Michal Marko

Mr. Michal Marko

Brno University of Technology, Brno, Jihomoravský Kraj, Czech Republic
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
VBVlastimil Bílek
Vlastimil Bílek
PHPetr Hrubý
Petr Hrubý
VIValeriia Iliushchenko
Valeriia Iliushchenko
JKJan Koplík
Jan Koplík
Jakub KřikalaJakub Křikala
Jakub Křikala
LKLukáš Kalina
Lukáš Kalina
The very early stages of alkaline activation of slag control its rheology and setting, but also affect its hydration, which occurs later. Simultaneously, these parameters are dictated by the nature and dose of the alkaline activator. Therefore, we investigated and compared the changes in slag particles (SEM, BET, laser diffraction), as well as in the pore solution composition (ICP–OES), pH, and conductivity, of alkali-activated slag (AAS) pastes containing the three most common sodium activators (waterglass, hydroxide, and carbonate) and water during the first 24 h of its activation. To ensure the best possible comparability of the pastes, a fairly nontraditional mixture design was adopted, based on the same concentration of Na+ (4 mol/dm3) and the same volume fraction of slag in the paste (0.50). The results were correlated with the pastes’ hydration kinetics (isothermal calorimetry), structural build-up (oscillatory rheology), and setting times (Vicat). Great differences were observed in most of these properties, in the formation of hydration products, and in the composition of the pore solution for each activator. The results emphasize the role of the anionic groups in the activators and of the pH, which help predict the sample’s behavior based on its calorimetric curve, and offer data for further comparisons and for the modelling of AAS hydration for specific activators.

10 September 2019 in Materials
Verified
Journal Article
Open access
PDF file
PŠPavel Šiler
Pavel Šiler
IKIva Kolářová
Iva Kolářová
RNRadoslav Novotný
Radoslav Novotný
JMJiří Másilko
Jiří Másilko
JBJan Bednárek
Jan Bednárek
FSFrantisek Soukal
Frantisek Soukal
This work deals with the influence of zinc on cement hydration. The amount of zinc in cement has increased over recent years. This is mainly due to the utilization of solid waste and tires, which are widely used as a fuel in a rotary kiln. Zinc can also be introduced to cement through such secondary raw materials as slag, due to increased recycling of galvanized materials. The aim of this work was to determine the effect of zinc on the hydration of Portland cement, blended with ground blast furnace slag (GBFS). This effect was studied by isothermal and isoperibolic calorimetry. Both calorimetry methods are suitable for measurements during the first days of hydration. Isoperibolic calorimetry monitors the hydration process in real-life conditions, while isothermal calorimetry does so at a defined chosen temperature. Zinc was added to the cement in the form of two soluble salts, namely Zn(NO3)2, ZnCl2, and a poorly soluble compound, ZnO. The concentration of added zinc was chosen to be 0.05, 0.1, 0.5, and 1mass percent. The amount of GBFS replacement was 15% of cement dosage. The newly formed hydration products were identified by X-ray diffraction method (XRD).

18 November 2020 in Materials
Verified
Journal Article
Open access
PDF file
PŠPavel Šiler
Pavel Šiler
IKIva Kolářová
Iva Kolářová
RNRadoslav Novotný
Radoslav Novotný
JMJiří Másilko
Jiří Másilko
JBJan Bednárek
Jan Bednárek
FSFrantisek Soukal
Frantisek Soukal
Increasing utilization of secondary raw materials and alternative fuels results in increasing contents of metals in cements. Zinc is one of these elements. It comes to cement with secondary raw materials such as slag or fly ash or by the utilization of used tires as an alternative fuel. Zinc ions significantly prolong the hydration process in cement. This work deals with the influence of zinc ions in the form of very poorly soluble ZnO salt and easily soluble ZnCl2 and Zn(NO3)2 on the hydration of cement blended with fly ash. Zinc was dosed in the range of 0.05%, 0.1%, 0.5% and 1% of cement weight. The effect of zinc on hydration was monitored by isothermal and isoperibolic calorimetry. A 15% addition of fly ash to cement mainly causes further retardation of hydration reactions due to the reactions of fly ash particles with Ca2+ ions from cement. The strongest effect on the hydration retardation from all investigated compounds showed in ZnO as it dissolves very slowly. On the contrary, for the dosage of 1% of zinc in the form of ZnCl2 significant acceleration of hydration occurred. In this work, a synergistic effect on the prolongation of hydration with a combination of cement, zinc and fly ash was demonstrated. The lengths of induction periods were assessed from detected calorimetric curves and from these lengths the curves were gained by fitting with the exponential function. Final products were next analyzed using X-ray diffraction.

29 October 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
NŠNikola Šuleková
Nikola Šuleková
FSFrantisek Soukal
Frantisek Soukal
RNRadoslav Novotný
Radoslav Novotný
MSMartin Sedlačík
Martin Sedlačík
JŠJiří Švec
Jiří Švec
MMMichal Marko
Michal Marko
This work aims to study whether it would be possible to use alkali metal formates and calcium formate in order to increase the workability of reactive powder concrete (RPC) and how these additives affect hydration, mechanical properties and mineralogical composition of RPC. These substances were added together with superplasticizer. Therefore, paper deals with possibility of increase in workability which would be higher when compared to the sole addition of only the superplasticizer themself. The effect of alkali metal formates and their replacement with calcium formate on slump flow, mechanical properties and pH of RPC was studied. Furthermore, the influence of potassium formate and its replacement with calcium formate and with calcium oxide on the hydration of RPC was observed with the help of isothermal calorimetry and thermal analysis. The results showed that the addition of studied compounds allows to achieve an increase in RPC slump flow. However, it is necessary to add these substances in an optimal ratio of alkali metal formate/calcium formate because a higher content of calcium formate leads to a decrease in slump flow. For ideal ratios, the compressive strength after 90 days is still above 218 MPa and the flexural strength is still above 23 MPa. In calorimetric measurements, it was observed that the addition of potassium formate leads to a decrease in the total amount of heat developed in the induction period. According to thermal analysis, additions of the studied additives to RPC caused changes in the content of portlandite and calcite.

6 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
MMMichal Marko
Michal Marko
PHPetr Hrubý
Petr Hrubý
MJMartin Janča
Martin Janča
Jakub KřikalaJakub Křikala
Jakub Křikala
JHJan Hajzler
Jan Hajzler
MDMartin Doležal
Martin Doležal
The possibility of the formation of an alkali–silicate reaction (ASR) is a crucial issue for the service life of concrete. The coexistence of key parameters such as the presence of alkalis, reactive SiO2, humidity, and temperature predetermine the possibility of its formation and application. When an ASR gel forms, it results in the concreting cracking and spalling as well as in the deterioration of its overall properties. The risk of ASR depends on the concentration of alkalis and their mobility, which influence their ability to penetrate the concrete. The objective of this study was to determine the ionic mobility of not only Na+ and K+, but Ca2+ as well, from external sources (0.5 and 1.0 mol/L solutions of Na/K carbonate, nitrate, and hydroxide) to a cementitious matrix as the precursor for ASR. The concentrations of ions in both the immersion solutions (ICP) and the cementitious matrix itself (SEM-EDX) were studied as a function of time, from 0 to 120 days, for leaching, and according to temperature (25 and 40 °C). The reaction products were characterized using SEM-EDX. Different diffusion rates and behavior were observed depending on the anion type of the external alkali source. Both sodium and potassium ions in all the three environments studied, namely carbonate, hydroxide, and nitrate, penetrated into the composite and further into its structure by different mechanisms. The action of hydroxides, in particular, transformed the original hydration products into calcium-silicate-hydrate (CASH) or ASR gel, while nitrates crystallized in pores and did not cause any changes in the hydration product. The driving force was the increased temperature of the experiment as well as the increased concentration of the solution to which the test specimen was exposed.

30 December 2019 in Különleges Bánásmód - Interdiszciplináris folyóirat
Verified
Journal Article
Open access
PDF file
MBMelinda Biró
Melinda Biró
EBElena Bendíková
Elena Bendíková
MMMichal Marko
Michal Marko
TJTütünkov-Hrisztov Jordan
Tütünkov-Hrisztov Jordan
APAndrea Lenténé Puskás
Andrea Lenténé Puskás
Háttér: A masszázs wellness-turizmus fő (és az egyik legkedveltebb) szolgáltatási kategóriái közé tartozik, így nem véletlen, hogy a szállodák kínálatában megjelenik. Egyre több kutatás bizonyítja a masszázs hatékonyságát és használatának előnyeit a különféle sérülések, betegségek kezelésében, a fájdalomérzet, izomfeszültség és a szorongás csökkenésében és annak mérséklésében. Nemcsak hogy az egészségre pozitívan hat, de fontos szerepe van a kikapcsolódásban, így nem véletlen, hogy a legkedveltebb wellness szolgáltatások egyike. E szolgáltatást a vendégek a fontos tényezők közé sorolják a desztináció választásban (Müller és Könyves 2006). Célkitűzés: Mivel az Észak-Alföldön az idegenforgalom szerepe fontos tényező, így a kutatásunkban a régió 3-5 csillagos szállodáiban néztük meg, hogy a kínálati elemek között milyen szerepet kap a masszázsszolgáltatás. 50 szállodát (18 három csillagos, 31 négy csillagos, 1 öt csillagos) vizsgáltunk meg kérdőív segítségével, valamint weblapjuk elemzésével a szolgáltatásaik és a kínálati elemek tekintetében. Eredmények: a vizsgált szállodák többségében a masszázsszolgáltatás, különböző mértékbe ugyan, de megtalálható. A leggyakrabban előforduló masszázstípusok a frissítő, vitalizáló masszázs, a talpmasszázs, a svédmasszázs, az aromaterápiás masszázs és a relaxáló, stresszoldó masszázs, de emellett sokféle különleges masszázstípust kínálnak a szállodák a vendégeknek. Következtetések: nem csak az emberek üdülőhely megválasztását befolyásoló tényezőinél, de a szállodák kínálati elemeiben is megjelenik az élmény, a kényeztetés, az egészségtudatosság.