Hafnium-based Ferroelectric Field-Effect Transistors (FeFETs) suffer from limited endurance. In-depth understanding of the trap behaviour during failure process is crucial for endurance improvement. In this work, aiming at the characteristics of FeFETs, Trap Spectroscopy by Charge Injection and Sensing (TSCIS) technique is optimized and an advanced trap characterization platform based on newly optimized TSCIS method combined with Low Frequency Noise (LFN) and C-V characteristics for resolving spatial and energetic distribution of traps in FeFETs is developed. Furthermore, through this advanced trap characterization platform, the trap behaviours of nitridation/non-nitridation FeFETs during endurance process are characterized and compared in detail. The improvement of interface quality by nitridation is finally confirmed from the defect level.
5 October 2021 in IEEE Transactions on Electron Devices
We study the impact of different interlayers (ILs) and ferroelectric materials on charge trapping during the endurance fatigue of Si ferroelectric field effect transistor (FeFET) with TiN/Hf x Zr 1-x O 2 / interlayer/Si (MFIS) gate-stack. We have fabricated FeFET devices with different interlayers (SiO 2 or SiON) and Hf x Zr 1-x O 2 materials ( ${x} =0.75$ , 0.6, 0.5) and directly extracted the charge trapping during endurance fatigue. We find that: 1) under the same equivalent oxide thickness (EOT) condition, the increase of dielectric constant and interlayer thickness suppresses charge trapping and improves the endurance characteristics; 2) charge trapping effect is experimentally verified to be the origin of endurance fatigue; and 3) as the spontaneous polarization ( ${P}_{\text {s}}{)}$ of the Hf x Zr 1-x O 2 decreases from $25.9~ \boldsymbol {\mu } \text{C}$ /cm 2 (Hf 0.5 Zr 0.5 O 2 ) to $20.3~ \boldsymbol {\mu } \text{C}$ /cm 2 (Hf 0.6 Zr 0.4 O 2 ), the charge trapping behavior decreases, resulting in the slow degradation rate of memory window (MW) during program/erase cycling; in addition, when ${P}_{\text {s}}$ further decreases to $8.1~ \boldsymbol {\mu }\text{C}$ /cm 2 (Hf 0.75 Zr 0.25 O 2 ), the initial MW nearly disappears (only ~0.02 V). Thus, the reduction of ${P}_{\text {s}}$ could improve endurance characteristics. On the contrary, it can also reduce the MW. Our work helps design the MFIS gate-stack to improve endurance characteristics.
17 January 2022 in IEEE Transactions on Electron Devices
We investigate the charge trapping during endurance fatigue of FeFET with TiN/Hf 0.5 Zr 0.5 O 2 /SiO 2 /Si (MFIS) gate structure. We propose a method of experimentally extracting the number of trapped charges during the memory operation, by measuring the charges in the metal gate and Si substrate. We verify that the amount of trapped charges increases during the endurance fatigue process. This is the first time that the trapped charges are directly experimentally extracted and verified to increase during endurance fatigue. Moreover, we model the interplay between the trapped charges and ferroelectric polarization switching during endurance fatigue. Through the consistency of experimental results and simulated data, we demonstrate that as the memory window (MW) decreases: 1) the ferroelectric characteristic of Hf 0.5 Zr 0.5 O 2 is not degraded; 2) the trap density in the upper bandgap of the gate stacks increases; and 3) the reason for MW decrease is increased trapped electrons after program operation but not related to hole trapping/detrapping. Our work is helpful to study the charge trapping behavior of FeFET and the related endurance fatigue process.
In this work, we demonstrate the enlargement of the memory window of Si channel FeFET with ferroelectric Hf 0.5 Zr 0.5 O 2 by gate-side dielectric interlayer engineering. By inserting a 3 nm Al 2 O 3 dielectric interlayer between TiN gate metal and ferroelectric Hf 0.5 Zr 0.5 O 2 , we achieve a memory window of 4.1 V with endurance of ~10 4 cycles and retention over 10 years. The physical origin of memory window enlargement is clarified to be charge trapping at the Al 2 O 3 /Hf 0.5 Zr 0.5 O 2 interface, which has an opposite charge polarity to the trapped charges at the Hf 0.5 Zr 0.5 O 2 /SiO x interface.
The nitridation process can significantly improve the quality of the interfacial layer and suppress the unrecoverable electron trapping of the interfacial states during cycling, which is the main cause of endurance enhancement. In this work, through in-depth analysis of defect behavior during memory window (MW) degradation in ferroelectric field effect transistors (FeFETs), it is found that the degradation of FeFET devices with SiON interfacial layer starts within the HZO layer, while the degradation process of FeFET devices with SiO2 interlayer initially begins at the interlayer and then penetrates into the HZO layer. First, the MW degradation processes of nitridation/non-nitridation devices are measured and compared. Moreover, through the extended measure-stress-measure method, three types of defects are defined and the defect behaviors including trapping kinetics and energy locations during degradation are systematically investigated. The mechanism of nitrogen on the endurance enhancement is finally revealed. These results are valuable to better understand the reliability issues of FeFET and pave the way for future process optimization.
Reservoir computing (RC) is a low-cost and temporary-signal friendly computational framework, whose hardware implementation is hindered by integrating huge amounts and various kinds of devices. Benefitted from the logic in memory (LIM) capability, the process compatible Hf 0.5 Zr 0.5 O 2 (HZO)-based ferroelectric field-effect-transistor (FeFET) is a promising candidate for implementing artificial networks. In this letter, a fully FeFETs RC network is proposed. Multiple functions can be achieved in a single device owing to its intrinsic characteristics, and the richness of virtual nodes is largely enhanced through full-connection structures. Impressively, only 44 FeFETs are required to construct a compact RC network with 100 ns operating speed and high accuracy in classification tasks. This paves the way to develop the high energy-efficiency FeFET RC networks.