Andrii Koveria

Dr. Andrii Koveria

Chemistry and Chemical Engineering, Dnipro University of Technology, Dnipro, Dnipropetrovs’ka Oblast’, Ukraine
orcid
Dr., Associate Professor. Department of Chemistry and Chemic...

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
Oleg BazalukOleg Bazaluk
Oleg Bazaluk
Lina KieushLina Kieush
Lina Kieush
Andrii KoveriaAndrii Koveria
Andrii Koveria
JSJohannes Schenk
Johannes Schenk
APAndreas Pfeiffer
Andreas Pfeiffer
Vasyl LozynskyiVasyl Lozynskyi
Vasyl Lozynskyi
Biocoke has the potential to reduce the fossil-based materials in metallurgical processes, along with mitigating anthropogenic CO2- and greenhouse gas (GHG) emissions. Reducing those emissions is possible by using bio-based carbon, which is CO2-neutral, as a partial replacement of fossil carbon. In this paper, the effect of adding 5, 10, 15, 30, and 45 wt.% biomass pellets on the reactivity, the physicomechanical, and electrical properties of biocoke was established to assess the possibility of using it as a fuel and reducing agent for a blast furnace (BF) or as a carbon source in a submerged arc furnace (SAF). Biocoke was obtained under laboratory conditions at final coking temperatures of 950 or 1100 °C. Research results indicate that for BF purposes, 5 wt.% biomass additives are the maximum as the reactivity increases and the strength after reaction with CO2 decreases. On the other hand, biocoke’s physicomechanical and electrical properties, obtained at a carbonization temperature of 950 °C, can be considered a promising option for the SAF.

12 June 2023 in Energies
Verified
Journal Article
Open access
PDF file
Lina KieushLina Kieush
Lina Kieush
JSJohannes Schenk
Johannes Schenk
Andrii KoveriaAndrii Koveria
Andrii Koveria
AHAndrii Hrubiak
Andrii Hrubiak
HHHorst Hopfinger
Horst Hopfinger
HZHeng Zheng
Heng Zheng
The influence of different carbon sources, including anthracite, calcined petroleum coke, three samples of high-temperature coke, biochar, and a mixture of 50 wt.% biochar and 50 wt.% coke, on slag foaming behavior was studied. The slag’s composition was set to FeO-CaO-Al2O3-MgO-SiO2, and the temperature for slag foaming was 1600 °C. The effect of the carbon sources was evaluated using foaming characteristics (foam height, foam volume, relative foaming height, and gas fraction), X-ray diffraction (XRD), chemical analysis of the slag foams, Mossbauer spectroscopy, observation by scanning electron microscope (SEM), and energy-dispersive spectroscopy (EDS) mapping. Different foaming phenomena were found among conventional sources, biochar as a single source, and the mixture of coke and biochar. Biochar showed the most inferior foaming characteristics compared to the other studied carbon sources. Nevertheless, the slag foaming process was improved and showed slag foaming characteristics similar to results obtained using conventional carbon sources when the mixture of 50 wt.% coke and 50 wt.% biochar was used. The XRD analysis revealed a difference between the top and bottom of the slag foams. In almost all cases, a maghemite crystalline phase was detected at the top of the slag foams, indicating oxidation; metallic iron was found at the bottom. Furthermore, a difference in the slag foam (mixture of coke and biochar) was found in the presence of such crystalline phases as magnesium iron oxide (Fe2MgO4) and magnetite (Mg0.4Fe2.96O4). Notwithstanding the carbon source applied, a layer between the foam slag and the crucible wall was found in many samples. Based on the SEM/EDS and XRD results, it was assumed this layer consists of gehlenite (Ca2(Al(AlSi)O7) and two spinels: magnesium aluminate (MgAl2O4) and magnesium iron oxide (Fe2MgO4).

6 April 2023 in Metals
Verified
Journal Article
Open access
PDF file
Lina KieushLina Kieush
Lina Kieush
JSJohannes Schenk
Johannes Schenk
Andrii KoveriaAndrii Koveria
Andrii Koveria
GRGerd Rantitsch
Gerd Rantitsch
AHAndrii Hrubiak
Andrii Hrubiak
HHHorst Hopfinger
Horst Hopfinger
Conventional (anthracite, calcined petroleum coke, and coke) and non-conventional (biochar, and biocokes (3 wt.% torrefied wood, and 3 wt.% petroleum coke + 3 wt.% charcoal)) carbon-bearing sources have been studied for their use in electric arc furnace (EAF)-based steel production. Commonly, for the use of carbon sources in EAFs, one of the important properties is the content of fixed carbon, the release of volatiles as well as the elemental composition of inorganics. The properties of six carbon sources were analyzed by determining the proximate analysis, X-ray fluorescence analysis (XRF), coke reactivity index (CRI), and strength after reaction with CO2 (CSR), Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joyner–Halenda (BJH) pore size and volume analysis, ash chemical analysis, optical and scanning microscopy, Raman spectroscopy and X-ray diffraction (XRD) analysis. The results indicate biocoke as a promising option to replace conventional carbon-bearing sources. In the sample set, the fixed carbon, volatiles, and ash content of the biocokes were similar despite the total difference in additives. Additionally, the use of additives did not significantly affect the biocoke reactivity indices, but slightly decreased the strength after the reaction with CO2. Carbon-bearing sources have been characterized in terms of their structural properties. XRD analysis revealed that the amount of disordered carbon increased in the order: coke < calcined petroleum coke ~ biocoke (3 wt.% torrefied wood) < biocoke (3 wt.% petroleum coke + 3 wt.% charcoal) < biochar. The results obtained on the physical, chemical, and structural properties of carbon sources are the basis for further research on the behavior of slag foaming.

1 October 2020 in Canadian Metallurgical Quarterly
Verified
Journal Article
Closed access
Andrii KoveriaAndrii Koveria
Andrii Koveria
Lina KieushLina Kieush
Lina Kieush
OSOlena Svietkina
Olena Svietkina
YPYevhen Perkov
Yevhen Perkov
An increase in steel production causes an increase in the use of carbon fuels and reducing agents, which in turn leads to greenhouse gas emissions. It is possible to reduce the environmental impact without compromising the quality of metallurgical products through the use of renewable carbon materials. In this paper, the applicability of biocoke production for various metallurgical processes has been considered. The fuels and reducing agents required in the main metallurgical industries are specified and the practice of adding biomass to a coal blend for coking is presented. The current biomass application to producing fuel and reducing agents in coal blends reveals their real potential for obtaining products of the required quality. The use of biomass as a component of coal blends is most effective when it is in a compressed or preliminary carbonised form. The outlined critical review is the base for conducting research on the production of biocoke using various biomass additives. The most promising sources for biocoke production are found to be biomass pellets.

11 August 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Lina KieushLina Kieush
Lina Kieush
Andrii KoveriaAndrii Koveria
Andrii Koveria
JSJohannes Schenk
Johannes Schenk
Kanay RysbekovKanay Rysbekov
Kanay Rysbekov
Vasyl LozynskyiVasyl Lozynskyi
Vasyl Lozynskyi
AMAzamat Matayev
Azamat Matayev
The coalification rank of the coal blend components and their caking properties initially impact the coke’s quality. In part, the quality of coke depends on the technological parameters of the coke production technology, such as the method of blend preparation, the coking condition, the design features of the coke ovens, and the technique used for post-oven treatment. Therefore, to improve the coke quality, the main attention is paid to the quality of the coal blend. The petrographic analysis is the simplest and most reliable way to control coal quality indicators under industrial conditions. In this paper, the effect of nine industrial blends on coke quality using petrographic analysis has been studied. Additionally, this paper addresses the efficient use of coals and the preparation of coal mixtures under industrial conditions, which contributes to the sustainability of cokemaking. For the preparation of blends, 17 coals were used, for which, in addition to petrographic and proximate analyzes, the maximum thickness of the plastic layer was determined. Industrially produced cokes were analyzed for coke reactivity index (CRI), coke strength after reaction with CO2 (CSR), and Micum indices (M25 and M10). It has been established that the petrographic properties of coal blends are reliable parameters for assessing the quality of coke under conditions of an unstable raw material base, multi-component blends, and changes in coking regimes. Moreover, the research results have shown that to ensure the rational use of coals in the preparation of coal blends to achieve the required coke quality and consequently the sustainability of cokemaking, it is necessary to consider not only the mean reflectance of vitrinite but the proximate and caking properties of coals.

30 June 2022 in Mining of Mineral Deposits
Verified
Journal Article
Open access
Lina KieushLina Kieush
Lina Kieush
Andrii KoveriaAndrii Koveria
Andrii Koveria
MBMaksym Boyko
Maksym Boyko
MYMaksym Yaholnyk
Maksym Yaholnyk
AHAndrii Hrubiak
Andrii Hrubiak
VMVolodymyr Moklyak
Volodymyr Moklyak
Purpose. The research purpose is to substantiate the use of biocoke as a fuel in the iron ore sintering, as well as its influence on the performance and properties of the resulting sinter. To completely replace conventional coke breeze, biocoke is produced using 5 wt.% biomass wood pellets at different carbonization temperatures of 950 or 1100°C. Further, the influence of biocoke on the sintering process and the sinter quality is studied at a high proportion of biomass pellets of 10, 15, 30, 45 wt.% and a carbonization temperature of 950°C. Methods. Carbonization is performed in shaft-type electric furnaces to produce laboratory coke or biocoke. Afterward, the sintering of iron ores is conducted on a sinter plant. To assess the sintering process and the quality of the resulting sinter, the filtration rate is determined on a laboratory sinter plant using a vane anemometer designed to measure the directional flow average velocity under industrial conditions. The sinter reducibility is studied using a vertical heating furnace to assess the effect of coke and biocoke on the sinter’s physical-chemical properties. Findings. It has been determined that biocoke, carbonized at a temperature of 950°C, has good prospects and potential for a shift to a sustainable process of iron ore sintering. Originality. It has been proven that biocoke with a biomass pellet ratio of up to 15 wt.%, obtained at a temperature of 950°C, does not affect the parameters characterizing the sintering process. The sinter strength indicators correspond to the use of 100 wt.% conventional coke breeze. Biocoke used with a high proportion of biomass pellets of 30 and 45 wt.% causes a deterioration in the sinter quality. Practical implications. The results of using biocoke with the addition of 5-15 wt.% biomass pellets and at a temperature of 950°C are within the standard deviation, which makes it possible to use biocoke with 15 wt.% biomass pellets instead of industrial coke breeze.