Igor Baraia-Etxaburu

Dr. Igor Baraia-Etxaburu

mondragon unibertsitatea
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2023 in IEEE Access
Verified
Journal Article
Open access
AUAnder Udabe
Ander Udabe
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
DGDavid Garrido
David Garrido
Wide Bandgap (WBG) semiconductor materials present promising electrical and thermal characteristics for Power Electronics applications. This WBG devices make possible the development of more efficient converters with higher power densities. In contrast to Silicon Carbide (SiC) devices, Gallium Nitride (GaN) devices are several steps behind in terms of development, standardization and achievable power levels. This makes more challenging the use and integration of these devices in real power applications. Commercially available current Power GaN devices are based on lateral normally ON HEMT transistors. In order to get normally OFF power transistors, two transistor structures have been proposed: enhancement mode (e-mode) and hybrid transistors. Current E-mode transistors present a low gate threshold voltage which could lead to crosstalk problems. In contrast, hybrid transistors have higher gate threshold voltages, however, the use of a Silicon MOSFET in their structure limits their performance. The lack of a standard power GaN device makes difficult the adoption of these promising devices by the industry. Thus, in order to make easier the adoption of these power GaN devices, this paper presents a State of the Art of power Gallium Nitride devices focusing on their structures, basics and gate terminal requirements.

1 May 2017
Verified
Conference Paper
Closed access
DGDavid Garrido
David Garrido
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
Power electronic converters use semiconductors to satisfy the needs of different applications. Nowadays, these semiconductors are mainly based on Silicon (Si), which can be processed virtually without defects. However, the limits of Si are being reached and in consequence, Si based semiconductors have limited voltage blocking capability, limited heat transfer capability, limited efficiency and maximum junction temperature. In recent years, power semiconductor devices have been built with wide-bandgap materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN). The use of these materials promises to surpass the limits imposed by Si. More compact and efficient devices can be fabricated with these materials. However, in order to exploit the benefits of these devices, is necessary to know all the implications that the adoption of these new components has in the converter. This paper provides a review of current SiC and GaN materials and devices comparing their benefits and drawbacks for real power applications.

21 June 2019 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DGDavid Garrido
David Garrido
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
JAJoseba Arza
Joseba Arza
MBManex Barrenetxea
Manex Barrenetxea
The measurement of fast voltage and current transients of SiC devices requires high bandwidth probes. Commercially available voltage and current probes can be expensive and in addition, the delay introduced by them must be compensated to achieve a proper time alignment (de-skew). Determining this de-skewing value is not a trivial task. In this paper, a simple and affordable measurement method is presented for the simultaneous measurement of the voltage and current transients of SiC devices. The voltage is measured by means of a high bandwidth RC attenuator while the current is estimated from the voltage drop in the stray inductance of the switching loop. Since both voltages are measured with two equal and matched high bandwidth passive voltage probes there is no need to apply any deskew. This is one of the most important advantages of the method. The presented method is experimentally evaluated and used for the estimation of energy switching losses in the tested SiC - MOSFET.

1 May 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
MMMikel Mazuela
Mikel Mazuela
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
Alain Sanchez-RuizAlain Sanchez-Ruiz
Alain Sanchez-Ruiz
IEIvan Echeverria
Ivan Echeverria
ITInigo Torre
Inigo Torre
IAInigo Atutxa
Inigo Atutxa
This paper presents a solution for the voltage balance problem of the series-connected devices that can be applied to multilevel converters in which the series-connected devices need to block twice their switched voltage. The solution is based on two ideas, the control of the switching commands to achieve proper switching losses balance and the use of additional circuitry to achieve proper voltage balance during their blocking state. The proposed strategy is experimentally validated into a 5-level multipoint clamped full-scale converter. However, it can be used in any other converter topology in which the devices need to block twice their switched voltage.

29 August 2019 in Electronics
Verified
Journal Article
Open access
PDF file
LTLukas Tapia
Lukas Tapia
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
JVJuan Jose Valera
Juan Jose Valera
Alain Sanchez-RuizAlain Sanchez-Ruiz
Alain Sanchez-Ruiz
GAGonzalo Abad
Gonzalo Abad
Electric propulsion and integrated hybrid power systems can improve the energy efficiency and fuel consumption of different kinds of vessels. If the vessel power system is based on DC grid distribution, some benefits such as higher generator efficiency and lower volume and cost can be achieved. However, some challenges remain in terms of protection devices for this kind of DC grid-based power system. The absence of natural zero crossing in the DC current together with the fast and programmable breaking times required make it challenging. There are several papers related to DC breaker topologies and their role in DC grids; however, it is not easy to find comprehensive information about the design process of the DC breaker itself. In this paper, the basis for the design of a DC solid-state circuit breaker (SSCB) for low voltage vessel DC grids is presented. The proposed SSCB full-scale prototype detects and opens the fault in less than 3 µs. This paper includes theoretical analyses, design guidelines, modeling and simulation, and experimental results.

25 November 2022 in Electronics
Verified
Journal Article
Open access
PDF file
JOJavier Oyarzun
Javier Oyarzun
IAIosu Aizpuru
Iosu Aizpuru
IBIgor Baraia-Etxaburu
Igor Baraia-Etxaburu
In the context of recent decades in which there has been great development in power electronics systems with increasingly better operating characteristics, the study of the factors that affect the behaviour of these systems in terms of electromagnetic interference (EMI) is mandatory. Within this general perspective, it is essential to know the time and frequency characteristics of the switching signals, as they are the main sources of EMI noise. This work analyses the suitability of different spectral analysis techniques, specifically short-time Fourier transform (STFT) and continuous wavelet transform (CWT), to extract the frequency characteristics of the switching signals of a converter. Thus, a test bench based on a half-bridge was designed as a preliminary step in the development of a model of noise generators. After the analysis of the main parameters of these techniques, a comparison of the results obtained was carried out. It was concluded that both techniques are considered valid and complementary; not only that, but they overcome some limitations of the fast Fourier transform (FFT) as they offer the possibility of determining which are the frequency components associated with different types of events occurring at different times.