Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) is a conductive water-processable polymer with many important applications in organic electronics. The electrical conductivity of PEDOT:PSS layers is very diverse and can be changed by changing the processing and post-deposition conditions, e.g., by using different solvent additives, doping or modifying the physical conditions of the layer deposition. Despite many years of intensive research on the relationship between the microstructure and properties of these layers, there are still gaps in our knowledge, especially with respect to the detailed understanding of the charge carrier transport mechanism in organic semiconductor thin films. In this work, we investigate the effect of acid doping of PEDOT:PSS thin films on the intra-chain and inter-chain conductivity by developing a model that treats PEDOT:PSS as a nanocomposite material. This model is based on the effective medium theory and uses the percolation theory equation for the electrical conductivity of a mixture of two materials. Here its implementation assumes that the role of the highly conductive material is attributed to the intra-chain conductivity of PEDOT and its quantitative contribution is determined based on the optical Drude–Lorentz model. While the weaker inter-chain conductivity is assumed to originate from the weakly conductive material and is determined based on electrical measurements using the van der Pauw method and coherent nanostructure-dependent analysis. Our studies show that doping with methanesulfonic acid significantly affects both types of conductivity. The intra-chain conductivity of PEDOT increases from 260 to almost 400 Scm−1. Meanwhile, the inter-chain conductivity increases by almost three orders of magnitude, reaching a critical state, i.e., exceeding the percolation threshold. The observed changes in electrical conductivity due to acid doping are attributed to the flattening of the PEDOT/PSS gel nanoparticles. In the model developed here, this flattening is accounted for by the inclusion shape factor.
One of the key parameters characterizing the microstructure of a layer is its degree of order. It can be determined from optical studies or X-ray diffraction. However, both of these methods applied to the same layer may give different results because, for example, aggregates may contribute to the amorphous background in XRD studies, while in optical studies, they may already show order. Because we are usually interested in the optical and/or electrical properties of the layers, which in turn are closely related to their dielectric properties, determining the optical order of the layers is particularly important. In this work, the microstructure, optical properties and electrical conductivity of poly(3-hexyl)thiophene layers were investigated, and a model describing the electrical conductivity of these layers was proposed. The model is based on the generalized theory of the effective medium and uses the equation from the percolation theory of electrical conductivity for the effective medium of a mixture of two materials. The results indicate a key role of the aggregate size and limited conductivity of charge carriers, mainly due to structural imperfections that manifest themselves as an increase in the number of localized states visible in the subgap absorption near the optical absorption edge. The critical value of the order parameter and the corresponding values of the Urbach energy, excitonic linewidth and band gap energy are determined.
Two-dimensional layered transition-metal dichalcogenides (2D-TMDs) have garnered significant attention due to their layer number-dependent electronic properties, making them promising candidates for atomically thin electronics and optoelectronics. However, current research has primarily focused on exfoliated TMD materials, which have limitations in size, layer number control, and yield. Therefore, a crucial challenge remains in producing large-sized TMD single crystals with precise control over the layer number. A comprehensive understanding and precise control of the growth conditions are imperative to address this challenge. This study systematically investigated key growth conditions, including temperature, precursor flow, growth duration, material quantity, gas flow, and slide position. By optimizing these parameters, we successfully synthesized TMD materials with an impressive size of 850 µm. Notably, we achieved the preparation of monolayer WS2 single crystals on a large scale within a remarkably short duration of 10 minutes, exhibiting a lateral growth rate of up to 1.4 μm/s, which is comparable to the best-exfoliated monolayers. The findings from our study provide a robust pathway for the rapid growth of high-quality TMD single crystals, facilitating further advancements in this field.
Two-dimensional layered transition-metal dichalcogenides (2D-TMDs) have garnered significant attention due to their layer number-dependent electronic properties, making them promising candidates for atomically thin electronics and optoelectronics. However, current research has primarily focused on exfoliated TMD materials, which have limitations in size, layer number control, and yield. Therefore, a crucial challenge remains in producing large-sized TMD single crystals with precise control over the layer number. A comprehensive understanding and precise control of the growth conditions are imperative to address this challenge. This study systematically investigated key growth conditions, including temperature, precursor flow, growth duration, material quantity, gas flow, and slide position. By optimizing these parameters, we successfully synthesized TMD materials with an impressive size of 850 µm. Notably, we achieved the preparation of monolayer WS2 single crystals on a large scale within a remarkably short duration of 10 minutes, exhibiting a lateral growth rate of up to 1.4 μm/s, which is comparable to the best-exfoliated monolayers. The findings from our study provide a robust pathway for the rapid growth of high-quality TMD single crystals, facilitating further advancements in this field.