Ghassan Suleiman

Dr. Ghassan Suleiman


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2024 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
GSGhassan Suleiman
Ghassan Suleiman
Mohammad K YounesMohammad K Younes
Mohammad K Younes
MEMurat Ergun
Murat Ergun
MAM. F. Abushammala
M. F. Abushammala
MAMohammad Aljaradin
Mohammad Aljaradin
The frequency and severity of traffic accidents are causing growing concern. This study aims to develop a tool to improve the traffic safety level on roundabouts and identify the influence of traffic operations, geometric parameters, weather, and time of day on improving roundabout traffic safety. It is the first study to evaluate the performance of the integrated Median Ranked Set Sample (MRSS) and Analytic Hierarchy Process (AHP) with statistical analysis. A hierarchy tree of accident causes has been developed using data gathered from accident reports and relevant authorities. Then, the selected stakeholders’ professionals prioritized the traffic accident causes using a MRSS and AHP. Moreover, traffic microsimulation software VISSIM was also used to extract traffic operation parameters for the analysis. Afterwards, Analysis of Variance (ANOVA) was used to validate the causes of traffic accidents. The results show that geometric design accounts for 36% of accidents at roundabouts, followed by traffic operation (22%). However, conflicting and queuing lengths are responsible for about 20% of traffic accidents. The tools developed, and the causes of accidents determined in this study will help geometric designers and city planners to take the necessary measures to minimize accidents and enhance traffic safety levels in urban areas. Doi: 10.28991/CEJ-2024-010-04-013 Full Text: PDF

1 December 2021 in Civil and Environmental Engineering
Verified
Journal Article
Open access
PDF file
Mohammad K YounesMohammad K Younes
Mohammad K Younes
GSGhassan Suleiman
Ghassan Suleiman
MAMohammed F. M. Abushammala
Mohammed F. M. Abushammala
KOKhaled Al Omari
Khaled Al Omari
Noise became one of the main environmental indicators of the quality of urban life. The aim of this study was to develop a traffic noise model for an arterial road in Amman, the capital of Jordan, which was being subjected to a persistent increase in traffic and its related issues. The characteristics of the traffic and its relevant noise were analysed to develop a noise prediction model using an adaptive neuro-fuzzy inference system (ANFIS). A geographic information system (GIS) was then implemented to model the current noise along the arterial road. The results of ANFIS model showed that traffic delays and the percentage of heavy vehicles were the main causes of traffic noise generation within the urban area. However, the developed ANFIS model can simulate traffic noise with a relatively low root mean square error. Furthermore, this study will help to improve the perception about traffic noise and its development along arterial roads.

26 September 2024 in Buildings
Verified
Journal Article
Open access
PDF file
GSGhassan Suleiman
Ghassan Suleiman
Ala AbutaqaAla Abutaqa
Ala Abutaqa
MEMURAT Ergun
MURAT Ergun
DQDeya Qtiashat
Deya Qtiashat
MAmervat omar abu-rumman
mervat omar abu-rumman
AKAli Sercan Kesten
Ali Sercan Kesten
This experimental study evaluated the performance of modified asphalt mixtures prepared by incorporating 2%, 4%, and 6% linear low-density polyethylene (LLDPE) by weight of asphalt binder through a series of tests. The microstructural analyses using scanning electron microscopy (SEM) were conducted on asphalt samples to assess the engineering properties of the asphalt mixes. Finally, ANOVA statistical analysis has been employed to determine the statistical significance of the differences in all tests’ means. Based on laboratory findings, the Marshall stability test result showed that the modified asphalt mixes up to 4% LLDPE had enhanced performance by 12.7% compared to the control mix. A significant decrease (up to 31.3%) in binder penetration was demonstrated due to the incorporation of LLDPE into the asphalt mix. The softening point of the LLDPE–asphalt mixes was increased by up to 17.6%. It was also demonstrated that the incorporation of such LLDPE dosages maintains the flow limits within the specified range; however, the flow of the asphalt mix with 4% LLDPE was 3.17 mm which is the nearest to the average value of the upper and lower acceptable limits. The air voids of mixes with LLDPE content more than 4% by was decreased to less than 4% which is not recommended in high-temperature climates to control mixture bleeding. Microscopic analysis revealed an improvement in the densification of asphalt microstructures, attributed to the LLDPE particles significantly changing the rheology and viscosity of the base mixture and making the hot asphalt mixture more homogeneous. Based on the physical and rheological properties investigated in this study, it could be concluded that 4% LLDPE produces the best performance in asphalt mixtures. Overall, the ANOVA analysis demonstrated that the incorporation of LLDPE into asphalt mixes has a significant impact on all of their properties.

31 May 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Ala AbutaqaAla Abutaqa
Ala Abutaqa
GSGhassan Suleiman
Ghassan Suleiman
Ahmed SenouciAhmed Senouci
Ahmed Senouci
Mohamed MohsenMohamed Mohsen
Mohamed Mohsen
The micro-encapsulation procedure of calcium nitrate in urea-formaldehyde shell is well known. The most recent developed method for the synthesis of the calcium nitrate self-healing micro-capsules was based on the in-situ polymerization using water-in-oil emulsion. Although the microcapsules’ yield was significantly improved using this approach, incorporating the micro-capsules into concrete mixes has been found to reduce strength. One potential strength reduction cause might be the presence of sulfonic acid as a component in the continuous (oil) phase. As the anionic surfactant, Aerosol OT (AOT) has been widely used to prepare water-in-oil emulsions and to form aggregates in non-polar solvents; submicron calcium nitrate refined microcapsules were synthesized using AOT in hexane solution. While the aqueous phase in the original encapsulation procedure has not been altered, the continuous organic phase was prepared by dissolving AOT in hexane. The prepared microcapsules were characterized using Scanning Electron Microscopy (SEM). The preliminary assessment of the effect of incorporating of the refined microcapsules into cementitious materials has been carried out by preparing mortar mixes using 75% capsules’ concentration (by weight of cement). The reported yield values, average shell thickness, and average diameter of the prepared microcapsules were found satisfactory. Moreover, the mortar samples containing calcium nitrate refined microcapsules that were prepared using the proposed method did not experience significant reduction in their mechanical properties. Hence, such encapsulation procedure may be adopted for further investigation of the self-healing efficiency in cementitious materials of the microcapsules prepared using the proposed procedure. Future work shall be directed towards this end.

13 October 2017 in Environmental Engineering Research
Verified
Journal Article
Open access
PDF file
GSGhassan Suleiman
Ghassan Suleiman
Mohammad K YounesMohammad K Younes
Mohammad K Younes
GAGhassan A. Al-Dulaimi
Ghassan A. Al-Dulaimi

1 June 2024 in Civil and Environmental Engineering
Verified
Journal Article
Open access
PDF file
GSGhassan Suleiman
Ghassan Suleiman
HAHaider Habeeb. Aodah
Haider Habeeb. Aodah
SHShadi Hanandeh
Shadi Hanandeh
MEMurat Ergun
Murat Ergun
RSReem Abu Salim
Reem Abu Salim
DQDeya Qtiashat
Deya Qtiashat
Jordan's road network continues to deteriorate as a consequence of the continuous increase in traffic and the absence of adequate maintenance work. The primary objective of this study was to enhance HMA performance by using polymer-modified asphalt mixtures. The polymer modifier known commercially as Eastman (EE-2) was mixed with binder penetration grade (60–70) at a ratio of 12%. In order to investigate the performance of polymer, the dynamic creep, the resilient modulus and the stability-flow tests were performed. Marshall Mix design was utilized to prepare a total of 50 samples, of which 20 were used to determine the optimal binder content, and the remaining samples were used to determine the effect of EE-2 modifier on asphalt mixtures. The results showed that the optimal asphalt content was 4.57 percent and revealed that the addition of EE-2 polymer to asphalt cement contributed to the production of a variety of desirable properties. The most important indicator of these developments is increased rutting resistance. For instance, the total permanent deformation has decreased by 87% (8500 to 1000 μm). Conversely, addition of EE-2 has resulted in a threefold increase in the resilience modulus (from 3632 to 10590 MPa). Finally, effect of the EE-2 polymer on the stability was demonstrated by increasing the stability value by about 52%