Hadi AL-agele

Dr. Hadi AL-agele

Water resource Engineering- Oregon State University
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
KPKyle W Proctor
Kyle W Proctor
GMGanti Murthy
Ganti Murthy
HCHiggins Chad
Higgins Chad
The challenge of meeting growing food and energy demand while also mitigating climate change drives the development and adoption of renewable technologies ad approaches. Agrivoltaic systems are an approach that allows for both agricultural and electrical production on the same land area. These systems have the potential to reduced water demand and increase the overall water productivity of certain crops. We observed the microclimate and growth characteristics of Tomato plants (Solanum lycopersicon var. Legend) grown within three locations on an Agrivoltaic field (control, interrow, and below panels) and with two different irrigation treatments (full and deficit). Total crop yield was highest in the control fully irrigated areas a, b (88.42 kg/row, 68.13 kg/row), and decreased as shading increased, row full irrigated areas a, b had 53.59 kg/row, 32.76 kg/row, panel full irrigated areas a, b had (33.61 kg/row, 21.64 kg/row). Water productivity in the interrow deficit treatments was 53.98 kg/m3 greater than the control deficit, and 24.21 kg/m3 greater than the panel deficit, respectively. These results indicate the potential of Agrivoltaic systems to improve water productivity even for crops that are traditionally considered shade-intolerant.

13 April 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
LNLloyd Nackley
Lloyd Nackley
HCHiggins Chad
Higgins Chad
Expanding populations, the impacts of climate change, availability of arable land, and availability of water for irrigation collectively strain the agricultural system. To keep pace and adapt to these challenges, food producers may adopt unsustainable practices that may ultimately intensify the strain. What is a course of technological evolution and adoption that can break this cycle? In this paper we explore a set of technologies and food production scenarios with a new, reduced-order model. First the model is developed. The model combines limitations in the sustainable water supply, agricultural productivity as a function of intensification, and rising food demands. Model inputs are derived from the literature and historical records. Monte Carlo simulation runs of the model are used to explore the potential of existing and future technologies to bring us ever closer to a more sustainable future instead of ever farther. This is the concept of a moving sustainability horizon (the year in the future where sustainability can be achieved with current technological progress if demand remains constant). The sustainability gap is the number of years between the present and the sustainability horizon. As demand increases, the sustainability horizon moves farther into the future. As technology improves and productivity increases, the sustainability horizon is closer to the present. Sustainability, therefore, is achieved when the sustainability horizon collides with the present, closing the sustainability gap to zero. We find one pathway for water management technology adoption and innovation that closes the sustainability gap within the reduced-order model’s outputs. In this scenario, micro-irrigation adoption, minimal climate change impacts, reduced food waste, and additional transformative innovations such as smart greenhouses and agrivoltaic systems are collectively needed. The model shows that, in the absence of these changes, and continuing along our current course, the productivity of the agricultural system would become insufficient in the decade following 2050.

8 December 2021 in Agronomy
Verified
Journal Article
Open access
PDF file
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
HJHisham Jashami
Hisham Jashami
LNLloyd Nackley
Lloyd Nackley
HCHiggins Chad
Higgins Chad
A new Variable Rate Drip Irrigation (VRDI) emitter that monitors individual water drops was designed, built, and tested. This new emitter controllers water application directly by monitoring the volume applied in contrast to uniform drip irrigation systems that control water application indirectly by pressure compensation and operational times. Prior approaches assumed irrigation volumes based on flow rates and time and typically did not verify the applied amount of water applied at each water outlet. The new VRDI emitter self-monitors the total volume of water applied and halts the flow once the desired total water application has been achieved. This study performed a test for a new VRDI emitter design with two inner diameters of 0.11 cm and 0.12 cm and two outer diameters 0.3 cm and 0.35 cm compared to a commercial drip emitter. Laboratory tests verify that the integrated volume measurements of the VRDI system are independent of pressure. Conversely, the flow rates of the commercial pressure-compensated drip lines were not independent of pressure. These results demonstrate that this form of VRDI is technically feasible and is shown to be energy efficient, requiring lower system operating pressures than pressure-compensated lines. The VRDI system can reduce water consumption and related water costs.

7 July 2025 in Frontiers in Horticulture
Verified
Journal Article
Open access
PDF file
IWIsraa M. T. Witwit
Israa M. T. Witwit
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
CHChad W. Higgins
Chad W. Higgins
Integrating innovative technologies such as agrivoltaic systems, improving water use efficiency, and adopting climate-smart agricultural practices can help ensure that farming systems are resilient, resource-efficient, and capable of feeding future generations. This study aims to investigate the growth of potato plants both beneath and between simulated solar panels, as well as in a control area. The effects of two levels of deficit irrigation (35% and 50%) and three levels of potassium sulfate fertilizer are examined. Total yield, water productivity, and nutrient analysis of the plants, potatoes, and soil are conducted. The results show that light conditions are the most significant factor (more than irrigation or fertilizer) for most observations. The results show that light conditions are the most important factor (more so than irrigation or fertilizers), with total yields higher (277.9 kg or more than 17 t/ha) at irrigation level (I0.35) and (241.4 kg or more than 15 t/ha) at irrigation level (I0.5) in the partially shaded areas between the solar panels marked as (B). In contrast, the total yield in the light areas (L) was (253.1 kg or more than 16 t/ha) at irrigation level (I0.35) and (232.3 kg or more than 14 t/ha) at irrigation level (I0.5), while the yield in shaded areas (S) was (204.8 kg or more than 13 t/ha) at irrigation level (I0.35) and (191.45 kg or more than 12 t/ha) at irrigation level (I0.5). The decrease in total production in the shade was 26% at irrigation level (I0.35) and 20% at irrigation level (I0.5) compared to the partial-shade area, and 19% at irrigation level (I0.35) and 18% at irrigation level (I0.5) compared to the light area. The results of water consumption (added water) indicated that the amount of water added to plants growing in shade was significantly less than that of plants in partial shade and light at both irrigation levels. The amount of added water in the shade was 3833 m3/ha at irrigation level (I0.35) and 3517 m3/ha at irrigation level (I0.5). In partial shade, it was 3883 m3/ha at irrigation level (I0.35) and 3585 m3/ha at irrigation level (I0.5). In light conditions, it was 3903 m3/ha at irrigation level (I0.35) and 3607 m3/ha at irrigation level (I0.5). The results indicated that water productivity in partial shade and light conditions differed significantly from that of shaded plants at both irrigation levels. Water productivity values in partial shade were recorded at 4.42 kg/m3 at irrigation level (I0.35) and 4.16 kg/m3 at irrigation level (I0.5). Under light conditions, water productivity values measured 4.00 kg/m³ at irrigation level (I0.35) and 3.98 kg/m3 at irrigation level (I0.5). In the shade, water productivity values were 3.30 kg/m3 at irrigation level (I0.35) and 3.36 kg/m3 at irrigation level (I0.5). The increase in water productivity in the interpanel areas suggests that the combination of shading and irrigation contributed to water conservation and reduced evaporation, leading to more efficient water use without compromising overall production. The combination of full shade, 35% irrigation deficit, and low potassium enhances available phosphorus and decreases potassium concentrations in the soil. The discovery that agrivoltaic systems can support healthier soil nutrient dynamics through shading and deficit irrigation is a promising area for future research into sustainable farming practices.

20 January 2021 in Agriculture
Verified
Journal Article
Open access
PDF file
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
LNLloyd Nackley
Lloyd Nackley
HCHiggins Chad
Higgins Chad
This research presents a new variable rate drip irrigation (VRDI) emitter design that can monitor individual water drops. Conventional drip systems cannot monitor the individual water flow rate per emitter. Application uniformity for conventional drip emitters can be decreased by clogged emitters, irregular emitter orifices, and decreases in pressure. A VRDI emitter can overcome the irrigation challenges in the field by increasing water application uniformity for each plant and reducing water losses. Flow rate is affected by the diameter of the delivery pipe and the pressure of the irrigation delivery system. This study compares the volumetric water flow rate for conventional drip emitters and new VRDI emitters with variable diameters inner (1 mm, 1.2 mm, 1.4 mm, and 1.6 mm) and outside (3 mm, 3.5 mm, 4 mm, and 4.5 mm) with three pressures (34 kPa, 69 kPa, and 103 kPa). The tests revealed that the new VRDI emitter had flow rates that increased as the operating pressure increased similar to a conventional drip tube. The flow rate was slightly increased in the VRDI with pressure, but even this increase did not show large changes in the flow rate. The flow rate of the conventional drip tube was 88% larger than the VRDI emitter for all pressures (p < 0.05). However, operating pressure did not affect the drop sizes at the VRDI emitter, but the generalized linear mixed models (GLM) results show that volume per drop was impacted by the outside diameter of the VRDI outlet (p < 0.05). The interaction between the inner and outside diameter was also significant at p < 0.01, and the interaction between outside diameter and pressure was statistically significant at p < 0.01. The electronic components used to control our VRDI emitter are readily compatible with off-the-shelf data telemetry solutions; thus, each emitter could be controlled remotely and relay data to a centralized data repository or decision-maker, and a plurality of these emitters could be used to enable full-field scale VRDI.

1 January 2020 in Applied Engineering in Agriculture
Verified
Journal Article
Closed access
PDF file
Hadi AL-ageleHadi AL-agele
Hadi AL-agele
DMD. M. Mahapatra
D. M. Mahapatra
CPClarence Prestwich
Clarence Prestwich
CHChad W Higgins
Chad W Higgins
: This study assesses the potential of dynamic nozzle height adjustment for overhead irrigation systems. This system would maintain the nozzle or emitter a constant distance above the crop canopy throughout the growing season and would dynamically respond to variability in canopy height across the field. Within such systems, nozzle height would no longer be fixed in space and time. Nozzle heights would instead vary across space and time. This dynamic system response may therefore have adverse impacts on water application uniformity. The impact of DESA on application uniformity was assessed in three steps. First, changes in individual sprinkler patterns for pressure, nozzle type, flow rate, and nozzle height were measured in controlled experiments. Next, parametrized equations of the individual sprinkler patterns and how they are altered by nozzle height are developed. Next, the Center Pivot Evaluation and Design software was used to simulate theoretical uniformity, and these simulations were tested against field measurements of the coefficient of uniformity. Finally, we use the parameterized equations within the Center Pivot Evaluation and Design software to simulate the coefficient of uniformity for pivots with constant nozzle heights with a random distribution of nozzle heights, which simulate a dynamic elevation system. It was found that the uniformity coefficient decreased by 4-6% as the distribution of heights throughout the pivot become more variable, due to localized dynamic height adjustment. Systems equipped with nozzles with triangular spray patterns were less impacted than systems equipped with nozzles with elliptical spray patterns. Keywords: Keyword. Center pivot, Center Pivot Elevation and Design (CPED), Nozzle height, Sensor, Sprinkler pattern, Uniformity coefficient.