Multifunctional nanocomposite coatings were synthesized by reinforcing a polymeric matrix with halloysite nanotubes (HNTs) loaded with corrosion inhibitor (NaNO₃) and urea formaldehyde microcapsules (UFMCs) encapsulated with a self-healing agent (linseed oil (LO)). The developed polymeric nanocomposite coatings were applied on the polished mild steel substrate using the doctor’s blade technique. The structural (FTIR, XPS) and thermogravimetric (TGA) analyses reveal the loading of HNTs with NaNO₃ and encapsulation of UFMCs with linseed oil. It was observed that self-release of the inhibitor from HNTs in response to pH change was a time dependent process. Nanocomposite coatings demonstrate decent self-healing effects in response to the external controlled mechanical damage. Electrochemical impedance spectroscopic analysis (EIS) indicates promising anticorrosive performance of novel nanocomposite coatings. Observed corrosion resistance of the developed smart coatings may be attributed to the efficient release of inhibitor and self-healing agent in response to the external stimuli. Polymeric nanocomposite coatings modified with multifunctional species may offer suitable corrosion protection of steel in the oil and gas industry.

The utilization of self-healing cerium dioxide nanoparticles (CeO₂), modified with organic corrosion inhibitors (dodecylamine (DDA) and n-methylthiourea (NMTU)), in epoxy coating is an efficient strategy for enhancing the protection of the epoxy coating and increasing its lifetime. Fourier transform infrared (FTIR) spectroscopy analysis was used to confirm the loading and presence of inhibitors in the nanoparticles. Thermal gravimetric analysis (TGA) measurement studies revealed the amount of 25% and 29.75% w/w for NMTU and DDA in the nanoparticles, respectively. The pH sensitive and self-release behavior of modified CeO₂ nanoparticles is confirmed through UV-vis spectroscopy and Zeta potential. It was observed, through scanning electron microscopy (SEM), that a protective layer had been formed on the defect site separating the steel surface from the external environment and healed the artificially created scratch. This protective film played a vital role in the corrosion inhibition of steel by preventing the aggressiveness of Cl⁻ in the solution. Electrochemical impedance spectroscopy (EIS) measurements exhibited the exceptional corrosion inhibition efficiency, reaching 99.8% and 95.7% for the modified coating with DDA and NMTU, respectively, after five days of immersion time.

Aerogels, due to their unique features like lightweight, ultra-low thermal conductivity, and design variations, have gotten a lot of interest in thermal insulation, photocatalysis, and protective areas. Besides their superior thermal properties, aerogel thermal insulation and photocatalyst materials also possess many inherent flaws, such as handling issues, high manufacturing costs, and low strength as well as toughness. The most persuasive and successful ways to improve photocatalytic and thermal insulating qualities while lowering costs are composition optimization and microstructure reconstruction. Their high surface area and porosity make them ideal for enhancing the efficiency and capacity of these devices. Research may lead to more efficient and longer-lasting energy storage solutions. This review describes the characteristics, microstructural reconstruction, design variation, and properties of all aerogel fabrication techniques and provides a comprehensive overview of scientific achievements linked to them. The effectiveness of raw material compositions, properties, and mechanical parameters are also discussed. The major goal of this review is to highlight the aerogel-based materials and design variations and to explore the most potential development trends for photocatalysis and thermal applications. The industrial as well as technical applications of silica aerogels are also highlighted. This review highlights futuristic applications of aerogel-based textile materials to alleviate the CO₂ burden on our atmosphere, either by providing next-level thermal insulation or by employing them in CO₂ mitigating technologies such as CO₂ capture.

Corrosion and heat treatment studies are essential to predict the performance and sustainability of the coatings in harsh environments, such as the oil and gas industries. In this study, nickel phosphorus (NiP)–titanium (Ti) nanocomposite coatings (NiP-Ti nanoparticles (TNPs)), containing various concentrations of Ti nanoparticles (TNPs) were deposited on high strength low alloy (HSLA) steel through electroless deposition processing. The concentrations of 0.25, 0.50 and 1.0 g/L TNPs were dispersed in the electroless bath, to obtain NiP-TNPs nanocomposite coatings comprising different Ti contents. Further, the effect of TNPs on the structural, mechanical, corrosion, and heat treatment performance of NiP coatings was thoroughly studied to illustrate the role of TNPs into the NiP matrix. Field emission scanning electron microscope (FESEM) and energy dispersive spectroscopy (EDX) results confirm the successful incorporation of TNPs into the NiP matrix. A substantial improvement in the mechanical response of the NiP matrix was noticed with an increasing amount of TNPs, which reached to its ultimate values (hardness 675 Hv, modulus of elasticity 18.26 GPa, and stiffness 9.02 kN/m) at NiP-0.5TNPs coatings composition. Likewise, the electrochemical impedance spectroscopy measurements confirmed a tremendous increase in the corrosion inhibition efficiency of the NiP coatings with an increasing amount of TNPs, reaching ~96.4% at a composition of NiP-0.5TNPs. In addition, the NiP-TNPs nanocomposite coatings also unveiled better performance after heat treatment than NiP coatings, due to the presence of TNPs into the NiP matrix and the formation of more stable (heat resistant) phases, such as Ni₃P, Ni₃Ti, NiO, etc., during the subsequent processing.

Salinity is a major abiotic stress that affects the agricultural sector and poses a significant threat to sustainable crop production. Nanoparticles (NPs) act as biostimulants and significantly mitigate abiotic stress. In this context, this experiment was designed to assess the effects of foliar application of titanium dioxide (TiO₂) nanoparticles at 200 and 400 ppm on the growth of eggplant (Solanum melongena) seedlings under moderate (75 mM) and high (150 mM) salinity stress. The TiO₂-NPs employed were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM) analysis. The seedlings were assessed physiologically, growth-wise, and biochemically. The seedlings were significantly affected by their physiological attributes (Fv′/Fm′, Fv/Fm, NPQ), growth (root length, shoot length, number of leaves, fresh biomass, dry biomass, leaf greenness), antioxidative enzymes (SOD, POD, CAT, APx, GR), stress indicators (H₂O₂, MDA), and toxic ion (Na⁺) concentrations. The maximum decrease in physiological and growth attributes in eggplant seedling leaves was observed with no TiO₂-NP application at 150 mM NaCl. Applying TiO₂-NPs at 200 ppm showed significantly less decrease in Fv’/Fm’, root length, shoot length, number of leaves, fresh biomass, dry biomass, and leaf greenness. In contrast, there were larger increases in SOD, POD, CAT, APx, GR, and TSP. This led to less accumulation of H₂O₂, MDA, and Na⁺. No significant difference was observed in higher concentrations of TiO₂-NPs compared to the control. Therefore, TiO₂-NPs at 200 ppm might be used to grow eggplant seedlings at moderate and high salinity.

The search for highly effective corrosion protection solutions to avoid degradation of the metallic parts is enabling the development of polymeric organic coatings. Of particular relevance, polymeric nanocomposite coatings, modified with corrosion inhibitors, have been developed to provide enhanced surface protection. In this work, yttrium oxide nanoparticles loaded with corrosion inhibitor (Imidazole), used as additives in the formulation of epoxy for coated on the steel substrate. The loading of Y₂O₃ with imidazole was confirmed by field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and Brunauer–Emmett–Teller analysis. UV-Vis analysis demonstrated the pH-sensitive behavior of the imidazole that helps in self-release when necessary. Electrochemical impedance spectroscopy (EIS) of the coated samples revealed that the coating modified with Y₂O₃/IMD provides better corrosion protection compared to coatings containing only Y₂O₃. XPS analysis validated the presence of an imidazole protective film on the steel substrate that enhanced the corrosion resistance of the coated samples