Automated target species selection dynamic adaptive chemistry (automated DAC) based on the directed relation graph with error propagation is a dynamic mechanism reduction method that can alleviate the huge computational overhead of high-precision large eddy simulations. However, the accuracy of this algorithm is often assessed based on the temperature and ignition delay time, which are a posteriori results and do not reflect the physicochemical nature. Because of this, we proposed a new criterion based on the tangential stretching rate (TSR) value to study the automated DAC method from the perspective of chemical reactions, which can characterize the most energetic reaction mode. First, we tested the new criterion by applying it to the analyses of the simulations adopting the detailed mechanism and automated DAC. The results verified the performance of the new criterion and showed that a new TSR value oscillation error phenomenon was discovered by it. This error is caused by the inappropriate cut-off of the important species and chemical reactions in the DAC-generate skeleton mechanisms. Second, we studied the measures to eliminate this newly emerged error. We found that reducing the search threshold, increasing the number of target species of the automated DAC method, and modifying the automated DAC to the time-correlated automated DAC by adding a time correlation term can alleviate this TSR value oscillation error. In addition, constant pressure autoignition simulations of methane/air were implemented to support this study. The TSR-computational singular perturbation participation indices were also introduced for assistance.
Efficient acquisition of combustion flow-field data is essential for engine performance analysis and design optimization. However, conventional numerical simulations and experiments remain costly and time-consuming. Reduced-order models (ROMs) enable low-cost and rapid prediction of combustion flow fields at future time instants or under unknown operating conditions, thereby providing an effective means of overcoming the bottlenecks in efficiency and cost associated with conventional approaches. These methods are generally classified as intrusive or non-intrusive. This review first clarifies the key physical characteristics that distinguish combustion flow fields from general flows and then outlines the core ideas of the two categories. It subsequently examines the algorithmic principles and developments of the two key steps in non-intrusive ROM approaches, namely feature mode extraction and modal coefficient prediction, and discusses how these physical characteristics affect each step. Typical applications in combustion flow-field prediction are then reviewed from two perspectives, namely temporal evolution under a single operating condition and parametric response under multiple operating conditions, and approaches to improving the engineering credibility of the predictions are summarized. Finally, the main challenges are discussed in terms of the completeness of feature mode extraction, the temporal extrapolation capability of modal coefficients, the parameter generalization capability, and the enhancement of engineering credibility, along with prospective research directions.
Laminar counterflow multi-branch flames provide a canonical configuration for investigating interactions between oxidizer-rich and fuel-rich streams in liquid-oxygen/methane combustion systems. This study numerically investigates their flame structure and stability under transcritical conditions, with stability characterized by the extinction strain rate. Ideal-fluid (IF), partial real-fluid (PRF), and real-fluid (RF) models are compared to distinguish the effects of real-fluid thermodynamics and high-pressure transport corrections. The multi-branch flame comprises two premixed branches coupled with a central diffusion branch. Heat release from the premixed branches creates high-temperature plateaus that preheat the stagnation-region mixture and sustain the diffusion branch. Although the three models predict similar flame topologies, the IF model gives an extinction strain rate of , whereas both PRF and RF predict . Thus, the ideal-fluid treatment slightly overpredicts the extinction limit under the present reference condition, while high-pressure transport corrections influence the ignition location, peak temperature, and thermal diffusivity. Increasing pressure from 10 MPa to 40 MPa raises the extinction strain rate from to by strengthening heat release and reducing thermal diffusion from the high-temperature region. Oxidizer preheating markedly enhances flame stability, whereas fuel preheating has a weak effect. These findings establish the connection between real-fluid thermodynamics, branch interaction, and extinction stability, providing a physical basis for model selection, operating-condition optimization, and stability-margin assessment in transcritical liquid-oxygen/methane combustion systems.