Shaza El-Nady

Dr. Shaza El-Nady

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2021 in IEEE Access
Verified
Journal Article
Open access
RERania R. Elsharkawy
Rania R. Elsharkawy
Anwer S. Abd El-HameedAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
SEShaza El-Nady
Shaza El-Nady
A quad-port multiple-input multiple-output (MIMO) filtenna with compact dimensions of $50\times50$ mm 2 is arranged. In this MIMO filtenna, each element is placed orthogonal to its adjacent one to enhance the isolation. The MIMO element is configured based on the novel COVID-19 virus shape with a co-planar waveguide (CPW) feeding structure and dimensions of $17\times22$ mm 2 . The element bandwidth ranges from 3.3 GHz to more than 60 GHz. Three frequency notches are designed at 3.5 GHz for WiMAX, 5.5 GHz for WLAN, and 8.5 GHz for X-band applications. A bandpass filter (BPF) with high out-of-band rejection is used as a decoupling structure (DS) to improve the isolation to more than 30 dB across most of the bandwidth. The BPF is designed based on LC lumped elements, and then implemented using planar strip lines. The proposed MIMO filtenna system provides an impedance bandwidth of 2.4–18 GHz, a peak gain of 5 dBi, and an envelope correlation coefficient (ECC) less than 0.00021. In turn, channel capacity loss does not exceed 0.2. The MIMO filtenna is fabricated and measured showing a good agreement between the measured and simulated results.

7 September 2023 in AEU - International Journal of Electronics and Communications
Verified
Journal Article
Closed access
SEShaza El-Nady
Shaza El-Nady
AEAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
EEEman Eldesouki
Eman Eldesouki
SSShimaa A. M. Soliman
Shimaa A. M. Soliman

16 February 2022 in IEEE Access
Verified
Journal Article
Open access
SEShaza El-Nady
Shaza El-Nady
AAAhmed Attiya
Ahmed Attiya
This paper presents a wideband eight-port multiple-input-multiple-output (MIMO) circularly polarized antenna system for mm-wave applications. The proposed antenna element is an L-shape microstrip line with a series fishtail stubs on one side. The spacing between these stubs is adjusted to be a guided wavelength at the center frequency. These fishtail stubs are used to cancel the anti-phase magnetic currents to enhance the radiated fields from the microstrip line. A 90° phase difference between the fields of the two arms of the L-shape is obtained by shifting the feeding point from the center of the corner by one eighth guided wavelength. This 90° phase difference introduces the required circular polarization. The proposed antenna covers the frequency range from 27.5 up to 31 GHz, which is suitable for mm-wave N261 5G-band which cover the range from 27.5 to 28.35 GHz. These antenna elements are arranged on the four corners of a rectangular substrate to configure the proposed MIMO antenna system. Different parameters of this MIMO antenna are investigated by using numerical simulation and verified by experimental results.

25 May 2023 in IEEE Access
Verified
Journal Article
Open access
SSShimaa A. M. Soliman
Shimaa A. M. Soliman
EEEman Eldesouki
Eman Eldesouki
SEShaza El-Nady
Shaza El-Nady
AEAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
The reduction of radar cross-section (RCS) becomes an essential requirement for many military and civilian applications. One of the ways to achieve this is by using artificial magnetic conductors (AMCs) as electromagnetic surfaces. In this research, the reduction of the RCS is realized by adding a novel single layer AMC based metasurface unit cells that depend on polarization to cancel backscattering for Ka applications. The proposed AMC unit cell consists of a rectangular patch with open ended microstrip stubs. This unit cell exhibits a wide band phase difference about 180°±38° between the two reflected orthogonal field components in the frequency range from 27 to 56.5 GHz (about 71% relative bandwidth). Four AMC block arrays perpendicular to each other are combined in a chessboard configuration. To validate the capability of achieving a good RCS reduction, a substrate integrated wave guide (SIW) cavity-backed slot antenna is placed in the center of the AMC sheet. Simulation results show that the proposed AMC unit cell significantly reduces backscattered energy from 29.5 GHz to 50 GHz and from 28.5 GHz to 48.5 GHz in both y – and x –polarization, respectively, and covers a –10 dB backscattering reduction at antenna working band (32.2–34 GHz). The antenna’s bistatic performance at different frequencies is also presented. The fabricated design’s measurements and simulations match well, verifying and validating the proposed design.

25 December 2021 in Sensors
Verified
Journal Article
Open access
PDF file
SEShaza El-Nady
Shaza El-Nady
RERania R. Elsharkawy
Rania R. Elsharkawy
AMAsmaa Ibrahim Afifi Mohammed
Asmaa Ibrahim Afifi Mohammed
Anwer S. Abd El-HameedAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
This paper exhibits a high-gain, low-profile dipole antenna array (DAA) for 5G applications. The dipole element has a semi-triangular shape to realize a simple input impedance regime. To reduce the overall antenna size, a substrate integrated cavity (SIC) is adopted as a power splitter feeding network. The transition between the SIC and the antenna element is achieved by a grounded coplanar waveguide (GCPW) to increase the degree of freedom of impedance matching. Epsilon-near-zero (ENZ) metamaterial technique is exploited for gain enhancement. The ENZ metamaterial unit cells of meander shape are placed in front of each dipole perpendicularly to guide the radiated power into the broadside direction. The prospective antenna has an overall size of 2.58 λg3 and operates from 28.5 GHz up to 30.5 GHz. The gain is improved by 5 dB compared to that of the antenna without ENZ unit cells, reaching 11 dBi at the center frequency of 29.5 GHz. Measured and simulated results show a reasonable agreement.

3 September 2024 in Journal of Electrical Systems and Information Technology
Verified
Journal Article
Open access
PDF file
SEShaza El-Nady
Shaza El-Nady
AEAnwer S. Abd El-Hameed
Anwer S. Abd El-Hameed
EOEman G. Ouf
Eman G. Ouf
This article introduces a novel microstrip slot antenna array (SAA) configuration for radar applications. The proposed antenna is specifically designed for operation in the K-band, spanning from 23 to 24.3 GHz. The antenna structure comprises two substrates: the feed network and ground plane are on the bottom substrate, and the radiating slots are on the top layer of the first substrate. The incorporation of a unique grid feed configuration, featuring 50 Ohm center excitation for the first time, improves the feed mechanism of the microstrip SAA. This innovation contributes to achieving a compact size and high gain. To enhance the side lobe level, the design incorporates a substrate-integrated waveguide-backed cavity, which significantly reduces surface waves. The SAA consists of 25 radiating elements with a gain of 14 dBi. In the elevation and azimuth planes, the half-power beamwidths are measured at 12.1° and 69.1°, respectively. The proposed antenna array’s measured impedance bandwidth ranges from 23.15 to 24.75 GHz, guaranteeing a reflection coefficient (S11) of less than − 10 dB. The suggested antenna's applicability for automotive multi-input multi-output radar has been validated.