The use of propeller boss cap fins (PBCF) on open B-series propeller have been known to reduce wake effect behind the propeller thus increase torque and thrust of propeller, whilst the use of Kaplan-series propeller is successful to improve the quality of flow around the propeller blades hence increase the propeller efficiency. The current work is carried out to investigate the effect of combining PBCF and ducted on B-series and Kaplan-series propellers to discover further advantages of using the two types of energy saving device (ESD) tools. The study is carried out numerically using computational fluid dynamics (CFD) approach which is based on Reynolds-averaged Navier-Stokes Equations (RANSE) together with the use of k-epsilon turbulence modelling. Overall results show that the use of Kaplan-series with combination ducted and PBCF can even further improve the thrust, torque, and efficiency of propeller.
There are many ways that ship designers can do to get the minimum engine power with the desire ship speed. One of the ways is to design the bow shape with the aim of minimizing ship resistance. In this study, the ship resistance of hard-chine monohull with two different bow shapes that conventional and inverted bows are analyzed. CFD (Computational Fluid Dynamics) approach by using Shear Stress Transport (SST) as turbulence model is used. Different ship speed by Froude numbers Fr 0.2 to 0.7 is applied. The simulation results give convincing evidence that the inverted bow produces lower total resistance compared to the conventional one by about 5% reduction
The sea toll allows the formation of marine tourism transportation, such as a floatplane to be developed in the Indonesian Archipelago Region. This research dev
1 January 2021 in IOP Conference Series: Materials Science and Engineering
Search and rescue operations, especially in ship accidents, require speed and reliability from the rescue vessels in facing the challenges of extreme weather and sea waves. A rescue boat hydrodynamic performance study is very important to be carried out in order to determine the ship’s ability to withstand dangerous conditions while in operation. A combination of using Maxsurf and CFD method are implemented to estimate the resistance of 3 (three) selected designs of crew boat, which demonstrated a good agreement between the two techniques. Selection of the final design also uses seakeeping criteria, i.e. having lower pitching and rolling responses. The final model is further tested in a towing tank belongs to the Institut Teknologi Sepuluh Nopember (ITS) and agrees well with Maxsurf and CFD calculation.
25 October 2021 in Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
There has recently been a surge in demand for multi-hull vessels for military and commercial purposes. The need for multi-hull ships increase from the necessity to balance speed and cargo requirements. Among others, the trimaran is one such hull type. The current study performs a CFD resistance analysis for trimaran as a parameter range of feasible hull forms based on the NPL systematic series. The resistance of trimaran hull shapes are calculated using CFXTM, a commercial CFD code that belongs to ANSYS. The trimaran model was tested at one fixed transverse separation (S/L=0.2) together with 3 longitudinal separations, R/L=0, 0.25, and 0.5, at different Froude numbers (based on length) from 0.2 to 0.6. Testing on the individual hull is also carried out to quantify the effect of resistance interference on the trimaran configuration. The CFD simulation results indicate that the trimaran model with side hulls parallel to the stern (R/L=0) has the least resistance. The interference effect of resistance on Trimaran with R/L=0, 0.25, 0.5 are 2.8%, 4.6%, 6.8% as opposed to non-interference trimaran model, respectively. These findings provide an approach for appropriately selecting the trimaran model with longitudinal side hull configurations.
Remotely operated (underwater) vehicles, commonly known as ROVs, have a wide range of uses in the marine industry, including maintenance and repair. The research examines ROV pressure and resistance, is less likely at the present time. Furthermore, the design and operation of this remotely operated vehicle (ROV) rely heavily on accurate measurements of hydrodynamic loads. Computational Fluids Dynamic (CFD) technique makes it possible to obtain an accurate estimate of the forces that are being applied by the flow around the ROV hull. In this paper, an investigation of the resistance and pressure that the ROV experiences when on the surface and while submerged to a depth of 100 meters is presented. In addition, ROV was evaluated at several speeds, ranging from 0.5 to 1.5 metres per second. The speed of the ROV that is being evaluated will increase when significant impediments are introduced into the environment. This flips the direction of the pressure that is applied to the ROV hull. The CFD approach demonstrates the resistance that is generated on the ROV hull is, for the most part, affected by the speed at which it is moving. In free surface conditions, the average increase in resistance was 78.91%, and in submerged conditions, it was 74.24%. Nevertheless, the variation in test depth is where the main impact of the pressure value can be seen in the CFD simulation. Simulations conducted on the free surface indicate that the pressure on the ROV hull is about 1x10-3 kPa, whereas simulations conducted at a depth of 100 metres below the sea surface indicate that the pressure is approximately 972 kPa