FELICITAS CALDERON-VEGA

Dr. FELICITAS CALDERON-VEGA

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 November 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AGAdrián-David García-Soto
Adrián-David García-Soto
FELICITAS CALDERON-VEGAFELICITAS CALDERON-VEGA
FELICITAS CALDERON-VEGA
CACesar Mösso Aranda
Cesar Mösso Aranda
JVJesús Gerardo Valdés-Vázquez
Jesús Gerardo Valdés-Vázquez
AHAlejandro Hernández-Martínez
Alejandro Hernández-Martínez
The normality polynomial and multi-linear regression approaches are revisited for estimating the reliability index, its precision, and other reliability-related values for coastal and structural engineering applications. In previous studies, neither the error in the reliability estimation is mathematically defined nor the adequacy of varying the tolerance is investigated. This is addressed in the present study. First, sets of given numbers of Monte Carlo simulations are obtained for three limit state functions and probabilities of failure are computed. Then, the normality polynomial approach is applied to each set and mean errors in estimating the reliability index are obtained, together with its associated uncertainty; this is defined mathematically. The data is also used to derive design points and sensitivity factors by multi-linear regression analysis for given tolerances. Results indicate that power laws define the mean error of the reliability index and its standard deviation as a function of the number of simulations for the normality polynomial approach. Results also indicate that the multi-linear regression approach accurately predicts reliability-related values if enough simulations are performed for a given tolerance. It is concluded that the revisited approaches are a valuable option to compute reliability-associated values with reduced simulations, by accepting a quantitative precision level.

Verified
Journal Article
Open access
PDF file
Victor-Manuel Lomeli-QuinteroVictor-Manuel Lomeli-Quintero
Victor-Manuel Lomeli-Quintero
FELICITAS CALDERON-VEGAFELICITAS CALDERON-VEGA
FELICITAS CALDERON-VEGA
CACesar Mösso Aranda
Cesar Mösso Aranda
ASAgustín Sanchez-Arcilla
Agustín Sanchez-Arcilla
AGAdrián-David García-Soto
Adrián-David García-Soto
Climate change is an increasingly critical issue impacting coasts and coast structures, leading to erosion, flooding, sea level rise, etc. These significantly impact not only the environment and society, but also the regional infrastructure and economy. This study focused on assessing the costs associated with climate change along the coast of Catalonia. An innovative tool in Python called GCIFS (Georeferenced Impact Forecast System) was developed for the assessment, which is based on LiDAR measurements, cartography, and online databases to predict future coastlines and economic impacts. The proposed methodology considered unique beach-specific scenarios, and multiple direction and altitude vectors to identify difficult-to-erode areas and existing protections were generated. Seven approaches based on forecasted sea-level rise with and without coastal geomorphology were applied to 262 beaches. Local impact factors and potential protection, using detailed data on infrastructure and building typology, were included in the cost evaluation, resulting in estimated costs by the year 2100 of EUR 8846.00 million for the worst-case scenario, EUR 3587.36 million for a conservative prediction including geomorphology, and EUR 822.67 million for a prediction based on local erosion and geomorphology. It was concluded that 170,676 m of protection structures is required. The selected approach, technologies, and detailed information are critical for an adequate assessment.

1 November 2025 in Coasts
Verified
Journal Article
Open access
PDF file
CACesar Mösso Aranda
Cesar Mösso Aranda
MVManuel Viñes
Manuel Viñes
CACarlos Astudillo
Carlos Astudillo
Vicente GraciaVicente Gracia
Vicente Gracia
DGDaniel González-Marco
Daniel González-Marco
ASAgustín Sanchez-Arcilla
Agustín Sanchez-Arcilla
The Mediterranean coast is known for its great tourist attractions, concentration of population, and economic activities. Specifically, in the autonomous regions like Catalonia and Valencia, more than half of the population lives in coastal counties, and the population during the summer months increases due to the influx of tourists. Furthermore, in this stretch of coast, there are some areas of natural interest such as the Delta del Ebro or the Albufera, which are two of the most important wetland areas in the Mediterranean. However, according to studies by Day Today, the retreat of the coastline has increased in recent years, and this influences management of coastal territory both directly and indirectly, mostly harming all sectors with low levels, creating spaces with significant problems. It is for this reason that reporting on climate change and the impact on the coasts is assuming an important role in society, because they are essential tools for planning and management costs. In this thesis, the ground that would be affected by a +1 m, +2 m, and +3 m increase in average sea level, as simulated by the existing flood simulator, has been quantified. And a methodology has been developed for determining the vulnerability of the land based on flooding provided by terrain elevations, and each area studied was evaluated with different degrees of vulnerability: very high, high, moderate, or low. Finally, a first estimate has been made of economic loss that could involve a meter rise in the average sea level for Catalan beaches, and major damage to natural parks, urban areas, and major infrastructure has been identified. This study shows that there are nine areas with high vulnerability due to the low heights of their territory, and the majority of the flooded land is concentrated in the Ebro Delta and the Albufera, which jointly dominate the totals across scenarios.

13 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FELICITAS CALDERON-VEGAFELICITAS CALDERON-VEGA
FELICITAS CALDERON-VEGA
AGAdrián-David García-Soto
Adrián-David García-Soto
CACesar Mösso Aranda
Cesar Mösso Aranda
Simultaneous occurrence of metocean variables can present a multihazard to maritime systems. However, simplified design approaches to assess simultaneous significant wave heights and wind velocities are lacking, especially if seasonality is considered. This is addressed in this study by using extreme significant wave heights and companion wind velocities recorded in the Gulf of Mexico. Time-dependent, generalized extreme value (GEV) models and classical regression are the basis to propose a simplified approach to estimate correlated extreme significant wave heights and wind velocities associated with given return periods, accounting for seasonality and including measures of uncertainty. It is found that the proposed approach is a new but simple method to adequately characterize the concurrent extreme metocean variables and their uncertainty. It is concluded that the method is an effective probabilistic design tool to determine simultaneous extreme significant wave heights and companion wind velocities for desired return periods and seasonality.

Verified
Journal Article
Open access
PDF file
LHLuz Adriana Arias Hernández
Luz Adriana Arias Hernández
Maria Maldonado SantoyoMaria Maldonado Santoyo
Maria Maldonado Santoyo
LDLucía Delgadillo-Ruiz
Lucía Delgadillo-Ruiz
RSRudy Solís Silván
Rudy Solís Silván
FELICITAS CALDERON-VEGAFELICITAS CALDERON-VEGA
FELICITAS CALDERON-VEGA
EDEladio Delgadillo
Eladio Delgadillo
Synthetic plastic impacts the environment due to its slow degradation and the generation of microplastics, driving the development of bioplastics. This study evaluated the use of bagasse fiber combined with corn and potato starch to improve the physical and mechanical properties of bioplastics. Five bioplastic mixtures (Am1 to Am5) were prepared with corn starch, glycerin, acetic acid, maleic anhydride, and agave bagasse. Am1 was prepared without bagasse, and the others were prepared with different amounts of bagasse (0, 10, 30, 50, and 70 g). Bioplastics made from potato starch (Ap1 to Ap5) were also produced under the same conditions and were assessed using the thermogravimetric (TGA) and scanning electron microscopy (SEM) tests. Analysis of variance showed significant differences (p < 0.001) in the moisture, Young’s modulus, and stress of the bioplastics. The corn-based bioplastics exhibited lower moisture values (7.26% and 5.51%) compared to the potato-based ones (9.68% to 8.89%). Young’s modulus and stress increased in the corn-based (Am5 = 4.59 MPa) and potato-based (Ap5 = 3.53 MPa) bioplastics with higher amounts of bagasse. Furthermore, TGA and SEM revealed the surface morphology and the effects of processing, and based on their results, it was found that agave bagasse improved the mechanical and thermal properties of bioplastics, especially corn-based ones, suggesting its potential as a material with a lower environmental impact.

31 August 2024 in Ciencia Nicolaita
Verified
Journal Article
Open access
PDF file
LHLuz Adriana Arias Hernández
Luz Adriana Arias Hernández
EVEmilio Juaristi Videgaray
Emilio Juaristi Videgaray
HMHéctor Eduardo Mares Martínez
Héctor Eduardo Mares Martínez
RSRudy Solís Silván
Rudy Solís Silván
Maria Maldonado SantoyoMaria Maldonado Santoyo
Maria Maldonado Santoyo
EDEladio Delgadillo
Eladio Delgadillo
El uso de ecoplásticos para la implementación de acolchados contribuye a conservar la humedad del suelo y reducir la evaporación. El objetivo de este trabajo, por una parte, fue presentar una revisión de sobre la implementación de acolchados para proteger a los cultivos en la evapotranspiración, por otro lado, se realizaron pruebas a nivel experimental para la aplicación de ecoplásticos como acolchados, los cuáles se fabricaron a partir de 5 mezclas de compuestos orgánicos en diferentes proporciones y se evalúo el porcentaje de absorción de agua y humedad de los mismos mediante el método gravimétrico y el porcentaje de absorción de agua por método gravimétrico después de la inmersión, respectivamente. El análisis de Kruskal Wallis indicó diferencias significativas en las medianas del porcentaje de absorción de agua y humedad de las diferentes mezclas de bioplásticos probadas. Estos hallazgos respaldan la relevancia de los ecoplásticos como una alternativa en prácticas agrícolas.