Dharman Kalaimurugan

Dr. Dharman Kalaimurugan

Post Doc
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 February 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
DKDharman Kalaimurugan
Dharman Kalaimurugan
Balamuralikrishnan BalasubramanianBalamuralikrishnan Balasubramanian
Balamuralikrishnan Balasubramanian
RGR K Govindarajan
R K Govindarajan
NANaif Abdullah Al-Dhabi
Naif Abdullah Al-Dhabi
MAMariadhas Valan Arasu
Mariadhas Valan Arasu
CKChart Khanongnuch
Chart Khanongnuch
Biosurfactant is a biodegradation accelerator that improves bioavailability and facilitates degradation by microorganisms. The study was meant to produce a novel biosurfactant molecule from Bacillussafensis YKS2. An efficient biosurfactant-producing strain, namely, Bacillus safensis YKS2, was selected using hemolytic activity, drop collapsing test, oil spreading test and blue agar plate methods in four oil-degrading strains isolated from a soil sample. Biosurfactant production in the optimization of bacteria culture conditions by RSM is a statistical grouping technique that is analyzed using the AVOVA approach to surface tention. In addition, the study was characterized by UV spectrophotometer FT-IR, HR-SEM, and GC-MS analyses to explain its structural and chemical details. Wastewater treatment was monitored for pH, EC, turbidity, alkalinity, chemical oxygen demand (COD), biochemical oxygen demand (BOD) and dissolved oxygen (DO) in order to justify the efficacy of the biosurfactant during wastewater treatment. The results of the UV spectrophotometer showed absorption at 530 nm, and the FT-IR analyzed carboxylic acids, alcohol and phenols groups, whichthe GC-MS analysis indicated were lipopeptide purified by hexadecanoic andtetradecanoic processes, respectively. The results show that the wastewater removal efficiency of 70% wasachieved within 24 h. In comparison, metagenomics was conducted during the treatment process to identify changes in the microbial load and diversity, which essentially indicatethe biosurfactant performance of the wastewater treatment process. The microbial load in the treated biosurfactant wastewater (84,374 sequences) was greatly decreased compared to untreated wastewater (139,568 sequences). It was concluded that B. safensis YKS2, producing a glycolipid form of biosurfactant, has possible benefits in the remediation of wastewater, and can be used for large-scale processing inbiosurfactant industries.

24 January 2023 in Fermentation
Verified
Journal Article
Open access
PDF file
AKAugchararat Klongklaew
Augchararat Klongklaew
KUKridsada Unban
Kridsada Unban
DKDharman Kalaimurugan
Dharman Kalaimurugan
AKApinun Kanpiengjai
Apinun Kanpiengjai
Hassan AzaizehHassan Azaizeh
Hassan Azaizeh
CKChart Khanongnuch
Chart Khanongnuch
This study demonstrated the bioconversion of lignocellulosic by-product corn stover (CS) to the value-added fermentative product L-lactic acid using the furfural tolerant Enterococcus mundtii WX1 and Lactobacillus rhamnosus SCJ9. The efficacy of dilute acid pretreatment by sulfuric and formic acids varying from 1% to 4% (v/v) concentration was compared. CS pretreated with 1% (v/v) sulfuric acid was selected for L-LA fermentation regarding the highest efficacy of fermentable sugar release when combined with the enzymatic hydrolysis process. Optimal conditions achieved a highest sugar release of 24.5 g/L glucose and 11.2 g/L of xylose from 100 g/L pretreated CS with 1% (v/v) sulfuric acid at 121 °C for 30 min, followed by enzymatic hydrolysis with Cellic CTec2 30 FPU/g pretreated CS at 50 °C for 48 h. The maximum L-LA titer, yield, and average productivity reached 31.4 g/L, 0.90 g/g, and 1.73 g/L/h, respectively. Moreover, addition of a hemicellulose-degrading enzyme complex combined with Cellic CTec2 led to an increase in xylose release, which resulted in a higher L-LA titer of 36.7 g/L at 48 h fermentation. Moreover, the purification of LA from culture broth by a process of electrodialysis with 331 g/L of LA and purity of 99.7% (w/w), was successful, with an optically pure L-LA of 99.9%. This study not only presents a feasible process for L-LA production from lignocellulose hydrolysate derived from abundant corn stover; this study also showed an alternative approach for solving the problem of haze air pollution caused by inappropriate management of corn production residuals.

13 September 2020 in Processes
Verified
Journal Article
Open access
PDF file
KUKridsada Unban
Kridsada Unban
NPNarongsak Puangkhankham
Narongsak Puangkhankham
AKApinun Kanpiengjai
Apinun Kanpiengjai
RGR K Govindarajan
R K Govindarajan
DKDharman Kalaimurugan
Dharman Kalaimurugan
CKChart Khanongnuch
Chart Khanongnuch
The present study aims to examine the process for L-lactic acid production from low-grade cassava chips (LGC) using a two-step fermentation approach (TSF) and simultaneous saccharification and fermentation (SSF) by proficient, newly isolated Lactobacillus rhamnosus strain SCJ9. The optimized medium composition revealed by response surface methodology for TSF was 166 g/L LGC hydrolysate and 20 g/L yeast extract (YE), while other medium components were fixed (g/L) as follows: tween80 (2.0), (NH4)2HPO4 (2.0), CH3COONa∙3H2O (6.0), (NH4)2HC6H5O7 (2.0), MgSO4∙7H2O (0.5), and MnSO4∙H2O (0.3). Based on the optimization conditions, the maximum experimental L-lactic acid of 134.6 g/L was achieved at 60 h fermentation time with a production efficiency of 89.73%, 0.95 g/g yield and 2.24 g/L/h productivity. In contrast, L-lactic acid production by SSF under optimized concentrations of thermostable-α-amylase (AA) and glucoamylase (GA) gave maximum L-lactic acid of 125.79 g/L at only 36 h fermentation time which calculated to the production efficiency, yield and productivity of 83.86%, 0.93 g/g and 3.49 g/L/h, respectively. The L-lactic acid production obtained from SSF was significantly improved when compared to TSF based on lower enzyme loading usage, shorter hydrolysis time and increase in production efficiency and productivity. Furthermore, there were no significant differences in the production by SSF between experiments conducted in laboratory bottle and 10-L fermenter. The results indicated the success of up-scaling for L-lactic acid production by SSF which could be developed for a further pilot-scale production of L-lactic acid.

17 August 2022 in Journal of Pure and Applied Microbiology
Verified
Journal Article
Open access
RLR. Lakshmanan
R. Lakshmanan
MPMuhammad Musthafa Poyil
Muhammad Musthafa Poyil
DKDharman Kalaimurugan
Dharman Kalaimurugan
SPSivasankar Palaniappan
Sivasankar Palaniappan
PONMURUGAN KARUPPIAHPONMURUGAN KARUPPIAH
PONMURUGAN KARUPPIAH
SVS. Venkatesan
S. Venkatesan
Plant growth-promoting rhizobacteria (PGPR) have proved to be an effective solution for enhancing growth of various plant species. Five different bacterial isolates extracted from rhizosphere soil were extensively studied for the production of indole acetic acid (IAA) and among those Bacillus safensis YKS2 strain was found to produce substantial quantities of IAA. B. safensis YKS2 strain was characterized and submitted to National Centre for Biotechnology Information (NCBI) (Gen Bank No. MH539636). Optimization of IAA production with varying pH and temperature revealed that IAA production was maximum at pH 7 and at a temperature of 37°C. The production of IAA was confirmed and quantified by Fourier-transform infrared spectroscopy (FTIR), Thin-layer chromatography (TLC), Gas chromatography-mass spectrometry (GC-MS). The PGPR inoculum showed significant (p<0.05) shoot increase (60.00 – 89.00%) and root increase (30.00 – 90.00%) relative to the controls in Vigna radiata. This study showed that IAA producing ability of B. safensis YKS2 can be used in the large-scale production of IAA for plant growth promotion.