The construction sector, a significant consumer of energy, possesses the potential to realize substantial environmental and economic advantages through the adoption of innovative technologies and design approaches. Notably, the Passive House standard, exemplified by energy-efficient single-family homes, emerges as a prominent solution. This study analyzes five external wall systems across multiple stages: (i) a literature review and examination of external wall techniques within the passive standard, utilizing the Passive House Database; (ii) a material and technological assessment of three wood-based and two masonry constructions; (iii) an in-depth thermal performance analysis of selected external partitions; and (iv) a Life Cycle Assessment (LCA) of the external wall systems. Our findings indicate that among the single-family homes built to the passive standard, 50.94% utilized timber constructions, while 34.21% employed masonry. Thermal analysis revealed that the masonry wall, EW-M-01, exhibited superior thermal efficiency with a heat transfer coefficient (U-value) of 0.0889 W/m2K. Meanwhile, the wooden wall, EW-T-01, led its category with a U-value of 0.1000 W/m2K. The LCA highlighted that the wooden wall EW-T-02 presented the lowest integrated non-renewable energy demand (PENTR) at 425.70 MJ/kg and the most favorable Global Warming Potential (GWP), with a reduction of 55.51 kg CO2e. Conversely, the masonry wall EW-M-01 recorded the highest energy demand and CO2e emissions, at 780.96 MJ/kg and 90.59 kg CO2e, respectively. Water consumption was lowest for the EW-T-02 wooden wall (0.08 m3) and highest for the EW-M-02 masonry wall (0.19 m3). Conclusively, our analysis of passive house external walls demonstrates that wood-based systems offer superior performance in terms of materials, thermal efficiency, and LCA indicators, positioning them as the preferred option for sustainable passive construction.
The reduction of carbon dioxide emissions, introduced by the European Union, opened the possibility of conducting experimental works on a new generation of materials—ecological and environmentally friendly ones. Such materials include those which combine raw natural resources with waste subject to disposal. The objective of the performed investigations was an assessment of the influence of fly ashes on selected parameters of building materials. The paper proposes a method of the enrichment of clay with fly ash, which would lead to the neutralization of heavy metals in the burnt matrix, possible oxidation of organic substances present in the ashes, or the destruction of pathogens, as well as an increase of the resistance of the clay ceramics to low temperatures. Clay samples were prepared with the addition of the fly ash from three sewage treatment plants. The experiments encompassed investigations of physical and chemical properties of the fly ash, as well as bending strength tests of the beam-shaped samples heated at temperatures of 20, 300, 500, and 700 °C. The beam halves, resulting from the destruction of the samples during these tests, served for testing the compressive strength. The collected results allowed a comparison of the properties of the samples. The obtained test results confirm the possibility of manufacturing a product modified with the fly ash from the thermal treatment of sewage sludge. The obtained compressive strength of the samples amounted 0.3–2.6 MPa.
The conventional design of steel structure objects relies on a first-order elastic analysis, where the entire object is treated as a set of individual structural elements requiring time-consuming, semi-empirical design calculations. Such an approach leads to inefficient design time and excessive material consumption and may additionally result in designing on the verge of structural safety. The AEC sector's technological and digitization advancement process forces designers to use advanced design methods. Hence, it is necessary to indicate the benefits of using effective optimization. The paper presents a comparative analysis of steel domes using two design approaches: traditional first-order analysis and an advanced second-order analysis. The latter method considers the influence of structural deformation on the magnitude of internal forces. Eight models were developed, varying in terms of the connection's stiffness. The work results identify the differences between the two selected design approaches and present opportunities for further structural performance of steel structures.
In the 21st century, the most advanced digital methods have allowed structure design, analysis and multidirectional optimisation based on multiple parameters. Mathematical algorithms based on proportionality requirements enable the software to create an individual solution for the specified boundary conditions. This is particularly interesting from the point of view of prefabrication and material engineering, which is now more often characterised by the idea of post-Fordism, where the desire for unification does not exclude the creative search for individual solutions. The research presented in this paper attempts to answer how parametric designing conducted on bar trusses can be implemented into the optimisation of structural elements. The methodology employed in the study involved using of parametric design tools to create a symmetrical truss model, assess its advantages and challenges, and consider load cases. The information provided in the conclusion highlights the evolution of parametric design – which has not only revolutionised architecture and construction by inspiring unconventional forms, but has also facilitated the optimisation of design processes, offered new design possibilities and enabled effective control over various modelling aspects, confirming its invaluable role in both architecture and construction.
23 February 2019 in IOP Conference Series: Materials Science and Engineering
The purpose of this research is to examine the innovative concept of veneer-foam beams in bending. The beam consists of two very thin veneer sheets with open cross-section with polyurethane foam filling for extension of stiffness and shape stabilization. A series of medium scale preliminary experimental investigations have been done in the Water Centre of Warsaw University of Life Sciences. Simply supported beams of the length 60 cm and 80 cm with concentrated load were considered. The results are promising for future analysis of veneer-foam elements as secondary beams for glulam grillages.