energy more efficiently. It also offers practical insights that can benefit homeowners, energy planners, and policymakers looking to make buildings more resilient and sustainable in challenging climates. This study highlights the urgent need to adopt smart energy solutions that can improve everyday living conditions in Kuwait while also addressing broader challenges related to long-term energy sustainability.