Soil pollution with hydrocarbons is a consequence of activities associated with the petroleum industry and related sectors. The effects of petroleum pollution are devastating, making the remediation of contaminated sites imperative. Consequently, soil decontamination represents a significant and costly challenge for the petroleum industry. The article proposes a dual-recovery bioremediation solution that is both efficient and cost-effective, exploring the potential use of dehydrated sewage sludge from municipal wastewater treatment plants to treat petroleum-contaminated soils. Over the three-month bioremediation experiment, changes in the density of indigenous bacteria in petroleum-contaminated soil samples, treated or untreated with sludge, were monitored along with the reduction in petroleum hydrocarbon concentrations. In parallel, the evolution of other contaminants, such as heavy metals, was monitored during the bioremediation experiment. Geotechnical tests were also conducted to evaluate the feasibility of returning the treated soil to its original location after the bioremediation experiment. Our results demonstrate that the proposed method effectively addresses both the remediation of petroleum-contaminated soils (hazardous waste) and the reuse of sewage sludge from municipal wastewater treatment plants.
The use of sewage sludge for the bioremediation of hydrocarbon-contaminated soils remains insufficiently documented, particularly regarding microbial dynamics and material behavior during treatment. Although petroleum-hydrocarbon contamination severely disrupts soil functions, sewage sludge—through its high organic matter content, active bacterial communities, and fine mineral fraction—offers potential for the sustainable remediation of such soils. Three soil–sludge mixtures (P1:N1, P2:N1, P1:N2) were monitored to assess hydrocarbon degradation, bacterial community dynamics, and material behavior. Hydrocarbon-degrading and hydrocarbon-tolerant bacteria remained active, while sludge-derived Enterobacteriaceae declined below detection limits. Enrichment cultures of the sludge yielded three hydrocarbon-degrading strains (Providencia alcalifaciens IBBN1, Klebsiella pneumoniae IBBN2, Acinetobacter tandoii IBBN3), highlighting the metabolic potential of the active microbial communities. A moderate increase in surfactant concentrations reflected both residual anionic surfactants and biosurfactant production by these consortia, facilitating hydrocarbon mobilization. Total petroleum hydrocarbons (TPH) decreased by 45–60% (IR), and GC-FID analysis showed preferential degradation of C10–C40 fractions. Heavy-metal concentrations remained stable, indicating no geochemical changes or inhibitory effects on bacterial activity. Overall, the results confirm the potential of sewage sludge as a sustainable amendment that accelerates hydrocarbon biodegradation and supports integrated soil-restoration strategies.
16 September 2024 in Annals of the ”Dunarea de Jos” University of Galati. Fascicle II, Mathematics, Physics, Theoretical Mechanics
Soil is a non-renewable natural resource, extremely valuable for maintaining life on Earth. Large areas of soil are often polluted with petroleum products as a result of various human activities. In this case, it is necessary to remediate the contaminated soils from the oil industry and return them to the natural and economic circuit. In addition, large quantities of sewage sludge are generated daily by sewage treatment plants. The purpose of this study was to use the soil subjected to a bioremediation experiment with sewage sludge as support for the development of a new vegetal layer to restore the natural balance. The grass was sown in the land, which had previously been treated with sewage to monitor its development. Through microbiological analysis, we observed that soil and sewage sludge mixtures have a high content of heterotrophic bacteria and filamentous fungi that could play an important role in seed germination. IR (infrared spectroscopy) analysis revealed a decrease in hydrocarbon concentrations in the petroleum- contaminated soil treated with sewage sludge. By using the combined methods SEM-EDX (scanning electron microscopy – energy dispersive X-ray), we also analyzed the soil microstructure and the distribution of chemical elements to highlight the plants' evolution. The present study considers soil regeneration in areas contaminated with petroleum products and opens new perspectives for the use of sewage sludge in the ecological reconstruction of petroleum-contaminated sites.
Soil pollution with hydrocarbons is a consequence of the activity of the oil industry and other related fields of activity. The effects of oil pollution are devastating; therefore, the remediation of polluted sites is mandatory. For this reason, soil decontamination is a major and expensive problem for the oil industry. The article proposes a dual-recovery bioremediation solution that is efficient and inexpensive. The possibility of using sludge resulting from municipal wastewater treatment plants for the treatment of soils contaminated with petroleum was studied. During the bioremediation experiment, the variation over time of the density of indigenous bacteria present in the mixtures of contaminated soil and sewage sludge, in various proportions was followed, simultaneously with the decrease in the concentrations of petroleum hydrocarbons. In parallel, the evolution of other pollutants from the two environments was analyzed, such as heavy metals (ICP - MS), etc. The study also includes geotechnical tests for returning the soil after bioremediation to the original locations. The obtained results lead to the conclusion that the proposed method can simultaneously solve both the problem of remediation of soils polluted with petroleum products (hazardous waste) and the recovery of sludge from municipal wastewater treatment plants.
Petroleum hydrocarbons remain major environmental contaminants, and understanding the mechanisms governing their biodegradation is essential for designing effective remediation plans. The strategy in this article is slightly different from other cases in the literature. Such literature models require, for their elaboration, a significant number of experiments; the number of experimental determinations is at least proportional to the square of the number of constants introduced in the mathematical expressions. For this reason, the strategy followed in this article is different—starting from a set of experiments carried out and presented in a coherent and published manner, a simple methodology for building specific and minimal models, which will allow solving specific problems, was effectively developed. This study develops a nonlinear mathematical structure, expressed as a system of coupled differential equations, that simultaneously describes the degradation of petroleum hydrocarbons and the dynamics of hydrocarbon-degrading bacteria and fungi in soil–sludge mixtures. The model was calibrated using experimental data obtained from biopiles prepared with different volumetric ratios of contaminated soil and sewage sludge. Approximate analytical solutions were derived and the distributed constants were evaluated. For a consistent discussion, the analytical solutions were assessed against numerical desk simulations performed with a classical fourth-order Runge–Kutta method, which accurately reproduced the nonlinear behavior of the specific system. This numerical approach was chosen in order to overcome the proper difficulties encountered in this strategy implementation. The results show that the soil–sludge ratio strongly influences biodegradation efficiency, while kinetic parameters determine whether microbial communities evolve toward a stationary regime or accelerated contaminant removal. The combined analytical–numerical framework provides a robust predictive tool for optimizing mixture composition and improving the design of bioremediation treatments for petroleum-contaminated soils.