Elena Aparicio-Esteve

Dr. Elena Aparicio-Esteve

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
AHAlvaro Hernandez
Alvaro Hernandez
Jesús UreñaJesús Ureña
Jesús Ureña
JCJose Manuel Villadangos Carrizo
Jose Manuel Villadangos Carrizo
Visible light positioning systems (VLPSs) are a feasible alternative to local positioning systems due to the technology improvement and massive use of light-emitting diodes (LEDs). Compared to other technologies, VLPSs can provide significant advantages, such as the achieved accuracy, although they still present some issues, mainly related to the reduced coverage area or the high computational load. This article proposes the design of a VLPS based on four LED lamps as transmitters and a quadrant photodiode angular diversity aperture (QADA) as a receiver. As the shape of the QADA is circular and the aperture to be installed over it is square, we derive the corresponding general equations to obtain the currents through the different pads of the QADA, regarding the angle of incidence of the light (and, inversely, how to estimate the angle of incidence from the measured currents). An encoding scheme based on 1023-bit Kasami sequences is proposed for every transmission from the LED lamps, thus providing multiple access capability and robustness against low signal-to-noise ratios and harsh conditions, such as multipath and near-far effect. A triangulation technique has been applied to estimate the receiver's position, by means of the least-squares estimator (LSE), together with some geometrical considerations. The proposal has been validated by simulation and by experimental tests, obtaining 3-D positioning average errors below 13 and 5.5 cm for separations between the transmitters' plane and the receiver of 2 and 1 m, respectively.

15 June 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
AHAlvaro Hernandez
Alvaro Hernandez
Jesús UreñaJesús Ureña
Jesús Ureña
Optical indoor positioning systems have experienced an increasing research interest during the last decade as they can provide 3-D centimeter accuracy using light emitting diode (LED) lighting. In the case of having several LEDs emitting simultaneously and a receiver (e.g., the tag to be localized), these systems face important challenges, such as very high dynamic ranges with low signal-to-noise ratios when the coverage area is increased, multiple access interference (MAI), multipath and near-far effects, calibration issues (misalignments in the receiver and other intrinsic parameters), and so on. Previous work have already shown the feasibility of using LED emitters in combination with quadrature angular diversity aperture (QADA) receivers to implement positioning systems. This work further introduces new design considerations, tested on an experimental setup, to enlarge the emitter-receiver range, thus increasing the total coverage, while dealing with the aforementioned challenges. The system applies encoding techniques to each transmitter to solve the multiple access problem. The performance of two different types of codes has been compared, as well as their influence on the final estimation of the receiver's position: one based on Kasami sequences and another based on loosely synchronous (LS) codes, derived from complementary sets of sequences. At the receiver, the estimation of the incident point is constrained to angles at which the system can be linearized, and a specific calibration process for this type of sensor has also been defined and applied. The proposal has been finally validated with simulated and experimental results in a large space of 2 ×2 m 2 (base), with a distance from transmitters to receiver of 3.4 m (height). The experimental tests at distances up to 4 m, carried out after the calibration process, achieve average absolute errors below 10 cm for X and Y axes and around 20 cm for Z axis, and standard deviations below 4 cm for X and Y axes, and around 30 cm for Z axis.

10 August 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
WRWillem Raes
Willem Raes
NSNobby Stevens
Nobby Stevens
Jesús UreñaJesús Ureña
Jesús Ureña
AHAlvaro Hernandez
Alvaro Hernandez
The research interest on indoor Location-Based Services (LBS) has increased during the last years, especially using LED lighting, since they can deal with the dual functionality of lighting and localization with centimetric accuracy. There are several positioning approaches using lateration and angular methods. These methods typically rely on the physical model to deal with the multipath effect, environmental fluctuations, calibration of the optical setup, etc. A recent approach is the use of Machine Learning (ML) techniques. ML techniques provide accurate location estimates based on observed data without requiring the underlying physical model to be described. This work proposes an optical indoor local positioning system based on multiple LEDs and a quadrant photodiode plus an aperture. Different frequencies are used to allow the simultaneous emission of all transmitted signals and their processing at the receiver. For that purpose, two algorithms are developed. First, a triangulation algorithm based on Angle of Arrival (AoA) measurements, which uses the Received Signal Strength (RSS) values from every LED on each quadrant to determine the image points projected from each emitter on the receiver and, then, implements a Least Squares Estimator (LSE) and trigonometric considerations to estimate the receiver's position. Secondly, the performance of a data-driven approach using Gaussian Processes is evaluated. The proposals have been experimentally validated in an area of 3 × 3m$^{2}$ and a height of 1.3 m (distance from transmitters to receiver). The experimental tests achieve p50 and p95 2D absolute errors below 9.38 cm and 21.94 cm for the AoA-based triangulation algorithm, and 3.62 cm and 16.65 cm for the Gaussian Processes.

9 August 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
Jesús UreñaJesús Ureña
Jesús Ureña
AHAlvaro Hernandez
Alvaro Hernandez
JCJose Manuel Villadangos Carrizo
Jose Manuel Villadangos Carrizo
Many indoor positioning applications related to accurate monitoring and tracking targets require centimeter precision. Infrared- and ultrasound-based systems represent a feasible approach providing high robustness against interference. Furthermore, their combination may achieve better performance by mitigating their complementary drawbacks, covering larger areas and improving the availability of positioning measurements. In this context, this work presents the proposal and experimental evaluation of a tightly-coupled fusion method that uses an Extended Kalman Filter to merge an infrared- and a ultrasound-based positioning system. An outlier detection method is considered to select measurements with an adequate performance. Experimental results reveal that the infrared and ultrasound systems are unable to position in 4.08% and 26.06% of locations, whereas the combined infrared-ultrasound system has 100% of availability. In addition, the merged solution achieves less than 4 cm of positioning error in 90% of cases, outperforming the IR and US systems when they work independently.

30 September 2021 in Sensors
Verified
Journal Article
Open access
PDF file
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
Jesús UreñaJesús Ureña
Jesús Ureña
AHAlvaro Hernandez
Alvaro Hernandez
DPDaniel Pizarro
Daniel Pizarro
DMDavid Moltó
David Moltó
The research interest on location-based services has increased during the last years ever since 3D centimetre accuracy inside intelligent environments could be confronted with. This work proposes an indoor local positioning system based on LED lighting, transmitted from a set of beacons to a receiver. The receiver is based on a quadrant photodiode angular diversity aperture (QADA) plus an aperture placed over it. This configuration can be modelled as a perspective camera, where the image position of the transmitters can be used to recover the receiver’s 3D pose. This process is known as the perspective-n-point (PnP) problem, which is well known in computer vision and photogrammetry. This work investigates the use of different state-of-the-art PnP algorithms to localize the receiver in a large space of 2 × 2 m2 based on four co-planar transmitters and with a distance from transmitters to receiver up to 3.4 m. Encoding techniques are used to permit the simultaneous emission of all the transmitted signals and their processing in the receiver. In addition, correlation techniques (match filtering) are used to determine the image points projected from each emitter on the QADA. This work uses Monte Carlo simulations to characterize the absolute errors for a grid of test points under noisy measurements, as well as the robustness of the system when varying the 3D location of one transmitter. The IPPE algorithm obtained the best performance in this configuration. The proposal has also been experimentally evaluated in a real setup. The estimation of the receiver’s position at three particular points for roll angles of the receiver of γ={0°, 120°, 210° and 300°} using the IPPE algorithm achieves average absolute errors and standard deviations of 4.33 cm, 3.51 cm and 28.90 cm; and 1.84 cm, 1.17 cm and 19.80 cm in the coordinates x, y and z, respectively. These positioning results are in line with those obtained in previous work using triangulation techniques but with the addition that the complete pose of the receiver (x, y, z, α, β, γ) is obtained in this proposal.

14 September 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EAElena Aparicio-Esteve
Elena Aparicio-Esteve
AHAlvaro Hernandez
Alvaro Hernandez
Jesús UreñaJesús Ureña
Jesús Ureña
JCJose Manuel Villadangos Carrizo
Jose Manuel Villadangos Carrizo
SLSergio Lluva-Plaza
Sergio Lluva-Plaza
Carmen Perez-RubioCarmen Perez-Rubio
Carmen Perez-Rubio
Nowadays, there is an increasing interest in smart systems, e.g., smart metering or smart spaces, for which active sensing plays an important role. In such systems, the sample or environment to be measured is irradiated with a signal (acoustic, infrared, radio-frequency…) and some of their features are determined from the transmitted or reflected part of the original signal. In this work, infrared (IR) signals are emitted from different sources (four in this case) and received by a unique quadrature angular diversity aperture (QADA) sensor. A code division multiple access (CDMA) technique is used to deal with the simultaneous transmission of all the signals and their separation (depending on the source) at the receiver’s processing stage. Furthermore, the use of correlation techniques allows the receiver to determine the amount of energy received from each transmitter, by quantifying the main correlation peaks. This technique can be used in any system requiring active sensing; in the particular case of the IR positioning system presented here, the relative amplitudes of those peaks are used to determine the central incidence point of the light from each emitter on the QADA. The proposal tackles the typical phenomena, such as distortions caused by the transducer impulse response, the near-far effect in CDMA-based systems, multipath transmissions, the correlation degradation from non-coherent demodulations, etc. Finally, for each emitter, the angle of incidence on the QADA receiver is estimated, assuming that it is on a horizontal plane, although with any rotation on the vertical axis Z. With the estimated angles and the known positions of the LED emitters, the position (x, y, z) of the receiver is determined. The system is validated at different positions in a volume of 3 × 3 × 3.4 m3 obtaining average errors of 7.1, 5.4, and 47.3 cm in the X, Y and Z axes, respectively.