Optical emission spectroscopy and Langmuir probes were used to diagnose complex space-charge structures that appear inside and around a spherical grid with orifice applying a negative voltage below a critical value to it. Measurements (through the orifice) delivered the axial profiles of plasma potential, electron temperature and density, and of the densities of excited atoms and ions. Thereby the formation of a double layer was found in the region near the orifice with a potential drop close to the ionisation potential of the applied gas, confirming the presence of a fireball in that region (also evidenced by visual observation), i.e. of a quasi-spherical bright plasma region consisting of a positive core (an ion-rich plasma) confined by a double layer. Spectral investigations confirmed the presence of high ion density inside the spherical grid (due to the hollow cathode effect), while outside the grid a transition region with a strong rate of ionisation and excitation processes appears. Information on the nonlinear dynamics of this space-charge structure was obtained from the analysis of the oscillations of the discharge current, as well as of the floating potential inside and outside the spherical grid.
Herein we report on the synthesis and the effects of gradual loading of TiO2 nanotube array layers with ZnO upon surface wettability. Two-step preparation was chosen, where TiO2 nanotube layers, grown in a first instance by anodization of a Ti foil, were gradually loaded with controlled amounts of ZnO using the reactive RF magnetron sputtering. After crystallization annealing, the formerly amorphous TiO2 nanotubes were converted to predominantly anatase crystalline phase, as detected by XRD measurements. The as-prepared nanotubes exhibited a well-aligned columnar structure, 1.6 μm long and 88 nm in diameter, and a small concentration of oxygen vacancies. Ti2+ and Ti3+ occur along with the Ti4+ state upon sputter-cleaning the layer surfaces from contaminants. The Ti2+ and Ti3+ signals diminish with gradual ZnO loading. As demonstrated by the VB-XPS data, the ZnO loading is accompanied by a slight narrowing of the band gap of the materials. A combined effect of material modification and surface roughness was taken into consideration to explain the evolution of surface super-hydrophilicity of the materials under UV irradiation. The loading process resulted in increasing surface wettability with approx. 33%, and in a drastic extension of activation decay, which clearly points out to the effect of ZnO-TiO2 heterojunctions.
By negatively biasing a metallic grid with a small hole, down to a critical value of the applied potential a complex space-charge structure appears inside and around the grid cathode. The static current–voltage characteristic of the discharge shows one or two current jumps (the number of current jumps depending on the working gas pressure), one of them being of hysteretic type. Electrical probe measurements show a positive potential inside the grid cathode with respect to the potential applied on it. This is interpreted as being due to the hollow cathode effect. Thus, the inner fireball appears around the virtual anode inside the grid cathode. For more negative potentials, the electrons inside the cathode reach sufficient energy to penetrate the inner sheath near the cathode, passing through the hole and giving rise to a second fireball-like structure located outside the cathode. This second structure interacts with the negative glow of the discharge. The recorded time series of the discharge current oscillations reveal strongly nonlinear dynamics of the complex space-charge structure: by changing the negative potential applied on the grid cathode, the structure passes through different dynamic states involving chaos, quasi-periodicity, intermittency and period-doubling bifurcations, appearing like a competition of different routes to chaos.
A simple discharge is described which uses a permanent magnet as a cold cathode and the metallic chamber wall as an anode. The magnet's equator is biased strongly negative, which produces secondary electrons due to the impact of energetic ions. The emitted electrons are highly confined by the strong dipolar magnetic field and the negative potential in the equatorial plane of the magnet. The emitted electrons ionize near the sheath and produce further electrons, which drift across field lines to the anode while the nearly unmagnetized ions are accelerated back to the magnet. A steady state discharge is maintained at neutral pressures above . This is the principle of magnetron discharges, which commonly use cylindrical and planar cathodes rather than magnetic dipoles as cathodes. The discharge properties have been investigated in steady state and pulsed mode. Different magnets and geometries have been employed. The role of a background plasma has been investigated. Various types of instabilities have been observed such as sheath oscillations, current-driven turbulence, relaxation instabilities due to ionization, and high frequency oscillations created by sputtering impulses, which are described in more detail in companion papers. The discharge has also been operated in reactive gases and shown to be useful for sputtering applications.
1 August 2021 in Plasma Sources Science and Technology
A discharge plasma is created by simultaneously biasing two concentric spherical grids with axisymmetric orifices. In this geometry, space charge structures in the form of multiple quasi-spherical luminous plasma bodies appear simultaneously inside and around the cathodes. The plasma formations are highly interdependent supplying each other with the particle flow and current closure necessary for the maintenance of the discharge. To diagnose these structures, space-resolved cold Langmuir probe measurements and optical emission spectroscopy investigations were performed in the axial direction allowing for the mapping of the axial profiles of plasma potential, electron temperature and density, ion density and optical emission. The existence of an accelerating double layer in the vicinity of the holes has been confirmed here, and in previous research (Teodorescu-Soare C T et al 2016 Phys. Scr.91 034002; Schrittwieser R W et al 2017 Phys. Scr.92 044001; Teodorescu-Soare C T et al 2019 Int. J. Mass Spectrom.436 83). Besides the assessment of the relationship between discharge conditions and plasma parameters in the novel cathode system, the importance of a multiple concentric cathode discharge configuration is revealed for deposition applications.