Aiming at the problem of track tracking during UAV flight, this paper designs the controller based on the model predictive control theory of full state feedback. First, the disturbance error model is established with reference to the body model and linearized and discretized it. Secondly, the linear quadratic programming method is used to solve the optimal control sequence. The simulation results show that the controller designed in this paper can accurately track the UAV's nominal trajectory, and at the same time can effectively suppress the external interference during the flight.
Automated target species selection dynamic adaptive chemistry (automated DAC) based on the directed relation graph with error propagation is a dynamic mechanism reduction method that can alleviate the huge computational overhead of high-precision large eddy simulations. However, the accuracy of this algorithm is often assessed based on the temperature and ignition delay time, which are a posteriori results and do not reflect the physicochemical nature. Because of this, we proposed a new criterion based on the tangential stretching rate (TSR) value to study the automated DAC method from the perspective of chemical reactions, which can characterize the most energetic reaction mode. First, we tested the new criterion by applying it to the analyses of the simulations adopting the detailed mechanism and automated DAC. The results verified the performance of the new criterion and showed that a new TSR value oscillation error phenomenon was discovered by it. This error is caused by the inappropriate cut-off of the important species and chemical reactions in the DAC-generate skeleton mechanisms. Second, we studied the measures to eliminate this newly emerged error. We found that reducing the search threshold, increasing the number of target species of the automated DAC method, and modifying the automated DAC to the time-correlated automated DAC by adding a time correlation term can alleviate this TSR value oscillation error. In addition, constant pressure autoignition simulations of methane/air were implemented to support this study. The TSR-computational singular perturbation participation indices were also introduced for assistance.
To address the high computational cost of full-domain transient simulations of heat pipe-assisted phase change energy storage systems for vehicle engine exhaust waste heat recovery, this paper proposes a space-time dual decoupling method. Dimensional analysis reveals significant time-scale disparities between the fast and slow sub-domains of the system, on the basis of which the full-domain transient model is sequentially decoupled into a steady-state calibration of the fast sub-domain and a transient evolution of the slow sub-domain. Multiple steady-state calculations are first performed to calibrate an explicit mapping between the recovered heat power and the wall temperature; this mapping is then imposed as a time-varying heat-flux boundary condition to drive the independent transient evolution of the heat storage process. The results show that the fast sub-domain reaches a quasi-steady state within 20 s, with the energy balance deviation decreasing from 38.5% to below 5%. The predicted heat pipe wall temperatures and recovered heat powers agree closely with those of the traditional full-domain transient method, with maximum relative errors of 1.2% and 5.54%, respectively, while the total computational time is reduced from 4364.54 h to 147.99 h, corresponding to an approximately 29.5-fold improvement in efficiency.
Laminar counterflow multi-branch flames provide a canonical configuration for investigating interactions between oxidizer-rich and fuel-rich streams in liquid-oxygen/methane combustion systems. This study numerically investigates their flame structure and stability under transcritical conditions, with stability characterized by the extinction strain rate. Ideal-fluid (IF), partial real-fluid (PRF), and real-fluid (RF) models are compared to distinguish the effects of real-fluid thermodynamics and high-pressure transport corrections. The multi-branch flame comprises two premixed branches coupled with a central diffusion branch. Heat release from the premixed branches creates high-temperature plateaus that preheat the stagnation-region mixture and sustain the diffusion branch. Although the three models predict similar flame topologies, the IF model gives an extinction strain rate of , whereas both PRF and RF predict . Thus, the ideal-fluid treatment slightly overpredicts the extinction limit under the present reference condition, while high-pressure transport corrections influence the ignition location, peak temperature, and thermal diffusivity. Increasing pressure from 10 MPa to 40 MPa raises the extinction strain rate from to by strengthening heat release and reducing thermal diffusion from the high-temperature region. Oxidizer preheating markedly enhances flame stability, whereas fuel preheating has a weak effect. These findings establish the connection between real-fluid thermodynamics, branch interaction, and extinction stability, providing a physical basis for model selection, operating-condition optimization, and stability-margin assessment in transcritical liquid-oxygen/methane combustion systems.