Kui Hu

Dr. Kui Hu

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
KHKui Hu
Kui Hu
Kui HuKui Hu
Kui Hu
QYQilin Yang
Qilin Yang
Wengang ZHANGWengang ZHANG
Wengang ZHANG
Wengang ZHANGWengang ZHANG
Wengang ZHANG
CKChileshe Kapyelata
Chileshe Kapyelata
Carbon nanotubes (CNTs) can improve the storage properties of modified asphalt by enhancing the interfacial adhesion of recycled polyethylene (RPE) and base asphalt. In this study, the interaction of CNT/RPE asphalt was investigated using molecular dynamics simulation. The base asphalt was examined using a 12-component molecular model and verified by assessing the following properties: its four-component content, elemental contents, radial distribution function (RDF) and glass transition temperature. Then, the adhesion properties at the interface of the CNT/RPE-modified asphalt molecules were studied by measuring binding energy. The molecular structural stability of CNTs at the interface between RPE and asphalt molecules was analyzed through the relative concentration distribution. The motion of molecules in the modified asphalt was studied in terms of the mean square displacement (MSD) and diffusion coefficient. The results showed that CNTs improved the binding energy between RPE and base asphalt. CNTs not only weakened the repulsion of RPE with asphaltenes and resins, but also promoted the interaction of RPE with light components, which facilitated the compatibility of RPE with the base asphalt. The change in the interaction affected the molecular motion, and the molecular diffusion coefficient in the CNT/RPE-modified asphalt system was significantly smaller than that of RPE-modified asphalt. Moreover, the distribution of the asphaltene component was promoted by CNTs, resulting in the enhancement of the storage stability of RPE-modified asphalt. The property indexes indicated that the storage stability was significantly improved by CNTs, and better viscoelastic properties were also observed. Our research provides a foundation for the application of RPE in pavement engineering.

1 February 2019 in Waste Management
Verified
Journal Article
Closed access
Kui HuKui Hu
Kui Hu
yujing chenyujing chen
yujing chen
FNFalak Naz
Falak Naz
CZChangnv Zeng
Changnv Zeng
SCShihao Cao
Shihao Cao

21 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
XYXiang Yan
Xiang Yan
DWDi Wu
Di Wu
Kui HuKui Hu
Kui Hu
Wengang ZHANGWengang ZHANG
Wengang ZHANG
JXJianbao Xing
Jianbao Xing
CYChengxu Yang
Chengxu Yang
To further promote the development of research on direct-to-plant SBS-modified asphalt, this article analyzes the development of direct-to-plant SBS modifiers. Starting from the material composition and mechanism of action, common direct-to-plant SBS modifiers were analyzed and classified into four categories based on their mechanism of action, including the instant dissolution principle, intramolecular lubrication principle, non-granulation principle, and vulcanization principle. From the evaluation of the modification effect, the method of studying the performance of direct-to-plant SBS-modified asphalt is summarized, including fluorescence microscopy, AFM technology, and molecular dynamics simulation technology. From the perspective of practical application, the construction process of direct-to-plant SBS-modified asphalt was discussed, including the design stage, raw material preparation stage, mix design stage, and on-site construction stage. The results show that common direct-to-plant SBS modifiers are primarily SBS with a small particle size (less than 200 mesh) or specific model, supplemented by additives (EVA, naphthenic oil, sulfur, petroleum resin, etc.), which improve melting efficiency and lubricity or make it undergo vulcanization reaction, change the proportion of asphalt components, and improve stability. In the evaluation of the modification effect of direct-to-plant SBS-modified asphalt, the disparity of the direct-to-plant SBS modifier is determined by observing the particle residue after dry mixing. Macroscopic indexes of modified asphalt and modified asphalt mixture are used to determine the cross-linking effect of direct-to-plant SBS modifier and asphalt, and the modification mechanism and modification effect of wet SBS modifier are evaluated at the microscopic level. The development of direct-to-plant SBS-modified asphalt should combine the characteristics of direct-to-plant SBS modifiers and the attributes of field application, targeted research, and the development of high-performance direct-to-plant SBS modifiers and complete production technologies applicable to different regions, strengthen the improvement of modification effect evaluation, and form a complete theoretical system.

2 July 2025 in Energy
Verified
Journal Article
Closed access
yujing chenyujing chen
yujing chen
ASAimin Sha
Aimin Sha
QLQun Lu
Qun Lu
WJWei Jiang
Wei Jiang
Yangsen CaoYangsen Cao
Yangsen Cao
PDPeidong Du
Peidong Du

17 August 2024 in Construction and Building Materials
Verified
Journal Article
Closed access
Kui HuKui Hu
Kui Hu
MLMin Liu
Min Liu
yujing chenyujing chen
yujing chen
XTXianghua Tao
Xianghua Tao
XYXiyao Yu
Xiyao Yu
DZDeqian Zheng
Deqian Zheng

15 January 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Wengang ZHANGWengang ZHANG
Wengang ZHANG
ZJZhi-rong Jia
Zhi-rong Jia
Y.X ZhangY.X Zhang
Y.X Zhang
Kui HuKui Hu
Kui Hu
LDLongting Ding
Longting Ding
FWFang Wang
Fang Wang
Five types of material, styrene-butadiene-styrene block copolymer (SBS), ethyl-vinyl-acetate (EVA), naphthenic oil, maleic anhydride grafted ethylene-vinyl acetate copolymer (EVA-g-MAH) and butylated hydroxytoluene (BHT) were used as the raw ingredients for manufacturing direct-to-plant SBS in this paper. Thirteen kinds of direct-to-plant SBS with different EVA/SBS and naphthenic oil/SBS were prepared as well as the processes diagrammatic sketch of dispersion and swelling of direct-to-plant SBS modifier in bitumen were discussed. Microscopic images of direct-to-plant SBS modified bitumen with different components were obtained using fluorescence microscopy. The micro-images were analysed and quantified with MATLAB software. The influence of key components on the micro-morphology of direct-to-plant SBS-modified bitumen is discussed, followed with the tests on melting points and the melting indexes of direct-to-plant SBS with different EVA/SBS and naphthenic oil/SBS. The performances test of bitumen and bituminous mixture modified by these direct-to-plant SBS were also conducted. Results show that, with the ratio improvement of EVA/SBS or naphthenic oil/SBS, the number of the pixel dot number of area (SBS) in microscopic images increased. Enlargement of the pixel dot number of centre line elongate and the structure fineness was observed, indicating that the dispersion and swelling effect of the SBS modifier in bitumen had been improved. Meanwhile, the macro index, such as the melting point and melting index of direct-to-plant SBS, was also improved corresponding to the increase of EVA/SBS ratio or naphthenic oil/SBS ratio. With the addition of EVA or naphthene oil content, penetration and ductility of direct-to-plant SBS modified bitumen received gradual enhancement, but the softening point and viscosity were found out to be decreased. The high-temperature and low-temperature performances of direct-to-plant SBS modified bituminous mixture can be effectively improved by adding EVA or naphthenic oil. By meeting the required performances of direct-to-plant SBS, modified bitumen and bituminous mixture, the component of direct-to-plant SBS is recommended as, SBS:EVA:naphthenic oil:EVA-g-MAH:BHT is 1:0.1–0.5:0.05–0.2:0.03:0.05. For the compatibleness of SBS with different bitumen are different, necessary tests verification is recommended to be carried out prior to usage.