The external thermal insulation composite system (ETICS) improves the energy efficiency of buildings, and nowadays, this method is the most popular to insulate buildings in many European Union (EU) countries. The article presents the impact of producing ETICS with expanded polystyrene (EPS) or mineral wool (MW) on the natural environment using the life cycle assessment (LCA) method. The data used in the calculations, related to 2017 real production, were obtained from the externally verified inventory from five manufacturing plants located in different regions of Poland. The LCA of the examined products covered modules from A1 to A3 (cradle-to-gate), according to EN 15804 standard. The study determines and analyses the values of basic indicators related to environmental impacts and environmental aspects of resource use. It comprises indicators calculated for 1 m2 ETICS for five thicknesses of the mentioned thermal insulation materials. Results show that for all environmental indicators, MW systems are characterized by a more negative environmental impact than the equivalent systems with EPS. The study aims to highlight knowledge about ETICS sustainability. The data presented in work are essential for assessment in terms of the sustainable development of ETICS. Such an evaluation is not just a need for the future but a necessity for the present.
External Thermal Insulation Composite System (ETICS) is a commonly used solution in EU countries to increase building energy efficiency. The article describes ETICS in terms of environmental impact from two perspectives, i.e., industry and academia. In EU countries, ETICS manufacturers to place construction products to the market must subject it to the assessment and verification of constancy of performance (AVCP). The basis of this process is the European Technical Assessment (ETA). Based on the number of issued and valid ETAs for ETICS and the number of Environmental Product Declarations (EPDs), the dimension of sustainability issues was discussed. Analysis of one of the environmental indicators (Global Warming Potential—GWP) for ETICS with EPS, XPS, and MW showed only a general trend. However, there are significant differences between the values of the GWP and other environmental indicators that one can use for future AVCP of construction products. In the light of the research described in the paper, it seems reasonable to conclude that AVCP for ETICS in terms of sustainability will be challenging to implement in practice-based only on environmental indicators according to EN 15804. The article also reviews scientific publications on the sustainability of ETICS.
Ceramic tiles and ceramic tile adhesives (CTA) are two impressive materials that have changed construction history. Ceramic tiles could not provide their beauty and durability for buildings when used as a covering both for the inside and exterior finishing without CTA. Nowadays, they are complex multi-component systems. Among the various CTAs, cementitious products are the most commonly used. This article presents an extensive review of the literature, showing how they are perceived in the scientific literature today. In this paper, an attempt is made to review individual adhesives’ ingredients’ effects on their properties, with particular reference to redispersible polymer powders and methylcellulose ethers. The article presents the basics of the CTAs, assessing and verifying the constancy of their performance in force in European Union countries. Furthermore, it gives a critical review of CTA’s normalized measurement methodologies. The study also draws attention to the need to consider measurement uncertainty in decision-making and conformity assessment, supported by an analysis of the results of multi-annual inter-laboratory studies and market surveillance tests. Future research suggestions are also made based on the review, mainly from the adhesive manufacturer’s perspective.
External thermal insulation systems (ETICS) are relevant facade applications of functional components allowing to reduce energy consumption in buildings to fulfill the provisions of nearly Zero-Energy Buildings (nZEBs). ETICS systems generally are made of adhesives, thermal insulation material, renders with mesh reinforcement, primers, and finish coats. Their main parameters are thermal characteristics and durability, both determined by the specific composition of the systems. Growing concerns on the environment and depletion of natural resources drive the need for the determination of the environmental characteristic of ETICS due to its growing market demand. This analysis focuses on a life cycle assessment (LCA) of a commonly used EPS based ETICS system with four different renderings, produced in several locations. The scope of this study concerns raw materials extraction, transport, production, and energy provision up to the finished, packed, and ready-for-sale product at the factory gate. The authors compared the environmental impact allocated to the 1 m2 of the produced system by taking into account the thickness of EPS and within different environmental impact categories. The results of the current impacts were compared to those obtained five years earlier, considering the technological and environmental progress of the production process.
1 April 1997 in Journal of Physical Organic Chemistry