Delia Aurora Cerlinca

Dr. Delia Aurora Cerlinca

Mechanics and Tehnologies, Ştefan cel Mare University of Suceava, Suceava, Romania
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2023 in Polymers
Verified
Journal Article
Open access
PDF file
TITamasag Ioan
Tamasag Ioan
IBIrina Besliu Bancescu
Irina Besliu Bancescu
TSTraian Lucian Severin
Traian Lucian Severin
Constantin DulucheanuConstantin Dulucheanu
Constantin Dulucheanu
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
The scientific literature regarding additive manufacturing, mainly the material extrusion method, suggests that the mechanical characteristics of the parts obtained by this technology depend on a number of the input factors specific to the printing process, such as printing temperature, printing trajectory, layer height, etc., and also on the post-process operations for parts, which, unfortunately, requires supplementary setups, equipment, and multiple steps that raise the overall costs. Therefore, this paper aims to investigate the influence of the printing direction, the thickness of the deposited material layer, and the temperature of the previously deposited material layer on the part tensile strength, hardness by means of Shore D and Martens hardness, and surface finish by using an in-process annealing method. A Taguchi L9 DOE plan was developed for this purpose, where the test specimens, with dimensions according to ISO 527-2 type B, were analysed. The results showed that the presented in-process treatment method is possible and could lead to sustainable and cost-effective manufacturing processes. The varied input factors influenced all the studied parameters. Tensile strength tended to increase, up to 12.5%, when the in-process heat treatment was applied, showed a positive linear variation with nozzle diameter, and presented considerable variations with the printing direction. Shore D and Martens hardness had similar variations, and it could be observed that by applying the mentioned in-process heat treatment, the overall values tended to decrease. Printing direction had a negligible impact on the additively manufactured parts’ hardness. At the same time, the nozzle diameter presented considerable variations, up to 36% for Martens hardness and 4% for Shore D, when higher diameter nozzles were used. The ANOVA analysis highlighted that the statistically significant factors were the nozzle diameter for the part’s hardness and the printing direction for the tensile strength.

28 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
TITamasag Ioan
Tamasag Ioan
CSCORNEL SUCIU
CORNEL SUCIU
IBIrina Besliu Bancescu
Irina Besliu Bancescu
Constantin DulucheanuConstantin Dulucheanu
Constantin Dulucheanu
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
The present paper aims to contribute to the methodology of 3D printing in-process colouring and study its implications and impact on the tensile strength and surface quality of the obtained parts. The proposed study was based on a Taguchi L27 DOE plan using standardised EN ISO 527-2 type 1B-shaped specimens, in which four factors on three levels were considered. The obtained results highlight the possibility of using the presented in-process colouring method. Different materials (PLA, PLA+, and PETG) with varying infill densities (15%, 30%, and 50%), colour distribution (33%, 66%, and 99%), and colour pigments (blue, green, and red) were studied and the results highlighted that the most influential parameter on the tensile strength of the parts was infill density, followed by the tested material, colour pigment, and colouring percentage; regarding surface roughness, the most influential parameter was infill density, followed by colouring percentage, colour pigment, and material. Moreover, the values resulting from the Taguchi DOE were compared to uncoloured parts, from which it could be concluded that the colouring of the parts had direct implications (negative for tensile strength and positive for surface roughness).

9 October 2024 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
TITamasag Ioan
Tamasag Ioan
IBIrina Besliu Bancescu
Irina Besliu Bancescu
TSTraian Lucian Severin
Traian Lucian Severin
Constantin DulucheanuConstantin Dulucheanu
Constantin Dulucheanu
Continuous research in the field of metal additive manufacturing has led to the need for constant improvement of manufacturing parameters especially in the case of FDM (Fused Deposition Modeling) manufacturing. In recent years, the main directions outlined for productivity and quality improvement were related to higher printing speed and the use of ironing-type processes. This article aims to study the manufacturing parameters of the dimensional accuracy and surface quality of FDM-manufactured 316L stainless steel. The degree of novelty is given by the application of the ironing process for the green part. A full factorial 33 experimental design was designed for this study, in which the factors studied were ironing angle, ironing speed, and layer spacing during ironing. The dimensional accuracy and surface roughness were analyzed by means of deviation measurement from CAD to the green part and final part after the sintering process. Using the design of experiments offers the possibility of applying the analysis of variance (ANOVA) which provides information about the degree of influence of each of the studied factors. The results obtained for the dimensional accuracy showed that the ironing direction had the biggest influence on the Z-axis shrinkage. Overall, approximately 6% shrinkage in the Z and Y directions was obtained while in the X directions, the shrinkage percentage was around 20%. Surface roughness showed an improvement with higher ironing speeds for the green part while for the sintered part the most significant factor was ironing spacing.

30 October 2025 in Systems
Verified
Journal Article
Open access
PDF file
LILucian Ispas
Lucian Ispas
CMCostel Mironeasa
Costel Mironeasa
TSTraian Lucian Severin
Traian Lucian Severin
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
Silvia MironeasaSilvia Mironeasa
Silvia Mironeasa
Artificial intelligence is increasingly used in all fields, especially in the area of risk management within Integrated Management Systems (IMS). The paper aims to highlight the role of artificial intelligence (AI) in risk management, therefore providing opportunities for industrial organizations, offering significant advantages for improving the efficiency and accuracy of risk assessment and mitigation processes. By using advanced AI technologies, organizations can anticipate and manage risks more effectively, therefore optimizing operational performance and resilience. We reviewed and explored the main applications of AI implementation, risk management, the barriers encountered, and the advantages and disadvantages of using AI. A holistic analysis of IMS risk management, identification and assessment, operational efficiency of routine tasks, real-time data analysis, and immediate decision-making using AI was performed. The methods and technologies used are analyzed, along with the associated challenges, providing a comprehensive perspective on the impact of AI in industrial organizations. We conclude that the use of AI addresses challenges related to data quality, model interpretation, ethical issues, and high costs of implementation and management, which require qualified personnel. Also, we conclude that the use of AI in risk management for IMS presents significant opportunities for industrial organizations, including enhanced process monitoring, rapid information analysis, and swift response to emerging risks. This enables the optimization of risk management strategies, ultimately leading to increased operational safety and efficiency.

20 January 2022 in Metals
Verified
Journal Article
Open access
PDF file
Constantin DulucheanuConstantin Dulucheanu
Constantin Dulucheanu
TSTraian Lucian Severin
Traian Lucian Severin
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
LILuminita Irimescu
Luminita Irimescu
In recent years, to reduce cars costs, research has been conducted on dual-phase steels with low manganese content (below 1.0%). This study investigated the influence of technological parameters of heat treatment (heating temperature and cooling medium) on such steels’ structures and mechanical properties. The ferrite-martensitic structures, specific for dual-phase steels, were obtained by intercritical quenching: heating of samples (made of alloys with 0.511% Mn, respectively 0.529% Mn) to temperatures located between critical points Ac1 and Ac3, followed by cooling in water without mechanical agitation and in water activated with ultrasounds at the frequency of 59 kHz. Through metallographic analyses and tensile tests, it was possible to determine the volume fraction of martensite, the ferrite microhardness, the ultimate tensile strength, the total elongation, and with the obtained data, their variations with the heating temperature and the cooling medium were established. Raising the heating temperature (between 760 °C and 820 °C) and using ultrasounds at cooling increased the volume fraction of martensite and the ferrite microhardness. This fact has increased the mechanical strength and reduced the deformability of the studied dual-phase steels. Intercritical quenching in water activated with ultrasounds provided values of structural characteristics and mechanical properties very close to those obtained by quenching in water without mechanical agitation, but was accomplished using a higher-temperature heating. The results obtained were compared with those determined in previous research, performed on dual-phase steel with 1.90% Mn.

5 September 2024 in Computation
Verified
Journal Article
Open access
PDF file
SAStelian ALACI
Stelian ALACI
LCLupascu Costica
Lupascu Costica
IRIonut Cristian Romanu
Ionut Cristian Romanu
DCDelia Aurora Cerlinca
Delia Aurora Cerlinca
FCFLORINA CIORNEI
FLORINA CIORNEI
Most studies in the literature consider the value of the coefficient of dynamic friction to be constant. We studied the evolution of a dynamic system when the coefficient of friction results in different values depending on the contact surfaces. A system with four balls fixed on an aluminium plate was driven with constant velocity into motion on the coaxial races of two identical outer bearing rings. The assembly presents a motion with periodic variable amplitude between two extremes, a fact that suggests the presence of a periodical excitation. The test was repeated, but this time, new bodies were used, which were two identical bodies made of two balls rigidised via a short cylindrical rod. When the rings were driven into rotational motion, the two bodies performed different motions; if the bodies were inter-changed, the differences between the motions remained. The rings were analysed, and a small region on the race of one ring was observed, where the roughness was considerably greater than the rest of the surface. Then, a mathematical model for the dynamic system with different friction coefficients was proposed and solved. This model is capable of simulating different situations, such as oscillatory motion and circular motion, with or without separation of the contacting bodies. Here, we present a dynamic model with Hertzian contact points in the presence of dry friction, with the coefficient of friction changing suddenly on the contacting surfaces.