H. Yang

Dr. H. Yang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SSSagar Shrestha
Sagar Shrestha
SPSajjan Parajuli
Sajjan Parajuli
JPJinhwa Park
Jinhwa Park
HYH. Yang
H. Yang
TCTae-Yeon Cho
Tae-Yeon Cho
YJYounsu Jung
Younsu Jung
Single-walled carbon nanotubes (SWCNTs) have an advantage in printing thin film transistors (TFTs) due to their high carrier mobility, excellent chemical stability, mechanical flexibility, and compatibility with solution-based processing. Thus, the printed SWCNT-based TFTs (pSWCNT-TFTs) showed significant technological potential such as integrated circuits, conformable sensors, and display backplanes. However, the long-term environmental stability of the pSWCNT-TFTs hinders their commercialization. Thus, to extend the stability of the pSWCNT-TFTs, such devices should be passivated with low water and oxygen permeability. Herein, we introduced the silicon nitride (SiNx) passivation method on the pSWCNT-TFTs via a combination of roll-to-roll (R2R) gravure and the roll-to-roll plasma-enhanced vapor deposition (R2R-PECVD) process at low temperature (45 °C). We found that SiNx-passivated pSWCNT-TFTs showed ± 0.50 V of threshold voltage change at room temperature for 3 days and ±1.2 V of threshold voltage change for 3 h through a Temperature Humidity Test (85/85 test: Humidity 85%/Temperature 85 °C) for both p-type and n-type pSWCNT-TFTs. In addition, we found that the SiNx-passivated p-type and n-type pSWCNT-TFT-based CMOS-like ring oscillator, or 1-bit code generator, operated well after the 85/85 test for 24 h.

11 June 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HYH. Yang
H. Yang
LZLyu Zhiyi
Lyu Zhiyi
HLHoo-Jeong Lee
Hoo-Jeong Lee
Tellurium (Te), an attractive p-type van der Waals semiconductor, has been considered a promising candidate in electrical applications due to its unique one-dimensional chiral atomic-helical-chain structure, tunable bandgap, and ultrahigh hole mobility. This review summarizes recent advances in the controlled synthesis of Te semiconductor nanostructures, including one-dimensional tellurium nanowires and two-dimensional tellurene in the form of nanosheets and thin films. We further highlight emerging electrical applications of Te in field-effect transistors, logic circuits, photodetectors, memristors, and artificial synapse devices. Finally, current challenges and future opportunities for the commercialization of Te-based electronic and optoelectronic devices, particularly for neuromorphic and in-sensor computing systems, are discussed.

3 October 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HYH. Yang
H. Yang
MPMose Park
Mose Park
YTYANJIN TANG
YANJIN TANG
HLHyun-Dong Lee
Hyun-Dong Lee
JKJi-Won Kang
Ji-Won Kang
HLHoo-Jeong Lee
Hoo-Jeong Lee
Tellurium nanowires (TeNWs), a typical p-type semiconductor, have attracted significant attention in field-effect transistors (FETs) due to their narrow bandgap and high carrier mobility properties. However, fabricating large-area electronic devices with uniform performance remains a major challenge. In this study, we report a facile solution-shearing self-assembling strategy for fabricating TeNW-FETs with high-performance and uniformity. The solution-shearing process occurs at the interface during relative motion between the substrate and TeNW dispersion, enabling the TeNWs to reorient and adhere to the substrate, forming a uniform nanowire network. The transfer characteristics of TeNW-FETs reveal highly uniform electrical performance, and FET performance is strongly modulated by dispersion concentrations. Moreover, we investigated the impact of the solution-shearing direction on the device performance. The effective field-effect mobility of FETs with channels perpendicular to the substrate movement direction was approximately 12.1% lower than that of FETs with channels parallel to the movement direction. To further demonstrate scalability, we fabricated transistor arrays containing 324 individual FETs on a 4-inch Si/SiO2 wafer, achieving 100% functional device yield and good performance uniformity. The devices exhibited an average ION/OFF ratio of 6.9 × 102, mobility (μeff) of 24.3 cm2 V−1 s−1, subthreshold swing (SS) of 7.9 V dec−1 and threshold voltage (VTH) of 12.0 V.

3 November 2026 in Gels
Verified
Journal Article
Open access
PDF file
LZLyu Zhiyi
Lyu Zhiyi
HYH. Yang
H. Yang
YTYANJIN TANG
YANJIN TANG
HLHoo-Jeong Lee
Hoo-Jeong Lee
Cellulose-based gels are emerging as promising soft materials for tactile electronic skin (e-skin) because of their tunable network structures, mechanical compliance, sustainability, and compatibility with ionic and electronic conduction. This review examines recent progress from material and structural engineering to tactile sensing, machine learning (ML)-assisted signal interpretation, and robotic manipulation. Particular attention is given to regenerated cellulose, nanocellulose, bacterial cellulose (BC), and carboxymethyl cellulose (CMC) systems, together with hierarchical porosity, anisotropic architectures, conductive fillers, and interfacial design strategies that improve sensitivity, sensing range, response speed, and mechanical stability. Representative demonstrations of wearable sensing, spatial pressure mapping, multimodal tactile acquisition, and sensor array integration are summarized and compared. The review further discusses how ML methods can extract task-relevant information from nonlinear and multimodal gel sensor signals, including handwriting, motion, material, texture, and object recognition. Studies on non-cellulosic hydrogel e-skin systems are included where they provide transferable approaches for tactile reconstruction, robotic integration, slip detection, and feedback control. Current evidence supports cellulose-based gels for soft tactile sensing, whereas transferable ML interpretation and robust robot-mounted, closed-loop manipulation remain less extensively validated. Future progress will require closer integration of material design, independent data validation, multimodal sensing, environmental stability, and task-specific robotic evaluation.