Kura Alemayehu Beyene

Mr. Kura Alemayehu Beyene

Textile Engineering Department, Ethiopian Institute of Textile and Fashion Technology, Bahir Dar University, Bahir Dar, 1037, Ethiopia
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2022 in Gels
Verified
Journal Article
Open access
PDF file
Esubalew Kasaw Kasaw GebeyehuEsubalew Kasaw Kasaw Gebeyehu
Esubalew Kasaw Kasaw Gebeyehu
XSXiaofeng Sui
Xiaofeng Sui
BABiruk Fentahun Adamu
Biruk Fentahun Adamu
KBKura Alemayehu Beyene
Kura Alemayehu Beyene
Melkie Getnet TadesseMelkie Getnet Tadesse
Melkie Getnet Tadesse
The use of hydrogel in tissue engineering is not entirely new. In the last six decades, researchers have used hydrogel to develop artificial organs and tissue for the diagnosis of real-life problems and research purposes. Trial and error dominated the first forty years of tissue generation. Nowadays, biomaterials research is constantly progressing in the direction of new materials with expanded capabilities to better meet the current needs. Knowing the biological phenomenon at the interaction among materials and the human body has promoted the development of smart bio-inert and bio-active polymeric materials or devices as a result of vigorous and consistent research. Hydrogels can be tailored to contain properties such as softness, porosity, adequate strength, biodegradability, and a suitable surface for adhesion; they are ideal for use as a scaffold to provide support for cellular attachment and control tissue shapes. Perhaps electrical conductivity in hydrogel polymers promotes the interaction of electrical signals among artificial neurons and simulates the physiological microenvironment of electro-active tissues. This paper presents a review of the current state-of-the-art related to the complete process of conductive hydrogel manufacturing for tissue engineering from cellulosic materials. The essential properties required by hydrogel for electro-active-tissue regeneration are explored after a short overview of hydrogel classification and manufacturing methods. To prepare hydrogel from cellulose, the base material, cellulose, is first synthesized from plant fibers or generated from bacteria, fungi, or animals. The natural chemistry of cellulose and its derivatives in the fabrication of hydrogels is briefly discussed. Thereafter, the current scenario and latest developments of cellulose-based conductive hydrogels for tissue engineering are reviewed with an illustration from the literature. Finally, the pro and cons of conductive hydrogels for tissue engineering are indicated.

30 September 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
BABiruk Fentahun Adamu
Biruk Fentahun Adamu
JGJing Gao
Jing Gao
Esubalew Kasaw Kasaw GebeyehuEsubalew Kasaw Kasaw Gebeyehu
Esubalew Kasaw Kasaw Gebeyehu
KBKura Alemayehu Beyene
Kura Alemayehu Beyene
MTMelkie Getnet Tadesse
Melkie Getnet Tadesse
ELErkihun Zelalem Liyew
Erkihun Zelalem Liyew
Skin wound management is a very difficult undertaking in the medical field. There is no information available concerning the wound beneath the bandages. Electrospun nanofibrous wound dressings stand out for their resemblance to extracellular matrix (ECM), increased surface-to-volume ratio, porousness, and capacity to encapsulate or load medications, among other distinctive qualities. Traditional antibacterial loaded electrospun nanofibrous wound dressings do not indicate the state of the wound and constantly release antibacterial chemicals even when there are no bacteria in the wound area. As a result, dressings that can track the condition of the wound and dispense medications as needed are crucial. Self-responsive wound dressings can release medications based on bacterial, oxygen spectra, pH, or infection responsiveness, reducing the need for antibacterial agents. Self-responsive mats, which are wound dressings that can release medications based on response to bacteria, oxygen species, and pH or infections, are required to reduce the overuse of antibacterial agents. Self-responsive electrospun nanofibrous mats can be used to monitor the condition of a wound by altering its color in response to an infection or a change in the pH of the wound. Electrospun nanofibrous wound dressings that are stimulus-responsive (self-responsive) are discussed in this review paper. Self-responsive electrospun nanofibrous wound dressings that are triggered by pH, temperature, light, bacteria, and oxygen species are discussed in detail after self-responsive smart materials or polymers used for electrospun nanofibrous wound dressings are covered in the first section of the review.

19 April 2021 in Textile Research Journal
Verified
Journal Article
Closed access
PDF file
KBKura Alemayehu Beyene
Kura Alemayehu Beyene
DKDegu M Kumelachew
Degu M Kumelachew
The fabrics intended for clothing have more emphasis on their appearance and handling characteristics such as luster, smoothness or roughness, stiffness or limpness, and draping qualities. Nowadays, evaluating fabric touch can be of great interest in the industry to match the quality needs of the consumer and the parameters for the manufacturing process. Throughout this study, the effect of weave types on the surface roughness of cotton woven fabric was investigated and analyzed. Three different weave types namely, plain 1/1, twill 1/3, and sateen 8/3 were investigated. The fabric parameters were 27*20Ne (warp/weft) count of yarn, 38*18 (EPC [Ends per Centimeters]/PPC [Picks per Centimeters]) thread density, and 710 CN/TEX (Cent-newton per Tex) with warp tension was produced by air-jet loom. The findings of this study revealed that the surface roughness values of all the fabrics increased regularly on moving from plain 1/1 weave to sateen 8/3 weave. But, the surface roughness of fabric in the weft direction is higher than in the warp direction. The weave type is statistically significant at a confidence interval of 95% and can effectively be used to describe the surface roughness for both warp and weft direction of woven fabrics. The pairwise comparison reveals that it is statistically significant for weave types in the warp and weft direction of the fabrics. This investigation and analysis of weave types on surface roughness of cotton woven fabrics help textile technologies and manufacturers to consider the weave types during the production of fabrics for different end applications.

30 November 2022 in Textile Research Journal
Verified
Journal Article
Closed access
KBKura Alemayehu Beyene
Kura Alemayehu Beyene
EGEsubalew Kasaw Gebeyehu
Esubalew Kasaw Gebeyehu
BABiruk Fentahun Adamu
Biruk Fentahun Adamu
This study aims to assess the relationship between the surface roughness of cotton plain-woven fabric before and after each pretreatment processing stage. According to the findings of this study, the surface roughness values of desized fabric increased in the warp and weft directions. On the other hand, the roughness of plain-woven fabric reduced in both the warp and weft directions during the scouring, bleaching, and mercerization processes. The weft roughness values of greige, scoured, bleached, and mercerized fabrics are higher than the warp roughness values. Mercerized fabrics provide the smoothest fabric surface compared to other treatment stages. The pretreatment stages have statistically significant impacts on the surface roughness in both the warp and weft directions at a 95% confidence interval. The pairwise analysis reveals that pretreatment of the fabrics in the warp and weft directions is statistically significant for grey with desizing, grey with scouring, grey with bleaching, grey with mercerizing, desizing with scouring, desizing with bleaching, desizing with mercerization, scouring with mercerization, and bleaching with mercerization, but not for scouring with bleaching. Mercerized fabric is highly recommended for producing textile products with unique requirements in terms of tactilely sensitive surface properties.

31 January 2022 in Tekstilec
Verified
Journal Article
Open access
KBKura Alemayehu Beyene
Kura Alemayehu Beyene
CKChirato Godana Korra
Chirato Godana Korra
Nowadays, modeling is used for evaluating and controlling the weft crimp percentage before and after manufacturing plain woven fabrics. Also, modeling assists in estimating and evaluating crimp percentage without complex and time-consuming experimental procedures. The purpose of this study is to develop a linear regression model that can be employed for the prediction and evaluation of the weft crimp percentage of plain woven fabric. For this study, nine plain woven fabrics of 100% cotton were produced with three different wefts thread densities and weft yarn linear densities. From the findings, the effects of weft count and weft density on the weft crimp percentage of the fabrics were found to be statistically significant with a confidence interval of 95%. The weft crimp percentage showed a positive correlation with weft count and weft density. The weft count and weft density have multicollinearity in the model because the variance inflation factors (VIFs) values are greater than one, which are 1.70 & 1.20, respectively. The model was tested by correlating measured crimp percentage values obtained with a crimp tester instrument to the crimp percentage values calculated by a developed linear model equation. The result disclosed that the model was strongly correlated, with a confidence interval of 95% (R² of 0.9518). Furthermore, the significance value of the t-test is not significant for both the measured weft crimp percentage values and the calculated weft crimp percentage values, which means that they do not differ significantly. Crimp percentage is impacted by fiber, yarn, fabric structural parameters and machine setting parameters. This makes the crimp percentage difficult to control and study, but this developed model can be easily used by manufacturers or researchers for controlling and studying purposes. Thus, the model can be used to produce a fabric with a pre-controlled weft crimp percentage. It can also be used to evaluate and predict the weft crimp percentage before and after fabric production.

1 January 2026 in Advances in Polymer Technology
Verified
Journal Article
Open access
BABiruk Fentahun Adamu
Biruk Fentahun Adamu
JGJing Gao
Jing Gao
AJAbdul Khalique Jhatial
Abdul Khalique Jhatial
HEHermela Ejegu
Hermela Ejegu
STShaojie Tan
Shaojie Tan
DGDemesew Ephrem Getahun
Demesew Ephrem Getahun
Croton macrostachyus (CM) is rich in bioactive compounds, including carbohydrates, saccharides, phenolic acids, and diterpenes, known for their antibacterial, wound‐healing, and anti‐inflammatory properties. This study aims to leverage these properties by incorporating CM leaf extract into polycaprolactone–cellulose acetate (PCL–CA) nanofibers to develop advanced wound dressings that prevent infection and promote healing. For the first time, CM leaf extract was successfully integrated into PCL–CA nanofibers via electrospinning. The resulting composite nanofibers were subjected to a comprehensive analysis of their morphology, porosity, crystallinity, thermal stability, hydrophilicity, and mechanical strength. In vitro evaluations assessed antibacterial efficacy, wound healing, cytotoxicity, and drug release profiles. The results demonstrated that PCL–CA–CM nanofibers form interconnected, bead‐free structures with fiber diameters of 326 ± 85 nm to 374 ± 92 nm and a porosity of 61–80%. The mats exhibited significant antibacterial activity, reducing Staphylococcus aureus ( S. aureus ) by 66.77–99% and Escherichia coli ( E. coli ) by 58.18–99%. Cytotoxicity assays confirmed minimal toxicity with cell viability exceeding 70%. Furthermore, nanofibers significantly enhanced cell migration. The incorporation of CM also improved hydrophilicity, swelling capacity, and mechanical strength of the mats. These findings collectively highlight the potential of CM‐loaded PCL–CA nanofibers as an effective advanced wound care application.