Chao Liu

Dr. Chao Liu

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2019 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LCLiu Chuang
Liu Chuang
CLChao Liu
Chao Liu
GCGuowei Cai
Guowei Cai
HYHong Ying
Hong Ying
ZZZhenbin Zhang
Zhenbin Zhang
XSXiaomin Song
Xiaomin Song
This paper introduces the high-frequency link (HFL) concept into the modular multilevel converter (MMC) topology, which can totally reduce the individual DC-link capacitors at the high-voltage (HV) side. The proposed converter, called isolated modular multilevel converter (I-M2C), has basic triple ports of medium-voltage AC (MVAC), medium-voltage DC (MVDC), and low-voltage DC (LVDC). Thus, it is especially suitable for hybrid DC and AC applications in power generation and transmission, such as Solid-State Transformer (SST), etc. The fundamental principle and applied Phase-Shift Pulse Width Modulation (PSPWM) control scheme are presented in detail. And the design of the clamping circuit and analysis of duty loss are carried out. The experimental results are given to illustrate the efficient operation characteristics.

17 August 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CLChao Liu
Chao Liu
ZZZhe Zhang
Zhe Zhang
Michael A.E. AndersenMichael A.E. Andersen
Michael A.E. Andersen
A step-up/and down converter based on partial power processing is proposed in this article. With the same state equations, the step-up and step-down modes have the same small-signal modeling. Therefore, a unified control strategy can be designed for both operating modes, achieving the autoswitching between two operating modes without requiring any additional control. The effect of the transformer's turn ratio on the current and voltage stresses is then analyzed. The component stresses are reduced due to the decoupling of the transformer. Moreover, the component stress factor method is implemented to evaluate the proposed step-up/down partial power converter. Compared with conventional step-up or step-down partial power converters, the proposed converter has the least component stress factor for a high-voltage electrolysis system. In order to validate the proposed topology and modulation strategy, a 400-V prototype is implemented and experimentally evaluated. Measurement results confirm the high efficiency in the overall voltage range, and the maximum efficiency exceeds 99.5%.

13 July 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZPZhongchen Pei
Zhongchen Pei
DKDehao Kong
Dehao Kong
CLChao Liu
Chao Liu
LCLiu Chuang
Liu Chuang
DGDongbo Guo
Dongbo Guo
MHMarcelo Lobo Heldwein
Marcelo Lobo Heldwein
This article proposes a novel triple-port solid-state transformer (SST) topology based on a hybrid isolated modular multilevel converter (MMC), which overcomes the limitation of voltage ratio R (pu) in the conventional MMC-based SST. By integrating a high-frequency link into the MMC structure and applying various types of isolated submodule (ISM), the proposed SST can function as a step-down rectifier, where U MVDC < U MVAC(p-p) . In this case, the power electronics converters used to connect downstream medium-voltage direct current (MVdc) link and distributed energy resources or battery storage require fewer active devices and may minimize the cost of protection equipment. In addition, the proposed SST retains the significant advantages of single-stage SSTs, such as single-stage power conversion, saving capacitor, and a simple control system. First, the topology and modulation strategy of two types of ISMs are discussed. In addition, this article provides a detailed analysis of operation principles, power flow, grid-tied control, and system reliability. Moreover, the proposed converter is compared with other SST topologies in terms of key performance indicators, such as peak efficiency, system volume, and number of active semiconductor devices. Finally, a 300-V/20-kW scaled-down prototype is developed, and the experimental results demonstrate the performance and verify the correctness of the proposed converter.

9 June 2025 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
SWShibo Wang
Shibo Wang
LKLingguo Kong
Lingguo Kong
CLChao Liu
Chao Liu
LCLiu Chuang
Liu Chuang
GCGuowei Cai
Guowei Cai
Zhe ChenZhe Chen
Zhe Chen
To address the challenges of low efficiency, poor economic performance, and limited adaptability in renewable energy–coupled alkaline water electrolysis (AWE) systems, this study proposes a power–state rolling optimization strategy (PSROS) based on a two-stage optimization framework. First, the large-scale AWE system is divided into multiple modules to reduce the variable dimension of the optimization problem. Then, a simplified module-level optimal efficiency model is developed based on the efficiency characteristics of AWE units. Subsequently, multi-objective optimization models are constructed at the module and unit levels, comprehensively considering hydrogen production volume, lifespan degradation, and utilization balancing. Finally, a finite-horizon rolling optimization mechanism is introduced to solve the two-stage optimization problem, improving the continuity and rationality of scheduling decisions at the end of each optimization horizon. Annual case study results demonstrate that, under the non-battery scenario, PSROS improves system efficiency by 9.92%, 11.12%, and 3.81%, and reduces the levelized cost of hydrogen (LCOH) by 4.14, 5.43, and 2.35 CNY/kg compared with the simple start-stop strategy (SSSS), array rotation strategy (ARS), and rolling optimization strategy (ROS), respectively. With battery integration, the system efficiency is further improved by 0.77%, and the LCOH is further reduced by 0.49 CNY/kg.

9 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DZDi Zhu
Di Zhu
ZPZhongchen Pei
Zhongchen Pei
LCLiu Chuang
Liu Chuang
JWJingyue Wang
Jingyue Wang
DKDehao Kong
Dehao Kong
MHMarcelo Lobo Heldwein
Marcelo Lobo Heldwein
This article proposes a novel solid-state transformer (SST) having a low-frequency medium-voltage ac (LF-MVac) port distinctively, which can be the key equipment for smart distribution networks based on LF-MVac interconnection. The proposed SST has four ports of power-frequency medium-voltage ac (MVac), LF-MVac, low-voltage dc (LVdc), and low-voltage ac (LVac). In addition to the two-level low-voltage dc/ac converter, the proposed SST is mainly composed of an isolated modular multilevel matrix converter (I-M3C), which can achieve single-stage three-port power conversion. First, the topology of the I-M3C is introduced. Then, a simple modulation scheme is provided to achieve single-stage three-port power conversion, and the operating principles of the I-M3C are given in detail. In addition, a control strategy based on dual- dq coordinate system is designed, which can achieve stable operation without the complex multistage coordinated control and voltage-balancing control strategies. Finally, the effectiveness of the proposed control strategy is verified through a 10-kV/2-MW full-power simulation platform, and a 100-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed I-M3C.

28 May 2024 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
PWPinhe Wang
Pinhe Wang
BSBima Nugraha Sanusi
Bima Nugraha Sanusi
CLChao Liu
Chao Liu
JHJiasheng Huang
Jiasheng Huang
TZTiberiu-Gabriel Zsurzsan
Tiberiu-Gabriel Zsurzsan
ZOZiwei Ouyang
Ziwei Ouyang
Power devices based on wide-bandgap (WBG) semiconductor materials, like Silicon Carbide (SiC) and Gallium Nitride (GaN), have notably enhanced power conversion efficiency and power density. However, the fast-switching transient and high switching frequency have brought a significant electromagnetic interference (EMI) challenge within the high frequency (HF) range. And the HF performance of EMI filters is degraded by equivalent series inductance (ESL) of X- and Y-capacitors. In this article, a new and comprehensive model using mutual coupling is proposed to eliminate parasitic inductance for EMI filter capacitors. Based on the proposed model, nine different methods of ESL cancellation are derived. Meanwhile, in contrast to previous research, this work analyzes and compares different ESL cancellation methods. And due to the superiority of symmetrical configuration, it is recommended for ESL cancellation of X-capacitors. In the case studied, the ESL of the X-capacitor has been effectively eliminated up to 40 MHz. Consequently, the differential-mode (DM) noise of the active clamping flyback (ACF) converter exhibits a significant reduction from approximately 3.5 MHz to 30 MHz.