The rapid growth of the wind energy industry has resulted in a significant increase in Wind Turbine Blade (WTB) waste, posing challenges for recycling due to the composite materials used in their construction. Several proposed techniques, including mechanical, thermal, and chemical processes, have been considered for wind-blade recycling, but determining the most effective approach remains a critical issue. This study presents the first comprehensive systematic review of available wind-blade recycling processes, evaluating their economic, technical, and environmental performance. Additionally, we consider the physical and mechanical properties of the recycled materials, which can aid in identifying potential markets for these materials. Among the various recycling technologies, microwave pyrolysis emerges as the most promising technique for recycling large quantities of WTB, despite some challenges and uncertainties surrounding its effectiveness and feasibility at an industrial scale. However, the optimal recycling technique for WTB will depend on multiple factors, including the blade material, the desired environmental impact, and the economic feasibility of the process. Based on this review, mechanical recycling appears to be more energy-efficient, while the fluidised bed recycling process demonstrates a lower primary energy demand, global warming potential, and power consumption. These findings provide valuable guidance for decision-makers in the wind energy industry to develop effective waste management strategies and plans for sustainable wind energy development. Addressing WTB waste and implementing efficient recycling techniques will be critical in mitigating environmental impacts and promoting sustainability in the renewable energy sector as the wind energy industry grows.

The integration of phase-change materials (PCMs) into thermal energy storage systems offers significant potential for reducing energy consumption and improving thermal comfort, crucial issues for achieving sustainable building stocks. Nevertheless, the performance of PCM-based systems is strongly influenced by the container geometry. Among the various forms of incorporating PCMs into building applications, macroencapsulation is the most versatile and is, therefore, widely used. Herewith, this paper analyzes the impact of macrocapsule geometry on PCM thermal performance. Thermal properties of the material were first tested using Differential Scanning Calorimetry at five heating/cooling rates to evaluate its influence on phase-change temperatures and enthalpy. Then, an experimental setup evaluated four macrocapsule geometries on the enclosed PCM behavior during charging and discharging processes. The PCM characterization revealed that the slowest-tested rate minimized the supercooling effect. Analysis across different macrocapsule geometries showed that sectioning the contact surface improved heat transfer efficiency by fully mobilizing the PCM and reducing phase-change times. Conversely, double-layered geometry designs hindered heat transfer, presenting challenges in completing PCM charging and discharging. These findings suggest that optimizing its performance is a necessary direction for further research, which may include adjusting the PCM operating temperature range across layers or redesigning the geometry to misalign contact surfaces.

Waste from the wind power and textile industries poses major environmental challenges. While the textile industry is a significant global contributor to waste, producing around 92 million tons of waste annually, and greenhouse gas emissions, wind power, although one of the cleanest energy sources during operation, still generates waste and associated CO₂ emissions, particularly associated with the end-of-life decommissioning of turbine blades. This waste can be reused, combined with bio-based binders, to reduce the construction sector’s long-term environmental impact. The present work identifies research trends and gaps in the use of these waste materials, either individually or combined, for the development of thermal and acoustic insulation solutions for the construction sector, by means of a combined bibliometric and content analysis of Scopus and Web of Science documents from 2014 to 2025. The study focuses on bibliometric indicators and reports on physical properties (thermal conductivity, density, mechanical strength, and acoustic performance) of the resulting composites, including those produced with bio-binders. Additionally, a qualitative review of life cycle assessment studies indicates that bio-based and waste-derived insulation materials can significantly reduce environmental impacts compared with conventional mineral or petrochemical insulators. Results reveal growing scientific interest in this subject, highlighting an annual publication growth of 5.09%. They emphasize the performance of natural textile fibers in thermal and acoustic insulation, the mechanical capacity of synthetic fibers, and the semi-structural potential of fiberglass composites. Meanwhile, bio-binders improve the upcycling of textile waste; however, they reveal a significant research gap in the integration of wind turbine blade waste into insulation composites. No indexed studies were found that simultaneously combine textile waste, blade-derived fibers, and bio-based binders in a single insulation system, despite projected cumulative blade waste of 43 million tons by 2050. These findings advocate hybrid innovations and standardized assessments to drive circular economy and low-carbon building solutions.

Waste from the wind power and textile industries poses considerable challenges concerning CO2 emissions. While the textile industry is a major global contributor to waste, producing around 92 million tons of waste annually, and greenhouse gas emissions, wind power, although one of the cleanest energy sources during operation, still generates waste and associated CO2 emissions, particularly associated with the end-of-life decommissioning of turbine blades. In addition to reusable waste, bio-based solutions, such as bio-binders, can reduce the construction sector’s long-term environmental impact. The present work aims to identify trends and opportunities in the use of these waste materials, either individually or combined, for the development of thermal and acoustic insulation solutions for use in the construction sector. With that purpose, a bibliometric and content analysis of scientific articles indexed in Scopus and Web of Science from 2014 to 2025 was carried out. The study focuses on the physical properties of the resulting composites, including those produced with bio-binders. Results reveal growing scientific interest, highlighting an annual publication growth of 5.09 %. They emphasize the excellence of natural textile fibers in thermal and acoustic insulation, the mechanical capacity of synthetic fibers, and the semi-structural potential of fiberglass composites. Meanwhile, bio-binders improve the upcycling of textile waste; however, they reveal a critical gap in wind turbine blade integration. These findings advocate hybrid innovations and standardized assessments to drive circular economy and low-carbon building solutions.