Juan Antonio Rodríguez-Rama

Mr. Juan Antonio Rodríguez-Rama

orcid
www.igme.es/personal-igme/juan-antonio-rodriguez-rama/

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019
Verified
Conference Paper
Open access
PDF file
ALAna García Laso
Ana García Laso
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
Jorge Luis Costafreda MustelierJorge Luis Costafreda Mustelier
Jorge Luis Costafreda Mustelier
EVElena Nuñez Varela
Elena Nuñez Varela
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
En este trabajo se propone la metodología del Aprendizaje-Servicio (ApS) como una herramienta adecuada para alcanzar los Objetivos de Desarrollo Sostenible (ODS) en el contexto educativo. De hecho, la naturaleza propia del ApS ya lleva intrínseca los ODS: 4. Educación de Calidad y 17. Alianzas para lograr los Objetivos. Desde la Unidad de Emprendimiento Social, Ética y Valores en la Ingeniería (UESEVI) se desarrollan 4 proyectos de ApS en los que hay implicados 7 de los 17 ODS. Se ha realizado un estudio comparativo entre el alcance conseguido de los ODS en España y en Europa, con el objetivo de analizar y medir estos proyectos, y en un futuro poder diseñar proyectos ajustados a aquellos ODS que haya que mejorar urgentemente. García Laso, Ana; Martín Sánchez, Domingo Alfonso; Costafreda Mustelier, Jorge Luis; Nuñez Varela, Elena; Rodríguez Rama, Juan Antonio

14 August 2024 in Sensors
Verified
Journal Article
Open access
PDF file
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
LMLeticia Presa Madrigal
Leticia Presa Madrigal
Jorge Luis Costafreda MustelierJorge Luis Costafreda Mustelier
Jorge Luis Costafreda Mustelier
ALAna García Laso
Ana García Laso
JLJavier Maroto Lorenzo
Javier Maroto Lorenzo
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
Nowadays, indoor air quality monitoring has become an issue of great importance, especially in industrial spaces and laboratories where materials are handled that may release particles into the air that are harmful to health. This study focuses on the monitoring of air quality and particle concentration using low-cost sensors (LCSs). To carry out this work, particulate matter (PM) monitoring sensors were used, in controlled conditions, specifically focusing on particle classifications with PM2.5 and PM10 diameters: the Nova SDS011, the Sensirion SEN54, the DFRobot SEN0460, and the Sensirion SPS30, for which an adapted environmental chamber was built, and gaged using the Temtop M2000 2nd as a reference sensor (SRef). The main objective was to preliminarily assess the performance of the sensors, to select the most suitable ones for future research and their possible use in different work environments. The monitoring of PM2.5 and PM10 particles is essential to ensure the health of workers and avoid possible illnesses. This study is based on the comparison of the selected LCS with the SRef and the results of the comparison based on statistics. The results showed variations in the precision and accuracy of the LCS as opposed to the SRef. Additionally, it was found that the Sensirion SEN54 was the most suitable and valuable tool to be used to maintain a safe working environment and would contribute significantly to the protection of the workers’ health.

21 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LMLeticia Presa Madrigal
Leticia Presa Madrigal
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
Jorge Luis Costafreda MustelierJorge Luis Costafreda Mustelier
Jorge Luis Costafreda Mustelier
MSMiguel Sanjuán
Miguel Sanjuán
JAJosé Luis Parra y Alfaro
José Luis Parra y Alfaro
Concrete and Portland cement-based products are the most widely used materials in the construction industry. According to the Global Cement and Concrete Association (GCCA), 14 billion cubic meters of concrete are consumed worldwide every year. Knowledge of their properties is essential to ensure the quality of concrete products and structures. Knowing the evolution of certain parameters related to their durability makes it possible to prevent situations that affect compliance with quality requirements. Thanks to advances in IoT (Internet of Things) technologies, it is possible to know the evolution of these parameters in real time. The following work pursues the development and application of a prototype to monitor the setting time of concrete. This equipment provides real-time measurements, taking advantage of the Internet of Things (IoT) technology, allowing effective monitoring of the thermal behavior of concrete during its setting process. By measuring the temperature of the process and evaluating the resistance acquired during the setting time, we can correlate these two parameters, thus ensuring their correct evolution and allowing quick action to avoid future problems. For the development of this work, temperature measurements were made during the setting of 12 concrete specimens corresponding to four different mixtures (two types of cement with and without additives), assessed at three setting ages (28, 90, and 180 days). Through detailed experimental tests, the sensor was accurately and reliably validated, showing its ability to detect temperature changes, indicating the initial and final setting time. In addition, it was observed that the integration of the DS18B20 sensor does not compromise the structural properties of the concrete. The prototype’s cost-effectiveness, efficiency, and easy installation make it a valuable tool for construction professionals, offering an innovative solution to ensure the quality and durability of the concrete. This breakthrough could represent a significant step towards the digitalization and improvement of construction processes, with direct implications for the efficiency and sustainability of modern infrastructures.

23 March 2026 in Metrology
Verified
Journal Article
Open access
PDF file
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
LMLeticia Presa Madrigal
Leticia Presa Madrigal
.L. Alfredo Marín Lázaro
. Alfredo Marín Lázaro
JLJavier Maroto Lorenzo
Javier Maroto Lorenzo
ALAna García Laso
Ana García Laso
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
This study presents the metrological validation of encapsulated DS18B20 digital temperature sensors. Eight units were tested, and seven were analysed (sensor 8 was excluded owing to a systematic failure). The evaluation was performed using a standard comparison calibration, where Tref was defined as the mean of two calibrated Pt-100 probes in a Julabo DYNEO DD 601F thermostatic bath, following the TH-001 procedure of the Spanish Centre of Metrology (CEM). Four validation tests were performed: Test 1 (E1, 20 to 75 °C), Test 2 (E2, 20 to 72 °C), and with an extended range, Test 3 (E3, −12 to 86 °C) and Test 4 (E4, −12 to 86 °C; repetition to assess reproducibility relative to E3), with 10 steady-state readings per setpoint. Erroneous readings were defined and removed (probe 3, Test 4), and set points without valid readings from probe 4 above 68 °C were excluded. Without data processing, the errors were consistent with the manufacturer’s stated ±0.5 °C, despite an inter-probe bias. Several correction models were evaluated (offset, affine linear, polynomial, and segmented); the probe-specific affine linear model provided the best overall compromise, reducing MAE (Mean Absolute Error) to 0.046 to 0.130 °C and RMSE (Root Mean Square Error) to 0.057 to 0.169 °C. The process uncertainty is dominated by the traceability of the Pt-100 probes and the effective nonuniformity of the isothermal volume, which limits the achievable accuracy. The results support the use of individually calibrated DS18B20 sensors for continuous monitoring, provided that the effective operating range is maintained.

1 February 2024
Verified
Book Chapter
Closed access
PDF file
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
.L. Alfredo Marín Lázaro
. Alfredo Marín Lázaro
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
JLJavier Maroto Lorenzo
Javier Maroto Lorenzo
Fernando Barrio-ParraFernando Barrio-Parra
Fernando Barrio-Parra
LÁLuis J. Fernández Gutiérrez del Álamo
Luis J. Fernández Gutiérrez del Álamo

7 June 2024
Verified
Book Chapter
Closed access
PDF file
AGAna García-Laso
Ana García-Laso
DSDOMINGO ALFONSO MARTIN SANCHEZ
DOMINGO ALFONSO MARTIN SANCHEZ
LMLeticia Presa Madrigal
Leticia Presa Madrigal
Juan Antonio Rodríguez-RamaJuan Antonio Rodríguez-Rama
Juan Antonio Rodríguez-Rama
Jorge Luis Costafreda MustelierJorge Luis Costafreda Mustelier
Jorge Luis Costafreda Mustelier
JAJosé Luis Parra y Alfaro
José Luis Parra y Alfaro