22 April 2020 in Journal of Lightwave Technology
Fiber-optic multi-band transmission (MBT) aims at exploiting the low-loss spectral windows of single-mode fibers (SMFs) for data transport, expanding by ~11 times the available bandwidth of C-band line systems and by ~5 times C+L-band line systems'. MBT offers a high potential for cost-efficient throughput upgrades of optical networks, even in absence of available dark-fibers, as it utilizes more efficiently the existing infrastructures. This represents the main advantage compared to approaches such as multi-mode/-core fibers or spatial division multiplexing. Furthermore, the industrial trend is clear: the first commercial C+L-band systems are entering the market and research has moved toward the neighboring S-band. This article discusses the potential and challenges of MBT covering the ITU-T optical bands O -> L. MBT performance is assessed by addressing the generalized SNR (GSNR) including both the linear and nonlinear fiber propagation effects. Nonlinear fiber propagation is taken into account by computing the generated nonlinear interference by using the generalized Gaussian-noise (GGN) model, which includes the interaction of nonlinear fiber propagation with stimulated Raman scattering (SRS), and in general considers wavelength-dependent fiber parameters. For linear effects, we hypothesize typical components' figures and discussion on components' limitations, such as transceivers', amplifiers' and filters' are not part of this work. We focus on assessing the transmission throughput that is realistic to achieve by using feasible multi-band components without specific optimizations and implementation discussion. So, results are meant to address the potential throughput scaling by turning-on excess fiber transmission bands. As transmission fiber, we focus exclusively on the ITU-T G.652.D, since it is the most widely deployed fiber type worldwide and the mostly suitable to multi-band transmission, thanks to its ultra-wide low-loss single-mode high-dispersion spectral region. Similar analyses could be carried out for other single-mode fiber types. We estimate a total single-fiber throughput of 450 Tb/s over a distance of 50 km and 220 Tb/s over regional distances of 600 km: ~10 times and 8 times more than C-band transmission respectively and ~2.5 times more than full C+L.
24 March 2022 in Journal of Lightwave Technology
We investigate quality of transmission (QoT) estimation in a multi-band transmission scenario, including a wideband description of the frequency-dependent physical layer parameters and a disaggregated QoT estimation approach.In particular, we use experimentally-derived erbium- and thulium-doped fiber amplifier operational data, and simulate the generation of the nonlinear interference (NLI) noise by comparing implementations of the split-step Fourier method, the generalized Gaussian noise (GGN) model implemented in the open-source GNPy library, and an efficient approximation that provides accurate results in a limited computational time. The latter semi-analytical solution is obtained by approaching the Manakov equation from a disaggregated standpoint, including the power transfer induced by stimulated Raman scattering, along with the frequency-dependent evolution of the fiber parameters of loss, dispersion and the nonlinearity coefficient. We validate the proposed approximation within a C+L+S 400 G transmission scenario and investigate 21 channels under test that are equally spaced along the three bands.
14 February 2020 in Journal of Optical Communications and Networking
The reduction of system margin in open optical line systems (OLSs) requires the capability to predict the quality of transmission (QoT) within them. This quantity is given by the generalized signal-to-noise ratio (GSNR), including both the effects of amplified spontaneous emission (ASE) noise and nonlinear interference accumulation. Among these, estimating the ASE noise is the most challenging task due to the spectrally resolved working point of the erbium-doped fiber amplifiers (EDFAs), which depend on the spectral load, given the overall gain profile. An accurate GSNR estimation enables control of the power optimization and the possibility to automatically deploy lightpaths with a minimum margin in a reliable manner. We suppose an agnostic operation of the OLS, meaning that the EDFAs are operated as black boxes and rely only on telemetry data from the optical channel monitor at the end of the OLS. We acquire an experimental data set from an OLS made of 11 EDFAs and show that, without any knowledge of the system characteristics, an average extra margin of 2.28 dB is necessary to maintain a conservative threshold of QoT. Following this, we applied deep neural network machine-learning techniques, demonstrating a reduction in the needed margin average down to 0.15 dB.
23 June 2023 in IEEE Transactions on Network and Service Management
Optical communications and networking are fast becoming the solution to support ever-increasing data traffic across all segments of the network, expanding from core/metro networks to 5G/6G front-hauling. Therefore, optical networks need to evolve towards an efficient exploitation of the infrastructure by overcoming the closed and aggregated paradigm, to enable apparatus sharing together with the slicing and separation of the optical data plane from the optical control. In addition to the advantages in terms of efficiency and cost reduction, this evolution will increase network reliability, also allowing for a fine trade-off between robustness and maximum capacity exploitation. In this work, an optical network architecture is presented based on the physical layer digital twin of the optical transport used within a multi-layer hierarchical control operated by an intent-based network operating system. An experimental proof of concept is performed on a three-node network including up to 1000 km optical transmission, open re-configurable optical add & drop multiplexers (ROADMs) and whitebox transponders hosting pluggable multirate transceivers. The proposed solution is based on GNPy as the optical physical layer digital twin and ONOS as intent-based network operating system. The reliability of the optical control decoupled by the data plane functioning is experimentally demonstrated exploiting GNPy as open lightpath computation engine and software optical amplifier models derived from the component characterization. Besides the lightpath deployment exploiting the modulation format evaluation given a generic traffic request, the architecture reliability is tested mimicking the use case of an automatic failure recovery from a fiber cut.
10 February 2021 in Journal of Optical Communications and Networking
Precise computation of the quality of transmission (QoT) of lightpaths (LPs) in transparent optical networks has techno-economic importance for any network operator. The QoT metric of LPs is defined by the generalized signal-to-noise ratio (GSNR), which includes the effects of both amplified spontaneous emission noise and nonlinear interference accumulation. Generally, the physical layer of a network is characterized by nominal values provided by vendors for the operational parameters of each network element (NE). Typically, NEs suffer a variation in the working point that implies an uncertainty from the nominal value, which creates uncertainty in the GSNR computation and requires the deployment of a system margin. We propose the use of a machine learning agent trained on a dataset from an in-service network to reduce the uncertainty in the GSNR computation on an unused sister network, based on the same optical transport equipment and thus following the transfer learning paradigm. We synthetically generate datasets for both networks using the open-source library GNPy and show how the proposed deep neural network based on TensorFlow may substantially reduce the GSNR uncertainty and, consequently, the needed margin. We also present a statistical analysis of the observed GSNR fluctuations, showing that the per-wavelength GSNR distribution is always well-approximated as Gaussian, enabling a statistical closed-form approach to the margin setting.
27 May 2021 in Journal of Optical Communications and Networking
In the direction of disaggregated and cognitive optical networks, this work proposes and experimentally tests a vendor-agnostic optical line controller architecture capable of autonomously setting the working point of optical amplifiers to maximize the capacity of a ROADM-to-ROADM (reconfigurable optical add–drop multiplexer) link. From a procedural point of view, once the equipment is installed, the presented software framework performs an automatic characterization of the line, span by span, to abstract the properties of the physical layer. This process requires the exploitation of monitoring devices such as optical channel monitors and optical time domain reflectometers, available, in a future perspective, in each amplification site. On the basis of this information, an optimization algorithm determines the working point of each amplifier to maximize the quality of transmission (QoT) over the entire band. The optical line controller has been experimentally tested in the laboratory using two different control strategies, achieving in both cases a homogeneous QoT for each channel close to the maximum average and an excellent match with respect to emulation results. In this framework, the Gaussian noise simulation in Python (GNPy) open source Python library is used as the physical model for optical propagation through the fiber, and the covariance matrix adaptation evolution strategy is used as an optimization algorithm to identify properties of each fiber span and to maximize the link capacity.