The present paper shows a detailed analysis on the thermally stimulated processes in barium modified SrBi2Nb2O9 ferroelectric bi-layered perovskite, which is one of the most promising candidates for non-volatile random access memory applications because of its excellent fatigue-resistant properties. A numerical method is used to separate the real pyroelectric current from the other thermally stimulated processes. A discharge due to the space-charge injected during the poling process, the pyroelectric response, and a conductive process are discussed in a wide temperature range from ferroelectric to paraelectric phase. The pyroelectric response is separated from the other components to evaluate the polarization behavior and some pyroelectric parameters. The remanent polarization, the pyroelectric coefficient, and the merit figure are evaluated, which show good results.
In this work, TiN/Ti(C,N)/Al2O3 multilayer coatings were deposited using an industrial-scale thermal CVD system. Two polymorphs of Al2O3, the stable α- and the metastable κ-Al2O3, were obtained by the deposition of specific bonding layers at the Al2O3/Ti(C,N) interface. The comparable hardness and elastic moduli of α- and κ-Al2O3 multilayer coatings were measured. The tribological behavior of Al2O3 multilayer coatings was studied at room temperature using 24CrMoV5-1 balls; friction coefficients were comparable for both α- and κ-Al2O3 multilayer coatings. As a result of the relatively high hardness of coatings and the generation of abrasive wear particles, larger wear tracks were observed on balls. In Rockwell C tests, good adhesion at Al2O3/Ti(C,N)-based layer’s interface was reported in κ-Al2O3 multilayer coatings, which could be attributed to the deposition of κ-bonding layers consisting of needle-shaped grains. The cutting performances in the turning-roughing of 24CrMoV5-1 steel under different parameters—cutting speed, feed, and depth of cut—were investigated. Herein, κ-Al2O3 multilayer coatings showed the longest tool life, double of that of a commercial CVD Al2O3 multilayer coating. The results obtained could enrich the existing database for the development of prediction models of tool wear and machined surface quality and help improve tool performance for the machining of 24CrMoV5-1 steel.
30 September 2022 in Solar Energy Materials and Solar Cells