Charernkiat Pochaiya

Dr. Charernkiat Pochaiya


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2021 in Sensors
Verified
Journal Article
Open access
PDF file
ACAjalawit Chantaveerod
Ajalawit Chantaveerod
KWKampol Woradit
Kampol Woradit
Charernkiat PochaiyaCharernkiat Pochaiya
Charernkiat Pochaiya
It is well-known that the analog FM radio channels in suburban areas are underutilized. Before reallocating the unused channels for other applications, a regulator must analyze the spectrum occupancy. Many researchers proposed the spectrum occupancy models to find vacant spectrum. However, the existing models do not analyze each channel individually. This paper proposes an approach consisting (i) a spectrum measurement strategy, (ii) an appropriate decision threshold, and (iii) criteria for channel classification, to find the unused channels. The measurement strategy monitors each channel’s activity by capturing the power levels of the passband and the guardband separately. The decision threshold is selected depending on the monitored channel’s activity. The criteria classifies the channels based on the passband’s and guardband’s duty cycles. The results show that the proposed channel classification can identify 42 unused channels. If the power levels of wholebands (existing model) were analyzed instead of passband’s and guardband’s duty cycles, only 24 unoccupied channels were found. Furthermore, we propose the interference criteria, based on relative duty cycles across channels, to classify the abnormally used channels into interference sources and interference sinks, which have 16 and 15 channels, respectively. This information helps the dynamic spectrum sharing avoid or mitigate the interferences.

12 May 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Thunyawat LimpitiThunyawat Limpiti
Thunyawat Limpiti
Charernkiat PochaiyaCharernkiat Pochaiya
Charernkiat Pochaiya
SSSiraporn Sakphrom
Siraporn Sakphrom
SCSaravud Chandhaket
Saravud Chandhaket
PLPrapan Leekul
Prapan Leekul
TTTanawut Tantisopharak
Tanawut Tantisopharak
This study aims to present a low-cost, non-destructive microwave sensor implementation to monitor the real-time moisture content of rubber wood in industrial dehydration processes. The proposed sensor is based on the free-space measurement technique with magnitudes S11 and S21 only. The novelties of this study consist of the natural frequency determination of rubber wood and the design of a sensor system using devices available on the market with reasonable cost performance. The natural frequency was determined using a simulation and was equal to 1.25 GHz. It specified the sensor system design and device selection. The designed system was initially verified by measuring the moisture content of rubber wood in the laboratory. The measured S11 and S21 voltages correlating with moisture content percentages were obtained and programmed. The system was then installed to monitor the moisture content of rubber wood in the dehydration process. The measured results deviated from those obtained from a standard method in the range of 7.67–15.38%. The error compensation was analyzed to improve the measured results that provided the deviated moisture content in the range of 3.58–5.21%. It can be inferred that the proposed sensor system has the capability to be implemented in industrial dehydration processes.

20 November 2024 in Signals
Verified
Journal Article
Open access
PDF file
ABApidet Booranawong
Apidet Booranawong
PHPuwasit Hirunkitrangsri
Puwasit Hirunkitrangsri
DBDujdow Buranapanichkit
Dujdow Buranapanichkit
Charernkiat PochaiyaCharernkiat Pochaiya
Charernkiat Pochaiya
NJNattha Jindapetch
Nattha Jindapetch
HSHiroshi Saito
Hiroshi Saito
In this paper, we demonstrate the realistic test of a 2.4 GHz multi-hop wireless network for mountainous forest and watercourse environments. A multi-hop network using IEEE 802.15.4 XBee3 micro-modules and a communication protocol among nodes were developed. A wireless node deployment solution was introduced for practical testing. The proposed system’s communication reliability was tested in two different scenarios: a mountainous forest with sloping areas and trees and a watercourse, which referred to environmental and flooding monitoring applications. Wireless network performances were evaluated through the received signal strength indicator (RSSI) level of each wireless link, a packet delivery ratio (PDR), as the successful rate of packet transmission, and the end-to-end delay (ETED) of all data packets from the transmitter to the receiver. The experimental results demonstrate the success of the multi-hop WSN deployment and communication in both scenarios, where the RSSI of each link was kept at the accepted level and the PDR achieved the highest result. Furthermore, as a real-time response, the data from the source could be sent to the sink with a small ETED.

31 July 2025 in Energies
Verified
Journal Article
Open access
PDF file
CTChidentree Treesatayapun
Chidentree Treesatayapun
Aldo Jonathan Muñoz-VázquezAldo Jonathan Muñoz-Vázquez
Aldo Jonathan Muñoz-Vázquez
SKSuratsavadee Koonlaboon Korkua
Suratsavadee Koonlaboon Korkua
BSBuntoeng Srikarun
Buntoeng Srikarun
Charernkiat PochaiyaCharernkiat Pochaiya
Charernkiat Pochaiya
This paper presents a data-driven energy management scheme for fuel cell and battery electric vehicles, formulated as a constrained optimal control problem. The proposed method employs a co-state network trained using real-time measurements to estimate the control law without requiring prior knowledge of the system model or a complete dataset across the full operating domain. In contrast to conventional reinforcement learning approaches, this method avoids the issue of high dimensionality and does not depend on extensive offline training. Robustness is demonstrated by treating uncertain and time-varying elements, including power consumption from air conditioning systems, variations in road slope, and passenger-related demands, as unknown disturbances. The desired state of charge is defined as a reference trajectory, and the control input is computed while ensuring compliance with all operational constraints. Validation results based on a combined driving profile confirm the effectiveness of the proposed controller in maintaining the battery charge, reducing fluctuations in fuel cell power output, and ensuring reliable performance under practical conditions. Comparative evaluations are conducted against two benchmark controllers: one designed to maintain a constant state of charge and another based on a soft actor–critic learning algorithm.

22 January 2026 in Electronics
Verified
Journal Article
Open access
PDF file
Charernkiat PochaiyaCharernkiat Pochaiya
Charernkiat Pochaiya
ABApidet Booranawong
Apidet Booranawong
DBDujdow Buranapanichkit
Dujdow Buranapanichkit
KTKriangkrai Tassanavipas
Kriangkrai Tassanavipas
HSHiroshi Saito
Hiroshi Saito
A device-free human detection system based on a received signal strength indicator (RSSI) monitors and analyzes the change of RSSI signals to detect human movements in a wireless network. This study proposes and implements a real-time, device-free human detection system based on an RSSI distribution-based detection method with an autonomous threshold. The novelty and contribution of our solution is that the RSSI distribution concept is considered and used to calculate the optimal threshold setting for human detection, while thresholds can be automatically determined from RSSI data streams gathered from test environments. The proposed system can efficiently work without requiring an offline phase, as introduced in many existing works in the research literature. Experiments using 2.4 GHz IEEE 802.15.4 technology have been carried out in indoor environments in two laboratory rooms with different numbers of wireless links, human movement patterns, and movement speeds. Experimental results show that, in all test scenarios, the proposed method can monitor and detect human movement in a wireless network in real time. It outperforms a comparative method and achieves high accuracy (i.e., 100% detection accuracy) with a low computational complexity requirement.