This paper explores the implementation of an ejector to a micro turbojet engine and analysis of the advantages in terms of acoustic and thrust/fuel consumption. Starting with the analytical equations and a series of numerical simulations, the optimal ejector geometry for maximum thrust was obtained. The ejector was manufactured and integrated with the Jet Cat P80 micro turbo engine for testing. The purpose of this article is to report on an improved geometry that results in no significant increase in the frontal area of the turbo engine, which could increase drag. The tests were completed using various functioning regimes, namely idle, cruise and maximum. For each of them, a comparative analysis between engine parameters with and without an ejector was performed. During the experiments, it was observed that, when the ejector was used, the thrust increased for each regime, and the specific consumption decreased for all regimes. The stability of the engine was tested in transient regimes by performing a sudden acceleration sequence, and one carried out the operating line and the modification of temperature values in front of the turbine for both configurations. For each regime, the acoustic noise was monitored at a few points that were different distances from the nozzle, and a decrease was identified when the ejector was used. The advantages of using the ejector on the Jet Cat P80 turbo jet engine are an increased thrust, a lower specific consumption and a reduced noise level, and at the same time, the integrity of the engine in stable operational states and transient operating regimes is not affected.
This paper aims to conduct an acoustic analysis through noise measurements of a hybrid propulsion system intended for implementation on a drone, from which the main noise sources can be identified for further research on noise reduction techniques. Additionally, the noise was characterized by performing spectral analysis and identifying the tonal components that contribute to the overall noise. The propelling force system consists of a micro-turboshaft coupled with a gearbox connected to an electric generator. The propulsion system consists of a micro-turboshaft coupled with a gearbox connected to an electric generator. The electric current produced by the generator powers an electric ducted fan (EDF). The engineturbo-engine was tested in free-field conditions for noise generation at different speeds, and for this, an array of microphones was installed, positioned polarly around the system and near the intake and exhaust. Consequently, based on the test results, the acoustic directivity was plotted, revealing that the highest noise levels are at the front and rear of the engine. The noise level at a distance of 1.5 m from the turboengine exceeds 90 dBA at all tested speeds. Spectral analyses of both the far-field acoustic signals (measured with a polar microphone array) and the near-field signals (microphones positioned near the intake and exhaust) revealed that the primary contributors to the overall noise are the micromotor’s compressor, specifically the gas dynamic phenomena in the fan (BPF and 2× BPF). Thus, it was determined that at the intake level, the main noise contribution comes from the high-frequency components of the compressor, while at the exhaust level, the noise mainly originates from the combustion chamber, characterized by low-frequency components (up to 2 kHz). The findings from this study have practical applications in the design and development of quieter drone propulsion systems. By identifying and targeting the primary noise sources, engineers can implement effective noise reduction strategies, leading to drones that are less disruptive in urban environments and other noise-sensitive areas. This can enhance the acceptance and deployment of drone technology in various sectors, including logistics, surveillance, and environmental monitoring.
The growth of the urban population and its activity in major cities has led to various public health challenges, including environmental pollution, which are reflected in a decrease in the well-being of societies. This paper presents a predictive tool used to mitigate the noise impact study of commercial centre noise on the surrounding houses, the study being conducted prior to its construction. Before the construction of the supermarket, the sound pressure levels from the façade of the surrounding building are measured to have a background noise level of the analysed area. The noise impact study is made using prediction software in which the houses and the shopping centre buildings are numerically modelled. The main noise sources of the commercial centre, defined in numerical predictions, are represented by the air conditioners, heat pumps situated on the roof and the noise generated by the activities from the supply ramp. The noise impact evaluation is performed at different heights and by determining the number of affected inhabitants. To reduce the number of exposed inhabitants to noise, four technical solutions are presented. The proposed noise solutions are based on technical and economic analyses and also on the urban landscape. The study presents the noise prediction for which the propagation calculus was made according to ISO 9613-2. The noise limits were evaluated according to the Romanian national legislation. The final part of this study presents the noise measurements performed after the construction of this shopping centre and the validation of the implemented noise reduction solution.
Urban natural parks represent a remarkable concept that evokes the coexistence of human habitation with a wild environment, and the associated interactions between human and natural territories. In this context, urban noise infringes upon the natural soundscape, leading to various consequences for both realms. This study seeks to characterize the impact of anthropic noise levels on biodiversity in the urban natural Văcărești Park (Bucharest, Romania), utilizing on-site measurements and software simulation techniques. The study seeks to develop a method for evaluating integrative strategies to mitigate the impact of traffic noise on wildlife in an urban wild park, without addressing the specific effects of noise on the perception and communication of individual species. By calibrating field measurements with laboratory results, a more reliable data set will be used to identify areas where the biophonic environment is impacted by anthropogenic noise. Since human-generated noise in an urban natural park predominantly originates from road traffic and industrial sites, managing traffic noise and its propagation pathways could substantially improve the park’s soundscape. Additionally, this study will apply software simulations for noise reduction strategies, such as vegetation planting and earthen embankments, to obtain suitable solutions and propose plausible and effective actions to authorities for improving the biophonic environment. This research could also serve as the basis for long-term monitoring, allowing for the assessment of the evolution and impact of implemented measures over time.
This study aims to highlight the noise reduction achieved through the integration of serrated blades on the leading and trailing edges within a small-scale cascade configuration relevant to turbomachinery contexts. Experiments were conducted using a newly developed 3D-printed test bench, enabling both acoustic and aerodynamic measurements. Turbulence was generated using a rectangular grid positioned at two axial locations. Non-dimensional spectra were computed and compared with experimental data, showing good agreement over a wide frequency range. Significant noise reduction was observed in the 1000–3000 Hz band, despite the lack of optimization of turbulence and serration parameters. Leading-edge serrations were found to be effective at lower frequencies in the axial direction and at higher frequencies laterally. In contrast, trailing-edge serrations had a minimal impact above 3500 Hz, performing worse than the reference condition across a large frequency range. Nevertheless, for this initial iteration at a small scale, overall sound pressure level reductions of up to 1 dB were achieved with trailing-edge serrations and up to 1.5 dB with leading-edge serrations, underscoring their potential for noise mitigation in relevant applications.
The transition to alternative electrical energy solutions for drone propulsion systems presents several challenges, particularly in managing noise. This noise, compounded by that from the propellers, can produce spectra that are either unpleasant to humans or detrimental to mission objectives. This study explores potential solutions to mitigate noise produced by a micro turboshaft engine, focusing on the solutions’ impact on weight, power output, and acoustic level. We propose two modular, scalable designs—one for the intake and one for the exhaust—based on well-known applications in cold and hot flows. These designs aim to operate effectively across the audible frequency spectrum and incorporate various Helmholtz resonator geometries, including combinations of different lengths, perforated metal sheet parameters, and cavity-filling materials, to enhance bandwidth and noise reduction. Experimental results indicate that these designs can achieve tonal noise reductions of up to 40 dB. While the results are promising, further analysis is required to evaluate the practical applicability and comprehensive impact of these solutions on drone performance.