A. Martinez-Garcia

Dr. A. Martinez-Garcia

Centro de Investigación en Materiales Avanzados, Chihuahua City, Mexico
orcid
Departamento de Metalurgia e Integridad Estructural, Centro ...

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2023 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
A. Martinez-GarciaA. Martinez-Garcia
A. Martinez-Garcia
IEI. Estrada-Guel
I. Estrada-Guel
ERE. Reguera
E. Reguera
RAR. Amaro-Hernandez
R. Amaro-Hernandez
SGS. González
S. González
RMR. Martínez-Sánchez
R. Martínez-Sánchez

13 November 2024 in Metals
Verified
Journal Article
Open access
PDF file
XAX. Atanacio-Sánchez
X. Atanacio-Sánchez
C G Garay-ReyesC G Garay-Reyes
C G Garay-Reyes
A. Martinez-GarciaA. Martinez-Garcia
A. Martinez-Garcia
IEIvanovich Estrada-Guel
Ivanovich Estrada-Guel
JMJose Manuel Mendoza-Duarte
Jose Manuel Mendoza-Duarte
Roberto Martínez-SánchezRoberto Martínez-Sánchez
Roberto Martínez-Sánchez
The present research focuses on enhancing the mechanical properties and the electrical conductivity of alloys corresponding to the Al-Mg-Zn (two different compositions) and Al-Mg-Si systems, compared with the commercial 6201-T8 and 1350-H16 alloys, by using a novel approach based on T8 tempering (solution heat treated, cold worked, then artificially aged). After T8 tempering, the Al-Mg-Zn and Al-Mg-Si alloy systems show a better combination of electrical and mechanical properties, with an enhancement of the electrical conductivity by about 2.8% compared to that of 1350 alloy and 13% higher than for the 6201 alloy series. All studied alloys exhibit better mechanical properties than 1350-H16 and are similar to those of 6201-T8.

15 June 2024 in Electrochimica Acta
Verified
Journal Article
Closed access
A. Martinez-GarciaA. Martinez-Garcia
A. Martinez-Garcia
VOVíctor M. Orozco-Carmona
Víctor M. Orozco-Carmona
JMJose Manuel Mendoza-Duarte
Jose Manuel Mendoza-Duarte
EJE.A. Juarez-Arellano
E.A. Juarez-Arellano
SGS. González
S. González
RSR. Martínez Sánchez
R. Martínez Sánchez

1 November 2025 in Metals
Verified
Journal Article
Open access
PDF file
GRGustavo Rodríguez
Gustavo Rodríguez
JRJuan Pablo Flores-De los Rios Flores-De los Rios
Juan Pablo Flores-De los Rios Flores-De los Rios
JHJuan Francisco Lopez de Lara Herrera
Juan Francisco Lopez de Lara Herrera
MSMario Sanchez-Carrillo
Mario Sanchez-Carrillo
HMHansel Manuel Medrano-Prieto
Hansel Manuel Medrano-Prieto
Roberto Martínez-SánchezRoberto Martínez-Sánchez
Roberto Martínez-Sánchez
Al–Cu–Mg composites reinforced with sub-micron tungsten carbide (WC) particles were synthesized by powder metallurgy and subjected to T6 heat treatment to clarify the interplay between dispersion strengthening and precipitation hardening. Composites with 1–3 wt.% WC (average size 0.8 μm) were solution-treated at 540 °C for 3 h, water-quenched, and aged at 195 °C for up to 100 h. Microstructural analyses confirmed a uniform distribution of WC and demonstrated that its presence did not modify the dissolution–precipitation sequence of the Al-Cu-Mg matrix. Transmission Electron Microscopy observations provided direct evidence of θ′ (Al2Cu) precipitates. The 3 wt.% WC composite reached peak hardness after 5 h (78 HRF), a 15% increase over the T6-treated unreinforced alloy, and exhibited a 40% higher yield strength (330 MPa). These improvements were attributed to the combined effects of Orowan strengthening and age-hardening precipitates (θ′). The results demonstrate that integrating powder metallurgy, sub-micron WC reinforcement, and T6 treatment is an effective route to enhance strength in Al–Cu–Mg alloys without delaying aging kinetics.

18 April 2026 in Coatings
Verified
Journal Article
Open access
PDF file
A. Martinez-GarciaA. Martinez-Garcia
A. Martinez-Garcia
SGSergio González
Sergio González
JMJose Manuel Mendoza-Duarte
Jose Manuel Mendoza-Duarte
CECynthia Deisy Gómez Esparza
Cynthia Deisy Gómez Esparza
M.A RuizEsparza-RodriguezM.A RuizEsparza-Rodriguez
M.A RuizEsparza-Rodriguez
Roberto Martínez-SánchezRoberto Martínez-Sánchez
Roberto Martínez-Sánchez
The present study examined the interactions between the structure, microstructure and mechanical properties of CrMnFeCoNi, CrMnFeCoNiV0.5 and CrMnFeCoNiMo0.5 High-Entropy Alloys (HEAs). Starting from elemental powders, the HEAs were obtained by high-energy ball milling, followed by vacuum annealing at 1373 K for 1 h. After milling, a binary FCC-BCC solid solution was formed; the samples showed hardness values ranging from 800 to 973 HV. Evidence shows that annealing HEAs reduced the solubility of V and Mo in the alloys’ FCC structure. Additionally, the Cr content in the FCC phase also decreases. The carbon derived from the decomposition of the process control agent was trapped in the interstices of the HEA structure during mechanical alloying. This amount of carbon is sufficient to form carbides during annealing. The thermodynamic stability of the precursor elements in HEAs is a determining factor in MxCy-type formation. The hardness response of HEAs was associated with the HEAs’ structure, while the elastic modulus was affected by their microstructure.

24 July 2024 in Microscopy and Microanalysis
Verified
Journal Article
Open access
PDF file
A. Martinez-GarciaA. Martinez-Garcia
A. Martinez-Garcia
CGC G Garay-Reyes
C G Garay-Reyes
XAX Atanacio-Sánchez
X Atanacio-Sánchez
LGL Baylón García
L Baylón García
PGP A Guerrero-Seañez
P A Guerrero-Seañez
RMR Martínez-Sánchez
R Martínez-Sánchez
Hydrogen is an attractive energy vector and a possible substitute for fossil fuels for energy production [ 1]. In hydrogen energy storage and conversion applications, metal hydrides (MH) are studied as one of the materials with the greatest potential as power sources for vehicles with better electrochemical properties than Ni-Cd batteries [ 2]. In addition, they have recently been designed for uses such as hydrogen sensors, switchable mirrors, rechargeable batteries, and other applications [ 3].