Morphine (MORPH) is natural alkaloid and mainly used as a pain reliever. Its monitoring in human body fluids is crucial for modern medicine. In this paper, we have developed an electrochemical sensor for submicromolar detection of MORPH. The sensor is based on modified carbon paste electrode (CPE) by investigating the Fe_xW_1-xO₄ ratio in iron tungstate (FeWO₄), as well as the ratio of this material in CPE. For the first time, the effect of the iron–tungsten ratio in terms of achieving the best possible electrochemical characteristics for the detection of an important molecule for humans was examined. Morphological and electrochemical characteristics of materials were studied. The best results were obtained using Fe₁W₃ and 7.5% of modifier in CPE. For MORPH detection, square wave voltammetry (SWV) was optimized. Under the optimized conditions, Fe₁W₃@CPE resulted in limit of detection (LOD) of the method of 0.58 µM and limit of quantification (LOQ) of 1.94 µM. The linear operating range between 5 and 85 µM of MORPH in the Britton–Robinson buffer solution (BRBS) at pH 8 as supporting electrolyte was obtained. The Fe₁W₃@CPE sensor resulted in good selectivity and excellent repeatability with relative standard deviation (RSD) and was applied in real-world samples of human urine. Application for direct MORPH detection, without tedious sample pretreatment procedures, suggests that developed electrochemical sensor has appeared to be a suitable competitor for efficient, precise, and accurate monitoring of the MORPH in biological fluids.

This study demonstrates the complete transformation of almond shell waste into a high-performance carbon material for carbon paste electrode (CPE) fabrication. The biocarbon was synthesized via carbonization at 800 °C and subsequently activated with CO₂, resulting in a semicrystalline structure rich in carbonyl groups—consistent with its lignocellulosic origin (34.25% cellulose, 13.48% hemicellulose, 48.03% lignin). Carbonization increased the total pore volume of carbonized almond (CAR_ALD) by nearly 13-fold and the specific surface area by over two orders of magnitude compared to raw almond (RAW_ALD), while CO₂ activation further enhanced activated almond’s (ACT_ALD) surface area (~19%) and pore volume (~35%). To improve electrochemical performance, Bi₂O₃ doped with Sm was applied as a surface modifier. Comprehensive characterization (N₂ physisorption X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopic Analysis (FTIR), X-Ray Photoelectron Spectroscopic Analysis (XPS), Thermogravimetric and Differential Thermal Analysis (TG-DTA), Cyclic voltammetry (CV), Electrochemical impedance spectroscopy (EIS)) confirmed the material’s structural integrity, graphitic features, and successful modifier incorporation. Electrochemical testing revealed the highest current response (48 µA) for the CPE fabricated from CAR_ALD/Bi₂O₃-Sm, indicating superior electrocatalytic activity and reduced charge transfer resistance. Notably, this is the first report of a fully functional CPE working electrode fabricated entirely from waste material.

Waste vitreous enamels from the heating device production process were used for partial replacement of cement in the mortar and concrete production industry. This waste, due to the high content of heavy metals, is classified as hazardous waste. At the same time, waste vitreous enamels possess pozzolanic activity and belong to class 15 (WEP—generated during the production process of heating devices, premix technology), that is 5 (WETM—generated during the production process of heating devices, classic technology) of pozzolanic materials. The purpose of this research was to develop new composites from these wastes to reduce the deposition of the toxic compounds and reduce their environmental impact. The chemical and physical-chemical characterization and pozzolanic activity of the raw waste materials were studied by a mixture of complementary methods, as well as physical-mechanical characterization and a leaching test of mortar and concrete composites. The results indicate that the replacement of cement with WEP up to 30%, or with WETM up to 20% does not significantly affect the quality of concrete in comparison to the quality of the reference concrete prepared with 100% cement. The leaching test showed no significant release of toxic elements for both obtained composites.

This paper presents the results of the application of hazardous waste slag generated by lignite combustion for the adsorption of ethyl xanthate anions (EX) from aqueous solutions. The starting material (RWS) was washed (WWS) and modified (MWS) and then characterized in detail by using different chemical and physical–chemical techniques (determination of chemical composition and content of heavy metals, X-ray diffraction (XRD), infrared spectroscopy (FTIR), determination of textural properties and point of zero charge). Besides the chemical stability of EX, the influence of the initial pH, mass of the adsorbent, initial concentration, and time on the EX anion removal was tested. The characterization results showed that applied waste slag is a hazardous material with complex mineral and structural properties but with good buffer properties and pH stability, which is also characteristic of the MWS sample. The adsorption experiments showed that modification with Cu(NO₃)₂ and Fe(NO₃)₃ significantly increases the adsorption capacity of the starting slag. Under applied experimental conditions, the maximal adsorbed amount of EX anions on the MWS was 210 mg/g, while equilibrium was obtained after 700 min. The Freundlich model and pseudo-second-order model best fit the results, suggesting the complex mechanism of EX removal by the MWS sample.