25 March 2025 in Indonesian Journal of Chemistry
AWAnindya Pramudya Wardhani
Anindya Pramudya Wardhani
+2
Alloying platinum (Pt) with transition metals such as nickel (Ni) has been an effective approach for reducing Pt loading and enhancing catalytic activities towards the sluggish oxygen reduction reaction (ORR) on the cathode of proton exchange membrane fuel cell (PEMFC). In this work, we advance the fabrication of PtNi alloy electrodes through direct synthesis on the gas diffusion layer (GDL) utilizing wet chemical reduction methods. The catalytic activities and binding interaction between Pt and Ni are optimized through annealing PtNi electrodes at 200 °C under different gas flows of N2 and the mixture of H2/N2 at 5%/95%. The physical characterization using X-ray diffraction (XRD) analysis and scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX) show the significant effect of the annealing environment on the morphology and distribution of the PtNi alloy catalyst on the GDL surface. The optimized electrodes exhibited enhanced ORR mass activity, with values of 8.17 and 18.26 mA mg−1 for PtNi annealed with N2 and N2/H2, respectively, surpassing the benchmark Pt/C (5.25 mA mg−¹). These results underscore the critical role of the annealing environment in optimizing the catalytic performance of PtNi-based electrodes for PEMFC applications, offering insights into more efficient fuel cell technologies.
2 January 2026 in Electrochimica Acta
23 March 2026 in Next Materials
26 August 2025 in International Journal of Innovative Research and Scientific Studies
The growing need for lightweight aluminum alloys in transportation and aerospace demands advanced surface protection solutions. While electroless Ni-P coating offers excellent corrosion resistance, its performance critically depends on zincating pretreatment - a process whose multi-step optimization remains insufficiently studied. This study investigates the influence of single, double, and triple zincating on the morphology of zincate layers and their subsequent impact on the deposition of electroless Ni-P coatings. AA5052 underwent zincating treatments in 200 g/L NaOH + 10 g/L ZnO solution before electroless Ni-P deposition at 80°C (pH5) in nickel sulfate and sodium hypophosphite. Surface characterization was performed using FE-SEM/EDS, while electrochemical properties were evaluated through EIS in 0.5M H2SO4 solution. Key findings demonstrate that double zincating generates an optimal surface morphology, in form of porous microstructure (average pore size of 0.28μm), that enhances Ni-P nucleation. This morphology yields the highest Ni percentage, and corrosion resistance exhibiting the largest arc radius semicircle. Single zincating produces discontinuous deposits (0.33μm granules), while triple treatment creates over-smoothed surfaces compromising adhesion. The study concludes that the porous Zn layer from double zincating optimizes Ni-P coating adhesion and corrosion protection by providing mechanical anchoring sites, whereas excessive pretreatment diminishes nucleation efficacy.