Abdulsalam Abdulaziz Al-Tamimi

Dr. Abdulsalam Abdulaziz Al-Tamimi

King Saud University, Riyadh, Ar Riyāḑ, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2017 in Virtual and Physical Prototyping
Verified
Journal Article
Closed access
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
PFPaulo Rui Fernandes
Paulo Rui Fernandes
CPChris Peach
Chris Peach
Glen CooperGlen Cooper
Glen Cooper
CDCarl Diver
Carl Diver
Paulo BartoloPaulo Bartolo
Paulo Bartolo
Fixation devices are commonly used for bone fracture treatments. These implants are made of biocompatible materials such as stainless steel, cobalt, titanium and its alloys (e.g. CoCrMo and Ti-6Al-4V). However, metallic medical implants present higher stiffness compared to bone, contributing to the stress shielding phenomena compromising bone integrity. This paper explores the use of topology optimization to create novel bone fixation designs with reduced material volumes. Results show that for certain levels of volume reductions, which depends on the load condition, it is possible to obtain designs that minimise the stress shielding phenomena.

24 February 2020 in Progress in Additive Manufacturing
Verified
Journal Article
Closed access
PDF file
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
HAHenrique De Amorim Almeida
Henrique De Amorim Almeida
Paulo BartoloPaulo Bartolo
Paulo Bartolo

25 May 2019 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
Boyang HuangBoyang Huang
Boyang Huang
CVCian Vyas
Cian Vyas
MHMiguel Hernandez
Miguel Hernandez
CPChris Peach
Chris Peach
Paulo BartoloPaulo Bartolo
Paulo Bartolo
Metallic bone plates are commonly used as a medical implant to treat bone fractures. The gold standard materials for these implants are biocompatible 316L stainless steel, cobalt chromium, titanium and its alloys (e.g. CoCrMo and Ti6Al4V). However, the main disadvantage of these implants is the material stiffness mismatch between the implant and bone. This mismatch may negatively affect the biological processes in bone healing. This paper investigates topology optimization to produce plates with reduced equivalent stiffness and the fabrication of optimised plate designs using an electron beam melting (EBM) system. Non-post-processed EBM plates were assessed against commercially available bone fixation plates in terms of mechanical and biological characteristics. Results show that some redesigned produced plates present mechanical properties similar to the cortical bone and that there is no need to post-process the produced plates in order to establish a good biological bonding with the surrounding tissue.

19 June 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
GSGaurav Saxena
Gaurav Saxena
SKSanjay Kumar
Sanjay Kumar
SCSANJAY CHINTAKINDI
SANJAY CHINTAKINDI
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
Mustufa Haider AbidiMustufa Haider Abidi
Mustufa Haider Abidi
YAYogendra Kumar Awasthi
Yogendra Kumar Awasthi
In this article, a UWB metasurface absorber is designed for a frequency range of 6.75GHz-14.5GHz. The absorber consists of a simple unit cell size of 0.265λ 0 ×0.265λ 0 ×0.103λ 0 on a single-layer FR-4 substrate with a thickness of 3.1mm. It has greater than 90.0% absorbance. Next, an X-band circularly polarized MIMO antenna is developed on an FR-4 substrate with a thickness of 1.0mm. The antenna has dimensions of 0.966λ 0 ×0.766λ 0 ×0.053λ 0 . The MIMO antenna’s S-parameters, radiating efficiency, gain, and diversity parameters are further indicators of its usefulness. The designed metasurface is also employed as a tool to enhance the peak gain of the proposed MIMO antenna up to 8.8dBi and reduce radar cross-section by 18dBm 2 , by placing the metasurface array superstrate and down correspondingly. The simulated and measured results for the metasurface and antenna, both individually and collectively, are more harmonious, demonstrating the applicability of the suggested designs for IoT over satellite, military applications, and identifying blood clots in CT-scan applications.

14 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
MTMehdi Tlija
Mehdi Tlija
Mustufa Haider AbidiMustufa Haider Abidi
Mustufa Haider Abidi
Arfat AnisArfat Anis
Arfat Anis
Abdelatty AbdelgawadAbdelatty Abdelgawad
Abdelatty Abdelgawad
Material extrusion (ME) is an additive manufacturing technique capable of producing functional parts, and its use in multi-material fabrication requires further exploration and expansion. The effectiveness of material bonding is one of the main challenges in multi-material fabrication using ME due to its processing capabilities. Various procedures for improving the adherence of multi-material ME parts have been explored, such as the use of adhesives or the post-processing of parts. In this study, different processing conditions and designs were investigated with the aim of optimizing polylactic acid (PLA) and acrylonitrile–butadiene–styrene (ABS) composite parts without the need for pre- or post-processing procedures. The PLA-ABS composite parts were characterized based on their mechanical properties (bonding modulus, compression modulus, and strength), surface roughness (Ra, Rku, Rsk, and Rz), and normalized shrinkage. All process parameters were statistically significant except for the layer composition parameter in terms of Rsk. The results show that it is possible to create a composite structure with good mechanical properties and acceptable surface roughness values without the need for costly post-processing procedures. Furthermore, the normalized shrinkage and the bonding modulus were correlated, indicating the ability to utilize shrinkage in 3D printing to improve material bonding.

20 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
Adi paX PandzicAdi paX Pandzic
Adi paX Pandzic
EKEdin Kadric
Edin Kadric
The material extrusion fused deposition modeling (FDM) technique has become a widely used technique that enables the production of complex parts for various applications. To overcome limitations of PLA material such as low impact toughness, commercially available materials such as UltiMaker Tough PLA were produced to improve the parent PLA material that can be widely applied in many engineering applications. In this study, 3D-printed parts (test specimens) considering six different printing parameters (i.e., layer height, wall thickness, infill density, build plate temperature, printing speed, and printing temperature) are experimentally investigated to understand their impact on the mechanical properties of Tough PLA material. Three different standardized tests of tensile, flexural, and compressive properties were conducted to determine the maximum force and Young’s modulus. These six properties were used as responses in a design of experiment, definitive screening design (DSD), to build six regression models. Analysis of variance (ANOVA) is performed to evaluate the effects of each of the six printing parameters on Tough PLA mechanical properties. It is shown that all regression models are statistically significant (p<0.05) with high values of adjusted and predicted R2. Conducted confirmation tests resulted in low relative errors between experimental and predicted data, indicating that the developed models are adequately accurate and reliable for the prediction of tensile, flexural, and compressive properties of Tough PLA material.