Mohammad Mannan

Prof. Mohammad Mannan

Professor
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 November 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
IHIsmail Hossain
Ismail Hossain
HAHasanur Zaman Anonto
Hasanur Zaman Anonto
ASAbu Shufian
Abu Shufian
BPBishwajit Banik Pathik
Bishwajit Banik Pathik
MMMohammad Mannan
Mohammad Mannan
PBParag Biswas
Parag Biswas
This study investigates the integration of a Grid-Forming (GFM) Battery Energy Storage System (BESS) to enhance the stability of microgrids in the presence of high renewable energy penetration. The proposed GFM inverter, combined with BESS, significantly improves fault resiliency and oscillation stability compared to traditional Grid-Following (GFL) inverters. The GFM inverter enables fault ride-through (FRT), maintaining operational stability during grid faults with voltage recovery within 300 ms and frequency deviations limited to ± 0.5 Hz. The GFM-controlled system stabilized within 1 s during a 50% solar irradiance drop, supplying reactive power and inertial support, while the GFL inverter struggled to stabilize under a Short Circuit Ratio (SCR) of 0.423, leading to large voltage and frequency deviations. Additionally, during a 46% increase in load demand, the BESS under GFM control immediately compensated for the real power imbalance, demonstrating the crucial role of energy storage in improving microgrid stability. In contrast, the GFL inverter failed to stabilize under similar conditions. Simulation results using MATLAB/Simulink confirmed that the GFM inverter restored microgrid stability more effectively, with faster fault recovery and improved voltage regulation compared to GFL inverters. The implementation of an Energy Management System (EMS) optimized power flow between the PV, BESS, and grid, enhancing system efficiency and participation in energy markets. These findings validate the potential of GFM inverters, supported by advanced control strategies, to provide reliable, efficient, and sustainable microgrid operations, indicating their practical viability in future energy networks.

24 December 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Md. Rifat HazariMd. Rifat Hazari
Md. Rifat Hazari
MMMohammad Mannan
Mohammad Mannan
S.M. MuyeenS.M. Muyeen
S.M. Muyeen
AUAtsushi Umemura
Atsushi Umemura
RTRion Takahashi
Rion Takahashi
Junji TamuraJunji Tamura
Junji Tamura
Wind farm (WF) grid codes require wind generators to have low voltage ride through (LVRT) capability, which means that normal power production should be resumed quickly once the nominal grid voltage has been recovered. However, WFs with fixed-speed wind turbines with squirrel cage induction generators (FSWT-SCIGs) have failed to fulfill the LVRT requirement, which has a significant impact on power system stability. On the other hand, variable-speed wind turbines with doubly fed induction generators (VSWT-DFIGs) have sufficient LVRT augmentation capability and can control the active and reactive power delivered to the grid. However, the DFIG is more expensive than the SCIG due to its AC/DC/AC converter. Therefore, the combined use of SCIGs and DFIGs in a WF could be an effective solution. The design of the rotor-side converter (RSC) controller is crucial because the RSC controller contributes to the system stability. The cascaded control strategy based on four conventional PI controllers is widely used to control the RSC of the DFIG, which can inject only a small amount of reactive power during fault conditions. Therefore, the conventional strategy can stabilize the lower rating of the SCIG. In the present paper, a new control strategy based on fuzzy logic is proposed in the RSC controller of the DFIG in order to enhance the LVRT capability of the SCIG in a WF. The proposed fuzzy logic controller (FLC) is used to control the reactive power delivered to the grid during fault conditions. Moreover, reactive power injection can be increased in the proposed control strategy. Extensive simulations executed in the PSCAD/EMTDC environment for both the proposed and conventional PI controllers of the RSC of the DFIG reveal that the proposed control strategy can stabilize the higher rating of the SCIG.

8 October 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Md. Rifat HazariMd. Rifat Hazari
Md. Rifat Hazari
EJEffat Jahan
Effat Jahan
MMMohammad Mannan
Mohammad Mannan
Narottam DasNarottam Das
Narottam Das
This paper presents a new intelligent control strategy to augment the low-voltage ride-through (LVRT) potential of photovoltaic (PV) plants, and the transient stability of a complete grid system. Modern grid codes demand that a PV plant should be connected to the main power system during network disturbance, providing voltage support. Therefore, in this paper, a novel fuzzy logic controller (FLC) using the controlled cascaded strategy is proposed for the grid side converter (GSC) of a PV plant to guarantee voltage recovery. The proposed FLC offers variable gains based upon the system requirements, which can inject a useful amount of reactive power after a severe network disturbance. Therefore, the terminal voltage dip will be low, restoring its pre-fault value and resuming its operation quickly. To make it realistic, the PV system is linked to the well-known IEEE nine bus system. Comparative analysis is shown—using power system computer-aided design/electromagnetic transients including DC (PSCAD/EMTDC) software—between the conventional proportional–integral (PI) controller-based cascaded strategy and the proposed control strategy to authenticate the usefulness of the proposed strategy. The comparative simulation results indicate that the transient stability and the LVRT capability of a grid-tied PV system can be augmented against severe fault using the proposed FLC-based cascaded GSC controller.

12 May 2021 in Applied System Innovation
Verified
Journal Article
Open access
PDF file
JAJannatul Mawa Akanto
Jannatul Mawa Akanto
Md. Rifat HazariMd. Rifat Hazari
Md. Rifat Hazari
MMMohammad Mannan
Mohammad Mannan
According to the grid code specifications, low voltage ride-through (LVRT) is one of the key factors for grid-tied wind farms (WFs). Since fixed-speed wind turbines with squirrel cage induction generators (FSWT-SCIGs) require an adequate quantity of reactive power throughout the transient period, conventional WF consisting of SCIG do not typically have LVRT capabilities that may cause instability in the power system. However, variable-speed wind turbines with doubly fed induction generators (VSWT-DFIGs) have an adequate amount of LVRT enhancement competency, and the active and reactive power transmitted to the grid can also be controlled. Moreover, DFIG is quite expensive because of its partial rating (AC/DC/AC) converter than SCIG. Accordingly, combined installation of both WFs could be an effective solution. Hence, this paper illustrated a new rotor-side converter (RSC) control scheme, which played a significant role in ensuring the LVRT aptitude for a wide range of hybrid WF consisting of both FSWT-SCIGs and VSWT-DFIGs. What is more, the proposed RSC controller of DFIG was configured to deliver an ample quantity of reactive power to the SCIG during the fault state to make the overall system stable. Simulation analyses were performed for both proposed and traditional controllers of RSC of the DFIG in the PSCAD/EMTDC environment to observe the proposed controller response. Overall, the presented control scheme could guarantee the LVRT aptitude of large-scale SCIG.

17 August 2023 in AIUB Journal of Science and Engineering (AJSE)
Verified
Journal Article
Open access
PDF file
KIKhaleque Insia
Khaleque Insia
AAAbir Ahmed
Abir Ahmed
EJEffat Jahan
Effat Jahan
SASharif Ahmad
Sharif Ahmad
SBSreejon Barua
Sreejon Barua
MMMohammad Mannan
Mohammad Mannan
The growing popularity of electric vehicles on a worldwide scale leads to further research to monitor their performance. The use of Internet of Things (IoT) technology will make it easier to integrate the automated real-time monitoring system with the current electric vehicle technology. The great majority of electric vehicles use rechargeable lithium-ion batteries. Use of lithium-ion batteries creates an overcharging situation in the battery, which significantly decreases battery life. It also increases the possibility of disastrous safety risks due to fire. This paper develops an IoT-based battery management system to minimize hazardous situations. The battery monitoring system (BMS) notifies the user about the condition of the battery in real time.

1 June 2024 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
PDF file
THTonmoy Hassan
Tonmoy Hassan
DDDebraj Das
Debraj Das
SRShahir Islam Rhyme
Shahir Islam Rhyme
SBSupratik Bal
Supratik Bal
Md. Rifat HazariMd. Rifat Hazari
Md. Rifat Hazari
MMMohammad Mannan
Mohammad Mannan
Electricity consumption is rising across all industries. Residential electricity use dominates the sector. Solar photovoltaic (PV) systems on residential roofs are increasing quickly, notably in Dhaka, Bangladesh. PV power generation is high at peak sun irradiance. Due to light loads, residential structures use less electricity. PV system surplus electricity may be transmitted to the national grid. Residential customers may sell power to the government, lowering their electricity expense. Traditional energy meters make it difficult to calculate PV system consumption by load and grid injection. This is possible with net metering. Thus, this study presents an internet of things (IoT)-based smart net energy meter for home users to provide surplus solar PV power and consume grid electricity when needed. With the government's new power tariff rate, the net bill will be calculated automatically. A dedicated mobile application is used to monitor all the activities. The billing statement will be generated automatically, and the payment of that bill will be payable using a redirect link with the same mobile application. The suggested smart net energy meter will inform SMS/mobile app users of gas, smoke, and tempering. The suggested meter's performance and efficacy were evaluated using software simulation and hardware analysis.