Hermela Ejegu

Hermela Ejegu

Auto-generated profile, based on publicly available information

Hermela Ejegu

Department of Textile Engineering, Dire Dawa University Institute of Technology, Dire Dawa, Ethiopia

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2022 in Journal of Natural Fibers
Verified
Journal Article
Open access
LSLeweyehu Sheferaw
Leweyehu Sheferaw
GRGideon K. Rotich
Gideon K. Rotich
HEHermela Ejegu
Hermela Ejegu
YGYohannes Gatew
Yohannes Gatew
Owing to environmental concerns caused by the use of synthetic fibers, there is an urgent need to find new eco-friendly fibers. In addition, conventional cellulosic fibers are becoming costly due to an increase in production cost, therefore, sustainable alternative sources of eco-friendly fibers need to be explored. This study investigates the extraction and characterization of fibers from the Cyperus papyrus plant and evaluates its potential as textile fibers. Cyperus papyrus plant fibers were extracted using water retting and alkaline extraction methods and their mechanical, physical, thermal, and chemical properties were studied. The fiber’s chemical composition was established and alkaline extracted fibers contained 61.82% cellulose, 11.82% hemicellulose, 23.6% lignin, 3.86% ash, and 2.75% extractive while the water-retted fibers contained 57.98% cellulose, 13.45% hemicellulose, 25.42% lignin, 6.07% ash, and 3.15% extractive. The fineness of the extracted fibers was 8.38 and 7.31 Tex for water-retted and for alkaline extracted fibers, respectively. The average tensile strength of the extracted fibers ranged from 26.25 to 31.05cN/Tex. The average elongation of the fibers was between 2.02% and 2.79% while its thermal degradation temperature was as high as 150ºC. Compared with conventional fibers, the extracted fibers have the potential of replacing them based on the properties studied.

1 June 2022 in Journal of Industrial Textiles
Verified
Journal Article
Open access
GDGosa Guta Dabi
Gosa Guta Dabi
YWYeshi Tadesse Wakjira
Yeshi Tadesse Wakjira
HFHermela Ejegu Feysa
Hermela Ejegu Feysa
WAWondwossen Mamuye Abebe
Wondwossen Mamuye Abebe
Nettle and Poly Lactic Acid (PLA) fibers are the strongest and best fibers with valuable potential as reinforcement in a composite. In this study, the development and characterization of a multi-layered laminated fibre reinforced bio-composite from nettle and PLA fiber were performed. Prior to molding, the nettle fibers were treated with chemicals such as Alkali and silane and the influence of chemical treatment on the property of nettle fibers were investigated. The characteristics of raw and chemically treated nettle fibers were investigated through chemical composition analysis, mechanical properties, Fourier transform infrared spectroscopy, scanning electron microscopy and water sorption test. Furthermore physical and mechanical properties of the nettle/PLA bio-composite have been analyzed. Twenty (20) samples of treated and untreated nettle fiber and five samples of nettle/PLA fiber reinforcement bio-composites were tested and the results were averaged for comparison with one another. Based on the results obtained, the treated fiber improves tensile strength, has a more uniform and smaller diameter, a clean surface, and has a good appearance compared to untreated fiber. Laminated bio-composites were found to increase initially with the increase of nettle fiber content till 50 weight % and decrease afterwards. Generally, the bio-composite prepared with an equal weight proportion of nettle and poly lactic acid fiber obtained better mechanical properties and tensile strength. Water sorption test results showed that water uptake ability of treated nettle fibers were lower than raw nettle fibers.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SASolomon Addis
Solomon Addis
HEHermela Ejegu
Hermela Ejegu
MDMessay Dubale
Messay Dubale
WMWondwossen Mamuye
Wondwossen Mamuye
Antimicrobial knitted and woven fabrics were developed from recycled polyester (PET) and silver nanocomposite (SNC) fibers. Two different fabrics were produced from two different blend proportions of the fibers. The antimicrobial properties of fabrics were tested against those of the S. aureus (Gram‐positive) and E. coli (Gram‐negative) bacterial natures, and their yarn properties and hand‐related characteristics were investigated. The results show uneven fabrics properties such as irregularity in thickness and SNC‐recycled PET fiber ratio increase, and the tensile strength decreases while the NEP number increases. This implies that fabrics made from a blend with higher SNC‐recycled PET fiber ratios have higher surface roughness levels, higher bending rigidity, and harder texture. As a consequence, the antimicrobial efficiency of the fabrics was improved as the percentage of SNC increased. The recycled PET fiber within the blended yarn shows a good antimicrobial property (above 90%) observed in all fabrics. The reduction of bacterial colonies was constantly exceeding 90% for both E. coli and S. aureus in all fabric samples.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
HEHermela Ejegu
Hermela Ejegu
BKBipin Kumar
Bipin Kumar
PGPriyanka Gupta
Priyanka Gupta
The aim of this paper is to determine the relaxation behavior of the therapeutic tape under different thermomechanical conditions over different time spans and to analyze the physical and mechanical properties of selected kinesiology tapes. The relaxation test was conducted under a static condition with two extended levels (25% and 50%) for one hour and a dynamic condition for 300 cycles with different loading‐unloading values, strain rates, and temperatures. For both static and dynamic conditions, at a lower strain rate and higher load and temperature, the therapeutic tapes showed higher loss of internal stress and faster losses of efficiency. Under all selected conditions, the tape’s stress has decreased rapidly.

1 January 2026 in Advances in Polymer Technology
Verified
Journal Article
Open access
BABiruk Fentahun Adamu
Biruk Fentahun Adamu
JGJing Gao
Jing Gao
AJAbdul Khalique Jhatial
Abdul Khalique Jhatial
HEHermela Ejegu
Hermela Ejegu
STShaojie Tan
Shaojie Tan
DGDemesew Ephrem Getahun
Demesew Ephrem Getahun
Croton macrostachyus (CM) is rich in bioactive compounds, including carbohydrates, saccharides, phenolic acids, and diterpenes, known for their antibacterial, wound‐healing, and anti‐inflammatory properties. This study aims to leverage these properties by incorporating CM leaf extract into polycaprolactone–cellulose acetate (PCL–CA) nanofibers to develop advanced wound dressings that prevent infection and promote healing. For the first time, CM leaf extract was successfully integrated into PCL–CA nanofibers via electrospinning. The resulting composite nanofibers were subjected to a comprehensive analysis of their morphology, porosity, crystallinity, thermal stability, hydrophilicity, and mechanical strength. In vitro evaluations assessed antibacterial efficacy, wound healing, cytotoxicity, and drug release profiles. The results demonstrated that PCL–CA–CM nanofibers form interconnected, bead‐free structures with fiber diameters of 326 ± 85 nm to 374 ± 92 nm and a porosity of 61–80%. The mats exhibited significant antibacterial activity, reducing Staphylococcus aureus ( S. aureus ) by 66.77–99% and Escherichia coli ( E. coli ) by 58.18–99%. Cytotoxicity assays confirmed minimal toxicity with cell viability exceeding 70%. Furthermore, nanofibers significantly enhanced cell migration. The incorporation of CM also improved hydrophilicity, swelling capacity, and mechanical strength of the mats. These findings collectively highlight the potential of CM‐loaded PCL–CA nanofibers as an effective advanced wound care application.

29 September 2021 in Journal of Engineering
Verified
Journal Article
Open access
PDF file
MDMessay Dubale
Messay Dubale
HEHermela Ejegu
Hermela Ejegu
WMWondwossen Mamuye
Wondwossen Mamuye
SASolomon Addis
Solomon Addis
In order to develop the performance of the bed linen index objectively, the first seven properties of the fabric are selected by twenty-four experts subjectively, and these experts also give the weight for each property according to the necessity. These properties are total hand value (THV), moisture management, abrasion resistance, air permeability, wrinkle recovery, thermal resistance, and drape of fabric. After selecting the properties and the weight for each characteristic, an integrated index for bed linen performance value is developed. Before directly using the value of each property into the equation, normalization of data should be done to shrink the range of the data such that the range is fixed between 1 and 5. The correlation between subjective and objective evaluations was very high (r=0.82). This indicates that the bed linen performance index could be estimated as well.