An innovative metal–organic framework (ZnMOF-BTA) with corrosion inhibition properties was prepared by the solvothermal reaction of zinc nitrate, 1,2,3-benzotriazole, and 2,5-thiophene dicarboxylic acid. ZnMOF-BTA was characterized by FTIR, XRD, XPS, SEM, and thermogravimetric analyses, and the corrosion inhibition performance on Q235 carbon steel in 1 M HCl solution was evaluated by weight loss, polarization, and EIS measurements. XRD results showed that ZnMOF-BTA has a monoclinic crystal structure and belongs to C12/c1 space group, while DTA/TGA results revealed it has a good crystalline quality and excellent thermal stability with a melting point of 410 °C. FTIR and XPS results revealed that Zn2+, TDC2−, and BTA molecules were successfully used in ZnMOF-BTA synthesis. Electrochemical test results show that the obtained ZnMOF-BTA is effective in corrosion inhibition of Q235 carbon steel in acidic conditions and maximum inhibition efficiency of over 90% is obtained at 6 wt.% ZnMOF-BTA extract concentration. Adsorption studies revealed that the adsorption of BTA molecules follows the Langmuir isotherm model with an R2 value of 0.97889, while the ΔG◦ads value of −10.28 kJ mol−1 indicates that adsorption is by physisorption. The study provides a new corrosion inhibitor compound with proven corrosion inhibition properties.
The cold galvanizing coatings (CGCs) are used to repair old hot-dip galvanized steel (HDG) in numerous anticorrosion engineering, but poor adhesion of the CGC restricts its large-scale applications in the industries. For the purpose of overcoming the weak adhesion problems of the CGC on HDG, γ-chloropropyl triethoxysilane (CPTES) was added directly into cold galvanizing coatings (CPTES/CGC). Interface characteristics and related corrosion protection behaviors were investigated by the pull-off adhesion test, water contact angle measurements, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and electrochemical tests. The experimental results revealed that, there is an increase by 19.1% of the CPTES/CGC surface free energy when compared with that of CGC. In addition, Si–O–Si and Si–O–Zn bonds were found in the CPTES/CGC, which indicate new network structures formed inside the CPTES/CGC, between the interface of the CPTES/CGC and HDG substrate, resulting in dry adhesion, wet adhesion, and the cathodic protection time of CPTES/CGC increased by 50% and 200% and 300% respectively compared with the CGC.
Ice accumulation on outdoor surfaces tends to cause a series of serious accidents in extreme climates. In recent years, superhydrophobic coatings have garnered significant interest in the passive anti-icing field owing to their exceptional ability to repel water. However, these superhydrophobic coatings displayed inadequate anti-icing properties in conditions of low temperature and high humidity, as well as poor corrosion resistance after prolonged immersion. Herein, we prepared a series of modified graphene micropillar array superhydrophobic coatings that have various micropillar widths based on simple physical embossing and spraying techniques. These coatings combined the graphene nanosheets modified by perfluorodecyl triethoxysilane (AC-FAS) and the fluorocarbon varnish coating with a micropillar array structure to gain great superhydrophobicity and anti-icing properties. Among these, the average freezing delay time of the Q200G coating increased over 500 times relative to the unmodified Al surface (about 10 s), and its average deicing shear force was as low as 0.1 N. Meanwhile, the corrosion resistance increased steadily as the micropillar width decreased, based on the electrochemical impedance spectroscopy test results. More importantly, such facile fabrication methods and multi-functionality make superhydrophobic coatings hold great application prospects.
This work examines corrosion behavior of EQ70 high-strength steel under anaerobic conditions in artificial seawater containing sulfate-reducing bacteria (SRB). Polarization and electrochemical impedance spectra (EIS) tests were conducted. The results reveal that corrosion rate initially decreased at the beginning of immersion. However, as the immersion time progressed, the corrosion rate of the high-strength steel increased, attributed to SRB reproduction. The scanning electron microscopy (SEM) results demonstrate that the corrosion was more severe in artificial seawater containing SRB compared to that of seawater without SRB. The morphologies of confocal laser scanning microscopy (CLSM) demonstrate that, after 15 days of immersion, the average depth of the corrosion pits on the sample in the artificial seawater containing SRB was nearly double that of the sample in the SRB-free seawater.