This study presents a large-scale green approach for synthesizing ultralong tellurium nanowires with diameters around 13 nm using a solution-based method. By adjusting key synthesis parameters such as the surfactant concentration, temperature, and reaction duration, we achieved high-quality, ultralong Te NWs. These nanowires exhibit properties suitable for use in semiconductor applications, particularly when employed as channel materials in thin-film transistors, displaying a pronounced gate effect with a high switch of up to 104 and a mobility of 0.9 cm2 V−1s−1. This study underscores the potential of solvent-based methods in synthesizing large-scale ultralong Te NWs as a critical resource for future sustainable nanoelectronic devices.
In this study, we propose a method for systematic nanowire length control through the precise control of the polyvinylpyrrolidone (PVP) concentration during the synthesis of tellurium nanowires. Furthermore, we report the changes in the electrical properties of thin-film transistor (TFT) devices with different lengths of synthesized tellurium nanowires used as channels. Through the use of scanning electron microscopy (SEM) and atomic force microscopy (AFM), it was determined that the length of the wires increased in relation to the amount of PVP incorporated, while the diameter remained consistent. The synthesized long wires formed a well-connected percolation network with a junction density of 4.6 junctions/µm2, which enabled the fabrication of devices with excellent electrical properties, the highest on/off ratio of 103, and charge mobility of 1.1 cm2/V·s. In contrast, wires with comparatively reduced PVP content demonstrated a junction density of 2.1 junctions/µm2, exhibiting a lower on/off ratio and reduced charge mobility. These results provide guidance on how the amount of PVP added during wire growth affects the length of the synthesized wires and how it affects the connectivity between the wires when they form a network, which may help optimize the performance of high-performance nanoelectronic devices.
Tellurium nanowires (TeNWs), a typical p-type semiconductor, have attracted significant attention in field-effect transistors (FETs) due to their narrow bandgap and high carrier mobility properties. However, fabricating large-area electronic devices with uniform performance remains a major challenge. In this study, we report a facile solution-shearing self-assembling strategy for fabricating TeNW-FETs with high-performance and uniformity. The solution-shearing process occurs at the interface during relative motion between the substrate and TeNW dispersion, enabling the TeNWs to reorient and adhere to the substrate, forming a uniform nanowire network. The transfer characteristics of TeNW-FETs reveal highly uniform electrical performance, and FET performance is strongly modulated by dispersion concentrations. Moreover, we investigated the impact of the solution-shearing direction on the device performance. The effective field-effect mobility of FETs with channels perpendicular to the substrate movement direction was approximately 12.1% lower than that of FETs with channels parallel to the movement direction. To further demonstrate scalability, we fabricated transistor arrays containing 324 individual FETs on a 4-inch Si/SiO2 wafer, achieving 100% functional device yield and good performance uniformity. The devices exhibited an average ION/OFF ratio of 6.9 × 102, mobility (μeff) of 24.3 cm2 V−1 s−1, subthreshold swing (SS) of 7.9 V dec−1 and threshold voltage (VTH) of 12.0 V.