Asif Ur Rehman

Mr. Asif Ur Rehman

R&D, 3D Tact Ltd, London, City of London, UK
orcid
Founder & CEO at 3D Tact | Helping Businesses Turn Ideas int...

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
MSMussadiq Shah
Mussadiq Shah
AUAbid Ullah
Abid Ullah
KAKashif Azher
Kashif Azher
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
WJWang Juan
Wang Juan
Metin Uymaz SalamciMetin Uymaz Salamci
Metin Uymaz Salamci
The synthesis and manufacturing of polymer nanocomposites have garnered interest in recent research and development because of their superiority compared to traditionally employed industrial materials.

4 January 2022 in Metals
Verified
Journal Article
Open access
PDF file
Muhammad Arif MahmoodMuhammad Arif Mahmood
Muhammad Arif Mahmood
CDChioibasu Diana
Chioibasu Diana
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
SMSabin Mihai
Sabin Mihai
Andrei PopescuAndrei Popescu
Andrei Popescu
Additive manufacturing (AM) processes can produce three-dimensional (3D) near-net-shape parts based on computer-aided design (CAD) models. Compared to traditional manufacturing processes, AM processes can generate parts with intricate geometries, operational flexibility and reduced manufacturing time, thus saving time and money. On the other hand, AM processes face complex issues, including poor surface finish, unwanted microstructure phases, defects, wear tracks, reduced corrosion resistance and reduced fatigue life. These problems prevent AM parts from real-time operational applications. Post-processing techniques, including laser shock peening, laser polishing, conventional machining methods and thermal processes, are usually applied to resolve these issues. These processes have proved their capability to enhance the surface characteristics and physical and mechanical properties. In this study, various post-processing techniques and their implementations have been compiled. The effect of post-processing techniques on additively manufactured parts has been discussed. It was found that laser shock peening (LSP) can cause severe strain rate generation, especially in thinner components. LSP can control the surface regularities and local grain refinement, thus elevating the hardness value. Laser polishing (LP) can reduce surface roughness up to 95% and increase hardness, collectively, compared to the as-built parts. Conventional machining processes enhance surface quality; however, their influence on hardness has not been proved yet. Thermal post-processing techniques are applied to eliminate porosity up to 99.99%, increase corrosion resistance, and finally, the mechanical properties’ elevation. For future perspectives, to prescribe a particular post-processing technique for specific defects, standardization is necessary. This study provides a detailed overview of the post-processing techniques applied to enhance the mechanical and physical properties of AM-ed parts. A particular method can be chosen based on one’s requirements.

5 July 2021 in Metals
Verified
Journal Article
Open access
PDF file
Peyman AnsariPeyman Ansari
Peyman Ansari
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
FPFatih Pitir
Fatih Pitir
SVSalih Veziroglu
Salih Veziroglu
Yogendra MishraYogendra Mishra
Yogendra Mishra
Metin Uymaz SalamciMetin Uymaz Salamci
Metin Uymaz Salamci
The parameter sets used during the selective laser melting (SLM) process directly affect the final product through the resulting melt-pool temperature. Achieving the optimum set of parameters is usually done experimentally, which is a costly and time-consuming process. Additionally, controlling the deviation of the melt-pool temperature from the specified value during the process ensures that the final product has a homogeneous microstructure. This study proposes a multiphysics numerical model that explores the factors affecting the production of parts in the SLM process and the mathematical relationships between them, using stainless steel 316L powder. The effect of laser power and laser spot diameter on the temperature of the melt-pool at different scanning velocities were studied. Thus, mathematical expressions were obtained to relate process parameters to melt-pool temperature. The resulting mathematical relationships are the basic elements to design a controller to instantly control the melt-pool temperature during the process. In the study, test samples were produced using simulated parameters to validate the simulation approach. Samples produced using simulated parameter sets resulting in temperatures of 2000 K and above had acceptable microstructures. Evaporation defects caused by extreme temperatures, unmelted powder defects due to insufficient temperature, and homogenous microstructures for suitable parameter sets predicted by the simulations were obtained in the experimental results, and the model was validated.

7 February 2023 in Crystals
Verified
Journal Article
Open access
PDF file
MSMussadiq Shah
Mussadiq Shah
AUAbid Ullah
Abid Ullah
KAKashif Azher
Kashif Azher
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
NANizami Aktürk
Nizami Aktürk
Metin Uymaz SalamciMetin Uymaz Salamci
Metin Uymaz Salamci
The synergistic integration of nanocomposites and 3D printing has opened a gateway to the future and is soon expected to surpass its rivalry with traditional manufacturing techniques. However, there is always a challenge associated with preparing a nanocomposite resin for polymerization-based 3D printing, which is the agglomeration of nanoparticles. Due to the high surface-area-to-volume ratio, the nanoparticles form clusters in the composite matrix, which affects the final properties. This paper aims to analyze the effects of graphene oxide (GO) dispersion on the mechanical and thermal properties of 3D-printed nanocomposites. In particular, a well-dispersed sonication dispersion route is employed for analyzing high and poor GO dispersions and their effects on different properties. After different microscopic analyses and testing, the optimum sonication condition was 30 min at an amplitude of 70%. In terms of mechanical properties, both tensile and compression strength first increased and then decreased gradually with different dispersions as well as varying GO concentrations. Furthermore, there was less or no effect on thermal stability. GO of 0.05 wt.% had the highest compression and tensile strength, while beyond 0.05 to 0.5 wt.%, both strengths reduced slowly. These 3D-printed nanocomposites have found their application in automotive, sports, and biomedical fields.

24 September 2020 in Rapid Prototyping Journal
Verified
Journal Article
Closed access
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
VSVincenzo M. Sglavo
Vincenzo M. Sglavo
Purpose: Three-dimensional (3D) printing technology allows geometric complexity and customization with a significant reduction in the structural environmental impact. Nevertheless, it poses a serious threat to the environment when organic binders are used. Binder jet printing of alkali-activated geopolymer precursor can represent a successful and environmental-friendly alternative. Design/methodology/approach: The present work reports about the successful 3D printing of metakaolin-based alkali-activated concrete, with dimensional integrity and valuable mechanical behavior. Findings: The geometric behavior was studied as a function of alkali activator flow rate, and the minimum geometric deviation with complete saturation was recorded at 103 mg/s. The printed specimen is characterized by a modulus of rupture as high as 4.4 MPa at 135 mg/s. Practical implications: The 3D printed geopolymer-based concrete can be potentially used in a wide range of structural applications from construction to thermal insulation elements. Originality/value: The analysis of the 3D geopolymer-based concrete printing system and material conducted in this paper is original.

21 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Asif Ur RehmanAsif Ur Rehman
Asif Ur Rehman
FPFatih Pitir
Fatih Pitir
Metin Uymaz SalamciMetin Uymaz Salamci
Metin Uymaz Salamci
Laser powder bed fusion (LPBF) has a wide range of uses in high-tech industries, including the aerospace and biomedical fields. For LPBF, the flow of molten metal is crucial; until now, however, the flow in the melt pool has not been described thoroughly in 3D. Here, we provide full-field mapping and flow measurement of melt pool dynamics in laser powder bed fusion, through a high-fidelity numerical model using the finite volume method. The influence of Marangoni flow, evaporation, as well as recoil pressure have been included in the model. Single-track experiments were conducted for validation. The temperature profiles at different power and speed parameters were simulated, and results were compared with experimental temperature recordings. The flow dynamics in a single track were exposed. The numerical and experimental findings revealed that even in the same melting track, the melt pool’s height and width can vary due to the strong Marangoni force. The model showed that the variation in density and volume for the same melting track was one of the critical reasons for defects. The acquired findings shed important light on laser additive manufacturing processes and pave the way for the development of robust, computational models with a high degree of reliability.