FRANCESCO IANNUZZO

Prof. FRANCESCO IANNUZZO

Aalborg University
orcid

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2013
Verified
Conference Paper
Closed access
RWRui Wu
Rui Wu
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
Huai WangHuai Wang
Huai Wang
MLMarco Liserre
Marco Liserre
FRANCESCO IANNUZZOFRANCESCO IANNUZZO
FRANCESCO IANNUZZO
Reliability is one of the key issues for the application of Insulated Gate Bipolar Transistors (IGBTs) in power electronic converters. Many efforts have been devoted to the reduction of IGBT wear out failure induced by accumulated degradation and catastrophic failure triggered by single-event overstress. The wear out failure under field operation could be mitigated by scheduled maintenances based on lifetime prediction and condition monitoring. However, the catastrophic failure is difficult to be predicted and thus may lead to serious consequence of power electronic converters. To obtain a better understanding of catastrophic failure of IGBTs, the state-of-the-art research on their failure behaviors and failure mechanisms is presented in this paper. Moreover, various fault-tolerant design methods, to prevent converter level malfunctions in the event of IGBT failure, are also reviewed.

18 February 2016 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
ABAmir Sajjad Bahman
Amir Sajjad Bahman
KMKe Ma
Ke Ma
PGPramod Ghimire
Pramod Ghimire
FRANCESCO IANNUZZOFRANCESCO IANNUZZO
FRANCESCO IANNUZZO
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
The conventional RC-lumped thermal networks are widely used to estimate the temperature of power devices, but they lack of accuracy in addressing detailed thermal behaviors/couplings in different locations and layers of the high-power insulated gate bipolar transistor (IGBT) modules. On the other hand, a finite-element (FE)-based simulation is the other method, which is often used to analyze the steady-state thermal distribution of IGBT modules, but it is not possible to be used for a long-term analysis of load profiles of power converter, which is needed for reliability assessments and better thermal design. This paper proposes a novel 3-D RC-lumped thermal network for the high-power IGBT modules. The thermal coupling effects among the chips and among the critical layers are modeled, and boundary conditions, including the cooling conditions, are also considered. It is demonstrated that the proposed thermal model enables both accurate and fast temperature estimation of high-power IGBT modules in the real loading conditions of the converter while maintaining the critical details of the thermal dynamics and thermal distribution. The proposed thermal model is verified by both the FE-based simulation and the experimental results.

5 August 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NBNick Baker
Nick Baker
SMStig Munk-Nielsen
Stig Munk-Nielsen
FRANCESCO IANNUZZOFRANCESCO IANNUZZO
FRANCESCO IANNUZZO
MLMarco Liserre
Marco Liserre
An electrical method for junction temperature measurement of MOS-gated power semiconductor devices is presented. The measurement method involves detecting the peak voltage over the external gate resistor of an insulated-gate bipolar transistor or MOSFET during turn-on. This voltage is directly proportional to the peak gate current, and fluctuates with temperature due to the temperature-dependent resistance of the internal gate resistance. Primary advantages of the method include an immunity to load current variation, and a good linear relationship with temperature. A measurement circuit can be integrated into a gate driver with no disruption to operation and allows autonomous measurements controlled directly via the gate signal. Advantages and disadvantages of the method are discussed.

16 October 2014 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NSNicolae-Cristian Sintamarean
Nicolae-Cristian Sintamarean
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
Huai WangHuai Wang
Huai Wang
FRANCESCO IANNUZZOFRANCESCO IANNUZZO
FRANCESCO IANNUZZO
PRPeter de Place Rimmen
Peter de Place Rimmen
This paper introduces a reliability-oriented design tool for a new generation of grid-connected photovoltaic (PV) inverters. The proposed design tool consists of a real field mission profile (RFMP) model (for two operating regions: USA and Denmark), a PV panel model, a grid-connected PV inverter model, an electrothermal model, and the lifetime model of the power semiconductor devices. An accurate long-term simulation model able to consider the one-year RFMP (solar irradiance and ambient temperature) is developed. Thus, the one-year estimation of the converter device thermal loading distribution is achieved and is further used as an input to the lifetime model. The proposed reliability-oriented design tool is used to study the impact of mission profile (MP) variation and device degradation (aging) in the PV inverter lifetime. The obtained results indicate that the MP of the field where the PV inverter is operating has an important impact (up to 70%) on the converter lifetime expectation, and it should be considered in the design stage to better optimize the converter design margin. In order to have correct lifetime estimation, it is crucial to consider also the device degradation feedback (in the simulation model), which has an impact of 20-30% on the precision of the lifetime estimation for the studied case.

10 March 2016 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
RWRui Wu
Rui Wu
Huai WangHuai Wang
Huai Wang
KPKristian Bonderup Pedersen
Kristian Bonderup Pedersen
KMKe Ma
Ke Ma
PGPramod Ghimire
Pramod Ghimire
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
A basic challenge in the insulated gate bipolar transistor (IGBT) transient simulation study is to obtain the realistic junction temperature, which demands not only accurate electrical simulations but also precise thermal impedance. This paper proposed a transient thermal model for IGBT junction temperature simulations during short circuits or overloads. The updated Cauer thermal model with varying thermal parameters is obtained by means of finite-element method (FEM) thermal simulations with temperature-dependent physical parameters. The proposed method is applied to a case study of a 1700 V/1000 A IGBT module. Furthermore, a testing setup is built up to validate the simulation results, which is composed of a IGBT baseplate temperature control unit, an infrared camera with a maximum of 3 kHz sampling frequency, and a black-painted open IGBT module.

27 May 2016 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NBNick Baker
Nick Baker
LDLaurent Dupont
Laurent Dupont
SMStig Munk-Nielsen
Stig Munk-Nielsen
FRANCESCO IANNUZZOFRANCESCO IANNUZZO
FRANCESCO IANNUZZO
Marco LiserreMarco Liserre
Marco Liserre
Infrared measurements are used to assess the measurement accuracy of the peak gate current (IGPeak) method for Insulated-gate bipolar transistor (IGBT)junction temperature measurement. Single IGBT chips with the gate pad in both the center and the edge are investigated, along with paralleled chips, as well as chips suffering partial bondwire lift-off. Results are also compared with a traditional electrical temperature measurement method: the voltage drop under low current (VCE (low )). In all cases, the IGPeak method is found to provide a temperature slightly overestimating the temperature of the gate pad. Consequently, both the gate pad position and chip temperature distribution influence whether the measurement is representative of the mean junction temperature. These results remain consistent after chips are degraded through bondwire lift-off. In a paralleled IGBT configuration with nonnegligible temperature disequilibrium between chips, the IGPeak method delivers a measurement based on the average temperature of the gate pads.