The selection of effective surfactants potentially can mobilize oil up to 50% of residuals in mature carbonate oilfields. Surfactants’ screening for such oilfields usually is complicated by the high salinity of water, high lipophilicity of the rock surface, and the heterogeneous structure. A consideration of features of the oilfield properties, as well as separate production zones, can increase the deep insight of surfactants’ influence and increase the effectiveness of surfactant flooding. This article is devoted to the screening of surfactants for two production zones (Bashkirian and Vereian) of the Ivinskoe carbonate oilfield with high water salinity and heterogeneity. The standard core study of both production zones revealed no significant differences in permeability and porosity. On the other hand, an X-ray study of core samples showed differences in their structure and the presence of microporosity in the Bashkirian stage. The effectiveness of four different types of surfactants and surfactant blends were evaluated for both production zones by two different oil displacement mechanisms: spontaneous imbibition and filtration experiments. Results showed the higher effect of surfactants on wettability alteration and imbibition mechanisms for the Bashkirian cores with microporosity and a higher oil displacement factor in the flooding experiments for the Vereian homogeneous cores with lower oil viscosity.

Surfactant flooding can mobilize trapped oil and change the wettability of the rock to be more hydrophilic, which increases the oil recovery factor. However, the selection of surfactants is difficult in the case of high salinity conditions. In this work, we synthesized three novel anionic-nonionic surfactants based on widely used nonionic surfactant nonylphenol polyethoxylated (NPEO) and evaluated their efficiencies for enhanced oil recovery (EOR) in high salinity water (20% NaCl). The modified surfactants showed a decrease in interfacial tension (IFT) up to 10 times compared with the nonionic precursor. All surfactants had changed the wettability of rock to be more hydrophilic according to contact angle measurements. The effectiveness of surfactants was proved by spontaneous imbibition experiments, in which the synthesized surfactants showed a better displacement efficiency and increased oil production by 1.5–2 times. Filtration experiments showed an increase in oil recovery factor by 2–2.5 times in comparison with the nonionic NPEO. These promising results prove that the synthesis of new surfactants by modifying NPEO is successful and indicate that these novel surfactants have a great potential for EOR in high salinity reservoirs.

High mineralization of water complicates the use of foam in reservoir conditions. Anionic–nonionic surfactants are one of the best candidates for these conditions since they have both high surface activity and salt tolerance. One of the ways to obtain anionic–nonionic surfactants is to modify nonionic surfactants by an anionic group. The type of the group and its chemical structure can strongly affect the properties of the surfactant. In this work, widely-produced nonionic surfactant nonylphenol (12) ethoxylate (NP12EO) was modified by new types of carboxylic groups through the implementation of maleic (NP12EO-MA) and succinic (NP12EO-SA) anhydrides with different saturation levels. The main objectives of this work were to compare synthesized surfactants with nonionic precursor and to reveal the influence of unsaturated bonds in the carboxyl group on the properties of the foam. NaCl concentration up to 20 wt% was used to simulate high mineralization conditions, as well as to assess the effect of unsaturated bonds on foam properties. Synthesized anionic–nonionic surfactants retained surfactant solubility and long-term stability in high-salinity water, but have better foaming ability, as well as higher apparent viscosity, in porous media. The presence of an unsaturated bond in NP12EO-MA surfactant lowers foaming ability at high mineralization.