In this paper, a new method for detecting and estimating the parameters of a binary phase shift keying (BPSK) signal, based on a cross-correlation function, is proposed. The proposed method consists of two stages. The first stage is used to detect or estimate a signal carrier frequency, and the second stage is used to estimate its pulse width or symbol rate. Firstly, the proposed method is investigated by use of a simulated BPSK signal in the form of Barker Codes 7, 11, and 13 in the MATLAB environment. Based on the simulation results, the functionality of this method is verified using a real-time BPSK signal generated by an E8267C generator. This is described in the second part of this paper. The experimental test results confirm that the proposed method is able to detect and estimate the parameters of all BPSK signals with
In this paper, an algorithm is proposed to estimate the carrier frequency and symbol rate of binary phase shift keying modulation with Barker codes in a high noise environment. The proposed algorithm is based on cross-correlation functions between unknown and reference signals. This algorithm divides into two estimators. The first one is used to estimate the carrier frequency and second one is to estimate the symbol rate with different types of binary phase shift keying signals with Barker Codes (7, 11, and 13). The superiority of the proposed algorithm is demonstrated by the analysis and simulations. The simulation results show that the required value of signal-to-noise ratio is to obtain the perfect probability of correct estimations, where (P ce = 100%) is SNR ≥ -26 dB for all test BPSK signals. It was confirmed that the algorithm is suitable for detecting and estimating the carrier frequency and symbol rate of the binary phase shift keying signals in a low signal to noise ratio.
30 December 2020 in Advances in Military Technology
The paper deals with the optimization of the sparse planar antenna array for direction of arrival (DOA) estimation in two dimensions (azimuth and elevation). The optimization algorithm was proposed on the basis of the peak sidelobe level (SLL) and half-power beamwidth (HPBW) parameters. In empirical validation, we have set up a measurement system to test the efficiency of an optimized array configuration. The array was configured using the patch antennas with frequency band 2.4 GHz. In comparison with several popular array configurations, the experimental results show that the proposed antenna array was optimized, and it provided higher accuracy and resolution in two-dimensional (2D) DOA estimation.
30 November 2025 in TNU Journal of Science and Technology
Bài báo này nghiên cứu một số kỹ thuật xử lý tín hiệu cho hệ thống trinh sát thụ động và tập trung vào biến đổi Fourier nhanh, biến đổi Fourier ngắn hạn, phân bố Wigner–Ville, và phân tích In-phase/Quadrature trong môi trường MATLAB. Kết quả mô phỏng cho thấy biến đổi Fourier nhanh cung cấp phổ tần số chi tiết, đặc biệt khi sử dụng số điểm biến đổi Fourier nhanh lớn; trong khi đó biến đổi Fourier thời gian ngắn cho phép biểu diễn thời gian–tần số nhưng suy giảm hiệu quả ở điều kiện tỷ số tín hiệu trên nhiễu thấp. Phân bố Wigner–Ville đạt độ phân giải vượt trội, không phụ thuộc kích thước cửa sổ và duy trì đặc tính tín hiệu trong môi trường nhiễu, mặc dù có thể xuất hiện nhiễu chéo. Phân tích In-phase/Quadrature cho phép trích xuất biên độ tức thời, pha và tần số, hỗ trợ nhận dạng điều chế. Kết quả so sánh ở nhiều mức tín/tạp cho thấy mỗi kỹ thuật có ưu và nhược điểm riêng. Biến đổi Fourier nhanh phù hợp cho phân tích miền tần số, biến đổi Fourier thời gian cân bằng phân tích thời gian–tần số, phân bố Wigner–Ville thể hiện độ bền vững và độ phân giải cao trong môi trường nhiễu, trong khi In-phase/Quadrature hỗ trợ đặc trưng chi tiết tín hiệu. Trong số đó, phân bố Wigner–Ville cho thấy khả năng chống nhiễu nổi bật, đặc biệt hữu ích cho phát hiện tín hiệu ra đa có xác suất bị chặn thấp. Các kết quả này nhấn mạnh vai trò của các phương pháp phân tích thời gian–tần số tiên tiến trong việc nâng cao hiệu năng ra đa thụ động, đồng thời tạo nền tảng cho các nghiên cứu tiếp theo trong xử lý tín hiệu ra đa.