To ensure the production of high-quality rubber products, establishing effective compatibility and robusting interactions between rubber and fillers is crucial. Since the rubber production industry faces significant environmental challenges, sustainability is becoming a necessity in the rubber business. Various materials, such as the presence of processing aids, might influence rubber-filler and filler-filler interactions. Petroleum oil as general processing oil has environmental issues, thus it is urgent to replace it with bio-based oil. This study addresses these concerns by investigating the impact of paraffinic oil and bio-based oil content on the interactions between silica/carbon black and natural rubber chains. Ranging from 0 to 10 phr, different dosages of these oils were employed. The rubber compound underwent milling using two rolled laboratory open mills post-blending with a laboratory internal mixer. Subsequently, mechanical properties were assessed. A Rubber Processing Analyzer was utilized to characterize interactions between uncured and cured silica/carbon black-filled natural rubber blends. The results revealed that all variations were distributed uniformly. Tan Delta results confirm that a chemical with a high bio-based oil concentration is easier to process. The carbon black with the largest peak of modulus values at low strain has the highest reinforcing or the poorest dispersion. Compounding with paraffinic oil has a high peak modulus value, resulting in poor dispersion when compared to bio-based oil. This research sheds light on the potential of bio-based oils as an eco-friendly alternative in rubber processing, contributing to sustainability efforts in the industry.
Alloying platinum (Pt) with transition metals such as nickel (Ni) has been an effective approach for reducing Pt loading and enhancing catalytic activities towards the sluggish oxygen reduction reaction (ORR) on the cathode of proton exchange membrane fuel cell (PEMFC). In this work, we advance the fabrication of PtNi alloy electrodes through direct synthesis on the gas diffusion layer (GDL) utilizing wet chemical reduction methods. The catalytic activities and binding interaction between Pt and Ni are optimized through annealing PtNi electrodes at 200 °C under different gas flows of N2 and the mixture of H2/N2 at 5%/95%. The physical characterization using X-ray diffraction (XRD) analysis and scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX) show the significant effect of the annealing environment on the morphology and distribution of the PtNi alloy catalyst on the GDL surface. The optimized electrodes exhibited enhanced ORR mass activity, with values of 8.17 and 18.26 mA mg−1 for PtNi annealed with N2 and N2/H2, respectively, surpassing the benchmark Pt/C (5.25 mA mg−¹). These results underscore the critical role of the annealing environment in optimizing the catalytic performance of PtNi-based electrodes for PEMFC applications, offering insights into more efficient fuel cell technologies.
9 December 2023 in Journal of The Institution of Engineers (India): Series D
This study evaluates the performance of ethylene propylene diene monomer (EPDM) composites for rubber sealing applications in a cable-based tsunami system. Rubber composites were prepared using EPDM rubber with varying monomer and filler content to determine the most suitable composite. Mechanical characterization reveals that the composition of EPDM and the amount of filler loading influence the mechanical properties. Dynamic mechanical analysis shows that ethylene and 5-ethylene-2-norbornene (ENB) content influence the glass transition and viscoelastic behavior of the composite. Thermal analysis of rubber composites using EPDM containing 70% ethylene and 5% ENB indicates no change in thermal stability due to prolonged immersion in seawater. Visual inspection using a microscope reveals no cracks on the surface of the rubber seal after the pressure chamber test for rubber composites utilizing EPDM with 70% ethylene and 5% ENB. It was shown that EPDM containing 70% ethylene and 5% ENB, with optimal reinforcement with 80 phr carbon black, exhibits the best performance for rubber sealing applications in subsea environments.