A graphene ballistic rectifier is used in conjunction with an antenna to demonstrate a rectenna as a terahertz (THz) detector. A small-area (<1 μm²) local gate is used to adjust the Fermi level in the device to optimize the output while minimizing the impact on the cutoff frequency. The device operates in both n- and p-type transport regimes and shows a peak extrinsic responsivity of 764 V/W and a corresponding noise equivalent power of 34 pW Hz^–1/2 at room temperature with no indications of a cutoff frequency up to 0.45 THz. The device also demonstrates a linear response for more than 3 orders of magnitude of input power due to its zero threshold voltage, quadratic current–voltage characteristics and high saturation current. Finally, the device is used to take an image of an optically opaque object at 0.685 THz, demonstrating potential in both medical and security imaging applications.

It has recently been shown that electronic states in bulk gapless HgCdTe offer another realization of pseudo-relativistic three-dimensional particles in condensed matter systems. These single valley relativistic states, massless Kane fermions, cannot be described by any other relativistic particles. Furthermore, the HgCdTe band structure can be continuously tailored by modifying cadmium content or temperature. At critical concentration or temperature, the bandgap collapses as the system undergoes a semimetal-to-semiconductor topological phase transition between the inverted and normal alignments. Here, using far-infrared magneto-spectroscopy we explore the continuous evolution of band structure of bulk HgCdTe as temperature is tuned across the topological phase transition. We demonstrate that the rest mass of Kane fermions changes sign at critical temperature, whereas their velocity remains constant. The velocity universal value of (1.07±0.05) × 10⁶ m s⁻¹ remains valid in a broad range of temperatures and Cd concentrations, indicating a striking universality of the pseudo-relativistic description of the Kane fermions in HgCdTe.

We present theoretical investigations of pressure- and temperature-driven phase transitions in HgTe quantum wells grown on a CdTe buffer. Using the eight-band $\mathbf{k}·\mathbf{p}$ Hamiltonian we calculate evolution of energy-band structure at different quantum well widths with hydrostatic pressure up to 20 kbars and temperature ranging up to 300 K. In particular, we show that, in addition to temperature, tuning of hydrostatic pressure allows us to drive transitions between semimetal, band insulator, and topological insulator phases. Our realistic band-structure calculations reveal that the band inversion under hydrostatic pressure and temperature may be accompanied by nonlocal overlapping between conduction and valence bands. The pressure and temperature phase diagrams are presented.

We study terahertz (THz) radiation transmission through grating-gate graphene-based nanostructures. We report on room-temperature THz radiation amplification stimulated by current-driven plasmon excitation. Specifically, with an increase of the dc current under periodic charge density modulation, we observe a strong redshift of the resonant THz plasmon absorption, followed by a window of complete transparency to incoming radiation and subsequent amplification and blueshift of the resonant plasmon frequency. Our results are, to the best of our knowledge, the first experimental observation of energy transfer from dc current to plasmons leading to THz amplification. Additionally, we present a simple model offering a phenomenological description of the observed THz amplification. This model shows that in the presence of a dc current the radiation-induced correction to dissipation is sensitive to the phase shift between oscillations of carrier density and drift velocity. And, with an increasing current, the dissipation becomes negative, leading to amplification. The experimental results of this work, as all obtained at room-temperature, pave the way toward the new 2D plasmon-based, voltage-tunable THz radiation amplifiers.

This paper presents an overview of the different methods used for sensitivity (i.e., responsivity and noise equivalent power) determination of state-of-the-art field-effect transistor-based THz detectors/sensors. We point out that the reported result may depend very much on the method used to determine the effective area of the sensor, often leading to discrepancies of up to orders of magnitude. The challenges that arise when selecting a proper method for characterisation are demonstrated using the example of a $2\times 7$ detector array. This array utilises field-effect transistors and monolithically integrated patch antennas at 620 GHz. The directivities of the individual antennas were simulated and determined from the measured angle dependence of the rectified voltage, as a function of tilting in the E- and H-planes. Furthermore, this study shows that the experimentally determined directivity and simulations imply that the part of radiation might still propagate in the substrate, resulting in modification of the sensor effective area. Our work summarises the methods for determining sensitivity which are paving the way towards the unified scientific metrology of FET-based THz sensors, which is important for both researchers competing for records, potential users, and system designers.

Due to their specific physical properties, HgCdTe-based heterostructures are expected to play an important role in terahertz photonic systems. Here, focusing on gated devices presenting inverted band ordering, we evidence an enhancement of the terahertz photoconductive response close to the charge neutrality point and at the magnetic field driven topological phase transition. We also show the ability of these heterostructures to be used as terahertz imagers. Regarding terahertz emitters, we present results on stimulated emission of HgCdTe heterostructures in their conventional semiconductor state above 30 THz, discussing the physical mechanisms involved and promising routes towards the 5–15 THz frequency domain.