Considering that approximately 20% of the nation's land remains under the occupation of Russian forces, assessing the impact of the invasion in the midst of ongoing conflict is a formidable chal-lenge. However, even the limited available data offers a distressing glimpse into an ecological...
Struvite precipitation from Wastewater involves an excess of ammonium to create a supersaturated initial solution. The remaining fraction can be a threat to the environment. This work combined struvite precipitation and ammonium sorption using natural zeolite to decrease the ammonium level in the effluent. Two approaches of estimation of feed sample doses were used. One consisted of gradient experiments for ammonium precipitation to the asymptotic level and was combined with clinoptilolite to lower the ammonium level in the effluent. This approach used doses of 0.05:1.51:0.61:1 of Ca:Mg:NH4+:PO43− mole ratios, respectively. In contrast, three level design with narrowed NH4+:PO43− range reached 0.25:1.51:0.8:1 for Ca:Mg:NH4+:PO43− mole ratios. The addition of zeolite decreased effluent ammonium concentration. In both ways, the P and N recoveries were higher than 94% and 72%, respectively. The complexity of the precipitation mixture decreased the ammonium sorption capacity (Qe) of clinoptilolite from Qe of 0.52 to 0.10 meq∙g−1 in single and complex solutions, respectively. Thermodynamically, the addition of 1.5 % of clinoptilolite changed the struvite precipitation spontaneity from ∆G of −5.87 to −5.42 kJ·mol−1 and from 9.66 to 9.56 kJ·mol−1 for gradient and three level experimental procedures, respectively. Thus, clinoptilolite demonstrated a positive effect on the struvite precipitation process and its environmental impact.
Natural clinoptilolite tuff (CL) and chabazite-clinoptilolite tuff (CH) were modified in fixed-bed column by immobilization of hexadecyltrimethylammonium bromide (HDTMA-Br), then investigated as a sorbent for inorganic anions of Cr(VI). The proposed modification technique combined with surfactant solution batching allows minimizing the surfactant loses through foaming and crystallization and creation of stable organic coverage. The HDTMA loading depended on the mineral composition of the zeolitic tuff, the topology of its external surface, and process conditions. The maximum surface coverage was obtained by gradually dosing surfactant solution in the smallest volume of batches and corresponded up to 100% and 182% of external cation exchange capacity (ECEC) for mono and double layer coverage, respectively. In case of mono layer coverage, modification proceeds until the exhaustion of surfactant in supply solution, while in the double layer one, until equilibrium of HDTMA concentration in both zeolitic and liquid phases was established. The efficiency of Cr(VI) uptake by prepared surface modified zeolites (SMZs) increased with increasing of HDTMA loading. In the case of mono layer SMZs, the capacities of CH-HDTMA and CL-HDTMA were 10.3 and 5.4 mg/g, respectively, while in the case of double layer SMZs, the amount of Cr uptake on CH-HDTMA and CL-HDTMA were 16.8 and 15 mg/g, respectively. Ion exchange is the predominant mechanism of Cr(VI) sorption but it takes place only if modification resulted in at least partial double layer coverage. The XPS analysis reveals Cr(VI) reduction to a less-toxic Cr(III) by the electron donating N-containing groups and by reaction with Fe+2 ions on the zeolite external surface.
Chabazite, a tectosilicate mineral, belongs to the zeolite group and has been widely used for the adsorptive removal of a number of cationic contaminants from the aqueous phase. However, a negatively charged chabazite surface can be altered by chemical modification in order to change its adsorption abilities towards anions. This study reports the potential for the removal of hexavalent chromium ions from aqueous solutions by modified chabazite. In this regard, natural chabazite was modified by the immobilization of HDTMA-Br to achieve double-layer coverage on its surface, defined as the double external cation exchange capacity. Next, a batch adsorption system was applied to study the adsorption of inorganic Cr(VI) anions from aqueous solutions. The process equilibrium was described by 11 theoretical isotherm equations, while 6 adsorption kinetics were represented by four models. Among those tested, the most appropriate model for the description of the studied process kinetics was the pseudo-second order irreversible model. The obtained results suggest that Cr(VI) adsorption takes place according to a complex mechanism comprising both Langmuir-type sorption with the maximum adsorption capacity of modified chabazite, approx. 9.3–9.9 mg g−1, and the trapping of Cr(VI) inside the capillaries of the amorphous sorbent, making it a viable option for water treatment applications.
Methods of assessing the intensity of plant growth in soils contaminated with elements of heavy metals as a result of military operations can provide important data regarding the migration, bioavailability of chemical compounds for plants, as a result of the formation of chemical compounds, which are key parameters for assessing the phytoremediation potential. The use of various methods of assessing the impact of heavy metals in the soil on plant growth can be evaluated not only based on the degree of environmental risk, but also predict the magnitude of the impact of a complex of chemical elements taking into account synergistic factors based on a statistical assessment based on the Pearson and Spearman complex. It was established that the mutual influence on the formation of active compounds in the soil significantly affects the intensity of plant growth and, accordingly, the negative correlation of the Pearson coefficient with the concentration of heavy metals in the soil for such as Cd, Cr and Ni. A positive correlation in the range of 0.75-0.89 is typical for soil samples with copper, lead, zinc and titanium. The impact of potentially toxic elements on the biometric parameters of plants was determined using germination tests. Slowdown of plant growth in the range of 5-10% was observed for soils with excess content of elements in the following sequence: zinc, lead, nickel, copper, chromium, cadmium and titanium.Statistical analysis was performed based on the results of biometric parameters of plants from germination tests. The application of the t-test (Shapiro-Wilk, p>0.05) established statistical differences in the homogeneity of the dispersion and the normality of the distribution. Under the condition (p=0.05) of normal distribution, the Mann-Whitney test was used. At p>0.05, the Brown-Forsyth test was used to analyze homogeneity of variances with a normal distribution. The use of the Welch test made it possible to establish the fact whether the distribution is normal for homogeneous and heterogeneous dispersion. Based on the Statistica 13.1 program, it was established that the Welch test data confirm the normal distribution of various types of variance.