The Friction Stir Welding process has become very popular because it produces good welds with low defects and distortion. However, FSW in thick aluminium alloy plate joints such as those found in applications in the transportation industry such as automotive, rail, shipbuilding, and aircraft is more complex and challenging. Double-sided FSW has challenges to be developed and applied in the transportation industry. This study investigates the effect of different tool rotational speeds on the double-sided FSW of Aluminium Alloy 6061-T6 thick plate. The ratios of the tool speed differences studied were 1:1, 1:1.3, and 1:1.6. Tensile strength, hardness, microstructure evolution, and fracture morphology were studied in this study. The investigation results concluded that an efficient and reliable double-sided FSW joint was achieved at joints with a tool rotational speed difference ratio of 1:1.
The sea toll allows the formation of marine tourism transportation, such as a floatplane to be developed in the Indonesian Archipelago Region. This research dev
30 April 2024 in International Review of Aerospace Engineering (IREASE)
Most seaplanes used for aircraft operations in territorial waters are classified into three main types, namely floatplanes, flying boats, and amphibians. Among these, the floatplane stands out as it replaced its landing gear with two floating pontoons, known as the catamaran floater, on which the fuselage rests. Therefore, this research presented a data article on resistance testing to predict force and moment along the x, y, and z axes for a 1:10 scale model of the catamaran floater. Test data encompassed variations in trim angles 0°, −1°, and −2°, and speed ranging from 1 to 6 m/s. The results of the resistance testing are presented in the form of descriptive statistics and shown through two graphs. The first graph described the relationship between the catamaran floater's speed and the corresponding force generated. The second graph illustrated the correlation between the catamaran floater's speed and moment generated.