The sea toll allows the formation of marine tourism transportation, such as a floatplane to be developed in the Indonesian Archipelago Region. This research dev
Most seaplanes used for aircraft operations in territorial waters are classified into three main types, namely floatplanes, flying boats, and amphibians. Among these, the floatplane stands out as it replaced its landing gear with two floating pontoons, known as the catamaran floater, on which the fuselage rests. Therefore, this research presented a data article on resistance testing to predict force and moment along the x, y, and z axes for a 1:10 scale model of the catamaran floater. Test data encompassed variations in trim angles 0°, −1°, and −2°, and speed ranging from 1 to 6 m/s. The results of the resistance testing are presented in the form of descriptive statistics and shown through two graphs. The first graph described the relationship between the catamaran floater's speed and the corresponding force generated. The second graph illustrated the correlation between the catamaran floater's speed and moment generated.
17 June 2020 in Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
The Wind tunnel investigation of a slender body catamaran was conducted in order to determine its resistance characteristics, namely the effect of pressure and flow velocity changes for varied hull separation. The catamaran was tested in a wind tunnel belongs to Department of Mechanical Engineering, ITS, with hull separations of S/L = 0.2 to 0.4 and variation in Reynolds numbers up to 4.46 x 105. Pressure around the hull was measured using pressure tappings and the flow velocity behind the hull was also measured using a Pitôt-static tube. The experimental study shows that the pressure coefficient decreases when the hull separation declines and conversely, the flow velocity increases. The tests demonstrated a viscous interaction between the hulls, and form factors for the monohull and catamaran are derived. The demihull exhibited a form factor (1+k) of 1.265 and in the catamaran mode, the measured form factor (1+βk) was between 1.416 and 1.403. The results are in agreement with other published data.
It is well known that seaplanes have twin floaters. Therefore, it is necessary to conduct a wind tunnel test that aims to determine the performance of twin floaters paired on a mock aircraft model. The twin floaters use the same scale as the mock aircraft, which is 1:6.3 with a length of 1555 mm and a distance between floaters of 668.8 mm or S/L of 0.43. The test plan uses a speed of 65 m s-1 and a Reynolds number 1.5 times the model configuration with flap angle variations of 0°, 10°, 18°, 30°, and 40°. The final test results showed that tabulations and graphs of lift coefficient (CL), drag coefficient (CD), and pitching moment coefficient (CM) with angle of attack (α) variations of −10° to 16°.