Asmaa Ibrahim Afifi Mohammed

Dr. Asmaa Ibrahim Afifi Mohammed

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2020 in IEEE Access
Verified
Journal Article
Open access
AMAsmaa Ibrahim Afifi Mohammed
Asmaa Ibrahim Afifi Mohammed
AAAdel B. Abdel-Rahman
Adel B. Abdel-Rahman
AEAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
AAAhmed Allam
Ahmed Allam
SASabah M. Ahmed
Sabah M. Ahmed
In this study a quintuple band rectangular dielectric resonator antenna (RDRA) with a small frequency ratio and small size of 30 mm $\times30$ mm $\times9.813$ mm is introduced. The proposed RDRA covers the frequency bands of WLAN (2.4/5.2 GHz), WiMAX (3.5 GHz) and 5G (4.1/4.8 GHz) exploiting $TE^{y}_{10} $ , $TE^{x}_{211} $ , $TE^{y}_{1\delta 1} $ , $TE^{y}_{111} $ , and $TE^{y}_{2\delta 1} $ modes, respectively. A rectangular slot aperture is optimized to serve as a resonator with resonance mode $TE^{y}_{10} $ as well as to couple the electric field from microstrip line to the DRA to excite $TE^{x}_{211} $ mode. Furthermore, a new feeding approach employing three vertical metallic strip pairs (VMSPs) is proposed to excite further $TE^{y}_{1\delta 1} $ , $TE^{y}_{111} $ , and $TE^{y}_{2\delta 1} $ modes in the RDRA. The VMSPs are configured on both sides of the dielectric resonator (DR) along the $y$ – direction to act as vertical electric current sources. The lengths, width, and positions of the VMSPs are carefully determined in order to attain the desired modes. The four RDRA modes have broadside patterns while the slot resonator mode has a pattern like a dipole. Good agreement between both measured and simulated results of the reflection coefficient, radiation pattern, and the gain is achieved.

25 December 2021 in Sensors
Verified
Journal Article
Open access
PDF file
SEShaza El-Nady
Shaza El-Nady
RERania R. Elsharkawy
Rania R. Elsharkawy
AMAsmaa Ibrahim Afifi Mohammed
Asmaa Ibrahim Afifi Mohammed
Anwer S. Abd El-HameedAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
This paper exhibits a high-gain, low-profile dipole antenna array (DAA) for 5G applications. The dipole element has a semi-triangular shape to realize a simple input impedance regime. To reduce the overall antenna size, a substrate integrated cavity (SIC) is adopted as a power splitter feeding network. The transition between the SIC and the antenna element is achieved by a grounded coplanar waveguide (GCPW) to increase the degree of freedom of impedance matching. Epsilon-near-zero (ENZ) metamaterial technique is exploited for gain enhancement. The ENZ metamaterial unit cells of meander shape are placed in front of each dipole perpendicularly to guide the radiated power into the broadside direction. The prospective antenna has an overall size of 2.58 λg3 and operates from 28.5 GHz up to 30.5 GHz. The gain is improved by 5 dB compared to that of the antenna without ENZ unit cells, reaching 11 dBi at the center frequency of 29.5 GHz. Measured and simulated results show a reasonable agreement.