Nadir Hussain

Dr. Nadir Hussain

Shinshu University Japan
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2020 in Polymers
Verified
Journal Article
Open access
PDF file
MHMotahira Hashmi
Motahira Hashmi
Sana UllahSana Ullah
Sana Ullah
Azeem UllahAzeem Ullah
Azeem Ullah
Muhammad AkmalMuhammad Akmal
Muhammad Akmal
YSYusuke Saito
Yusuke Saito
Ick Soo KimIck Soo Kim
Ick Soo Kim
Cellulose is one of the most hydrophilic polymers with sufficient water holding capacity but it is unstable in aqueous conditions and it swells. Cellulose itself is not suitable for electrospun nanofibers’ formation due to high swelling, viscosity, and lower conductivity. Carboxymethyl cellulose (CMC) is also super hydrophilic polymer, however it has the same trend for nanofibers formation as that of cellulose. Due to the above-stated reasons, applications of CMC are quite limited in nanotechnology. In recent research, loading of CMC was optimized for electrospun tri-component polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and carboxymethyl cellulose (CMC) nanofibers aim at widening its area of applications. PVA is a water-soluble polymer with a wide range of applications in water filtration, biomedical, and environmental engineering, and with the advantage of easy process ability. However, it was observed that only PVA was not sufficient to produce PVA/CMC nanofibers via electrospinning. To increase spinnability of PVA/CMC nanofibers, PVP was selected as the best available option because of its higher conductivity and water solubility. Weight ratios of CMC and PVP were optimized to produce uniform nanofibers with continuous production as well. It was observed that at a weight ratio of PVP 12 and CMC 3 was at the highest possible loading to produce smooth nanofibers.

8 February 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Muhammad Nauman SarwarMuhammad Nauman Sarwar
Muhammad Nauman Sarwar
Azeem UllahAzeem Ullah
Azeem Ullah
Md. Kaiser HaiderMd. Kaiser Haider
Md. Kaiser Haider
Nadir HussainNadir Hussain
Nadir Hussain
Sana UllahSana Ullah
Sana Ullah
Ick Soo KimIck Soo Kim
Ick Soo Kim
Side effects of the drugs’ oral administration led us to examine the possibility of using diclofenac sodium (DLF) in a polymeric drug delivery system based on electrospun polyacrylonitrile (PAN) nanofibers, which can be produced cost-effectively and with good applicability for transdermal treatments. The inclusion of DLF in PAN nanofibers increased the nanofiber diameter from ~200 nm to ~500 nm. This increase can be attributed to the increase in the spinning solution viscosity. FTIR spectra confirm the entrapment of the DLF into the PAN nanofibers. X-ray diffraction pattern showed that the inclusion of the DLF in the PAN nanofibers had caused the misalignment in the polymeric chains of the PAN, thus resulting in a decrease of the peak intensity at 2θ = 17o. The DLF loaded PAN nanofibers were efficient against the gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli), with maximum inhibition zone of 16 ± 0.46 mm for E. coli and 15.5 ± 0.28 mm for S. aureus. Good cell viability ~95% for L929 cells in more extended incubation periods was reported. A gradual release of DLF from the PAN nanofiber was observed and can be attributed to the stability of Pan in PBS medium. Cell adhesion micrographs show that cell-cell interaction is stronger than the cell-material interaction. This type of weak cell interaction with the wound dressing is particularly advantageous, as this will not disturb the wound surface during the nursing of the wound.

19 February 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Nadir HussainNadir Hussain
Nadir Hussain
MMmujahid Mehdi
mujahid Mehdi
MYMuhammad Yousif
Muhammad Yousif
AAAizaz Ali
Aizaz Ali
Sana UllahSana Ullah
Sana Ullah
Ick Soo KimIck Soo Kim
Ick Soo Kim
Plastic bottles are generally recycled by remolding them into numerous products. In this study, waste from plastic bottles was used to fabricate recycled polyethylene terephthalate (r-PET) nanofibers via the electrospinning technique, and high-performance conductive polyethylene terephthalate nanofibers (r-PET nanofibers) were prepared followed by copper deposition using the electroless deposition (ELD) method. Firstly, the electrospun r-PET nanofibers were chemically modified with silane molecules and polymerized with 2-(methacryloyloxy) ethyl trimethylammonium chloride (METAC) solution. Finally, the copper deposition was achieved on the surface of chemically modified r-PET nanofibers by simple chemical/ion attraction. The water contact angle of r-PET nanofibers, chemically modified r-PET nanofibers, and copper deposited nanofibers were 140°, 80°, and 138°, respectively. The r-PET nanofibers retained their fibrous morphology after copper deposition, and EDX results confirmed the presence of copper on the surface of r-PET nanofibers. XPS was performed to analyze chemical changes before and after copper deposition on r-PET nanofibers. The successful deposition of copper one r-PET nanofibers showed an excellent electrical resistance of 0.1 ohms/cm and good mechanical strength according to ASTM D-638.

23 July 2021 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
Nadir HussainNadir Hussain
Nadir Hussain
MMmujahid Mehdi
mujahid Mehdi
SSSajid Hussain Siyal
Sajid Hussain Siyal
RWRano Khan Wassan
Rano Khan Wassan
Samaneh HashemikiaSamaneh Hashemikia
Samaneh Hashemikia
Ick Soo KimIck Soo Kim
Ick Soo Kim

26 December 2020 in Fibers and Polymers
Verified
Journal Article
Closed access
PDF file
Nadir HussainNadir Hussain
Nadir Hussain
Sana UllahSana Ullah
Sana Ullah
MSMuhammad Nauman Sarwar
Muhammad Nauman Sarwar
MHMotahira Hashmi
Motahira Hashmi
Muzamil KhatriMuzamil Khatri
Muzamil Khatri
Ick Soo KimIck Soo Kim
Ick Soo Kim

18 February 2022 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
MMmujahid Mehdi
mujahid Mehdi
Nadir HussainNadir Hussain
Nadir Hussain
Muzamil KhatriMuzamil Khatri
Muzamil Khatri
RHRaheel Ahmed Hakro
Raheel Ahmed Hakro
Abdul GhaffarAbdul Ghaffar
Abdul Ghaffar
KZKe-Qin Zhang
Ke-Qin Zhang